How To Tune Your Flipsky(Vesc) | Basic Setup For Your Flipsky 75200 Pro & BombMoto B1!

For More Vesc Videos & Info Check Out E-force KZbin Channel! - / @e-force-kc
Get your BombMoto B1 here! - bombmoto.com
Amazon affiliate link for a Flipsky 75200 pro v2 - amzn.to/4at6y2g
Or grab a plug & play kit from eforcemotorsandcontrollers.co
Desktop Vesc Tool Link! - vesc-project.c...
help support the channel by joining my patreon! - patreon.com/Em...
BombMoto Electric Dirtbikes group - m.facebook.com...
Mototec Electric Pitbikes Group - www.facebook.c...
Dm/follow me on instagram - / emxbrandon
music by my brother check out his channel on youtube - / theaustinely
if you like video games check him out on twitch too! - / waifuandhusbando
filmed on my insta360 one rs/galaxy s24 ultra
insta 360 affiliate link! - www.insta360.c...
Bikes-
72v mototec qs165
48v razor rsf650 etm kit
72v bombmoto b1
09 ktm 105xc

[@morganmcdougall4259]

Yess brother! The community is going to be stoked with this 🔥🔥🔥 Another great video, I appreciate the hard work bro 🤙🏼

[@EmxBrandon]

Appreciate you brother and taking your time to help others! That's what it's all about!

[@euc_bbq]

Morgan walked me through a lot of this for my son's ebox with a Flipsky. He was very informative but this helps a lot as well since I'll be doing further mods. Appreciate the info

[@EmxBrandon]

Morgan's the man! Hopefully this vid helps for your future projects!

[@BradJ-s2y]

I'm having issues with the MotoTec e&c 72v motor and the vesc, it cogs after just a little throttle, what tips do you and Morgan have for the MotoTec/Xbox/etc.

[@EmxBrandon]

@BradJ-s2y check out these Google drive files drive.google.com/drive/u/0/mobile/folders/1-9_Y7kEmmL6cC9zKed70uAmv2hCIe0mV/1-9hM0fljUbdSJs67jXi6eGgdbebaLKLa?sort=13&direction=a

[@BradJ-s2y]

Still struggling, if I run motor detection and go with those settings, I get cogging at about 5mph, it won't go above the foc

[@deridionentertainment]

He is the only guy that made the vesc tool app make sense for me setting up my scooter 14 inches direct drive dual motor 72v 100ah set up with tronic 2 dual controller.Thanks man . I subscribed just cus

[@EmxBrandon]

I appreciate that! Stoked I could help!

[@DescartesRenegade]

Thanks for making this video. Helps clarify some of these settings.

[@EmxBrandon]

Glad it was helpful!

[@KingKola01]

Thank you bro, i had no idea what field wraning was. I heard it all the time, but no one shows what changing it does. Had my bike jum from 35 to 44 instantly.

[@EmxBrandon]

Hell yeah no problem! Just keep an eye on controller temps and motor temps. Weakening can definitely cause some heat!

[@KingKola01]

@@EmxBrandon sounds good, thanks.

[@noce1071]

great job on the video. I picked up 5 mph with the 12t.

[@EmxBrandon]

Awesome, that's good to know I'll be testing that soon!

[@tredenton132]

Hallelujah. Thank you for making this. I’m 💯 on the vesc bus now. This is probably a stupid noob question but do you know how I can find the specs on a FW11? Pole pair etc…. I don’t even know if it has a temp sensor 🤦🏻‍♂️. Thanks again, this is video is so helpful 🤙🏻

[@EmxBrandon]

No problem! And I'm not sure of all the specs, it's definitely a 5pole pair. You might be able to find all the specs in eforcemotorsandcontrollers.co

[@Hirschelproductions]

Hey I have a domino throttle and after I set everything up on vesc now whenever I turn it on it goes full throttle any idea how to fix it or how to wire the domino and the flipsky

[@EmxBrandon]

What colors are the throttle wires? I've never dealt with a domino before but you make have 3.3v and adc1 backwards.

[@조대진-x7v]

Hi. Thank you for the good information. Can I know the advection that sets the phase current to 240amp when setting the flipsky motor current max? Is esc okay if I set it like that? I'm not sure about the concept of phase current.

[@steamroller1]

Great video...thanks for posting...is this the follow up video to the Flipsky 75200 pro V2 wiring up video you did a month earlier?

[@EmxBrandon]

Yes those videos go hand in hand! Hope it helps!

[@steamrollergofoilsurf6418]

Yes yes...helps a lot!...BUT...at 17:50 you unhighlight and turn Phase Filters "off".. .the flipsky website says for the 75200 PRO V2 alu PCB says Phase Filtering:YES...its the only model ESC that allows phase filtering does it matter if you have it off like that?...ive gotten into the "off" habit too.

[@EmxBrandon]

Wasnt necessarily a habit thing but something I just copied over from the v1. I still have alot to learn about vesc so I'm just keeping it safe until I fully understand what alot of these settings mean.

[@KingKola01]

Hey fam i noticed at 30:13 you have your odometer recorded, every time i turn my system on/off my odometer resets. How did you get yours to stay recorded? I've been searching all the forums and just came back to this video.

[@paulhannah4061]

Hey Brandon, I’m trying to find out exact dimensions for the battery compartment. I’m selling my razor and going to build one of these with a 72450. What size should I get from Allen for the controller to still fit in the compartment too? I don’t have chassis yet to measure. I would like my amps to be more than 100 that’s why I don’t want the bombmoto battery.

[@EmxBrandon]

Hey! They have a list of batterys they make using the b1 battery case! Makes it super easy and you'll still be able to fit the controller

[@wilsoncharles00]

Hey bro i bought my b1 off of the market place. How do i know if i got a v1 or a v2. Basically need. To know which motor i have? If u coupd help me out that would be amazing. Thank u. Great videos btw

[@EmxBrandon]

Are the pegs lowered under the frame? And does the motor have a waterproof 6 pin for the hall sensor? Is so you have a v2, if not you have a v1.

[@wilsoncharles00]

@EmxBrandon thanks brother. Much appreciated. I have the v2 then forsure!

[@schmeglyomigy6174]

This is a bit random but do you have any tips for wheelies? I watched your wheelie video and got some good tips, but I’m still having some trouble. My problem is that I either don’t get far back enough for balance point, or if I do I go too far back. When I get too far back, I hit the brakes too hard which brings me all the way down. However, I don’t want to hit the brakes too softly and then loop out. Any tips for this? Thanks in advance. Also, if it changes anything, I use a fardriver, not a vesc.

[@EmxBrandon]

Honestly it sounds like your on the right path, keep going back further and pressing those brakes. Even if your hitting them too hard your getting it drilled into your reflexes. Eventually you'll start to soften up on the brake and learn to trust it! It's all about seat time and not giving up!

[@sc5102day]

Do all flipsky have bluetooth to setup parameters? Or do you need an extra part?

[@EmxBrandon]

I'm not 100% but most of the ones I know about do.

[@chesteryao]

I have the 75200 pro v2. Do you know if it will work for a 76v battery? Or only 72v

[@Parris2000]

Any chance you know how heavy the b1 is? Thanks

[@EmxBrandon]

It's like 90-95 pounds straight out of the box and probably around 120 after you throw a battery and controller in it.

[@christophermarch8045]

I’m installing on a mxr1500 basically a mototec 1500w, on Vesc it says my hall sensors aren’t detected, got any ideas ? Thanks EMXBrandon

[@Lbcdara]

I’m getting an over voltage fault, check voltage is below limit. Any help lol thanks

[@EmxBrandon]

Just messaged you back on insta

[@ThePunis-Her]

I have a flipsky pro v2 on a bafang. But it gives a hard punch to the motor at the bottom of the gas handle. It feels just like a punch u also hear it. Can i get this away by curving the voltage / amps?

[@EmxBrandon]

I'm not following you, is it cogging or just too much power for you on take off?

[@ThePunis-Her]

@@EmxBrandon I dont know what the problem is. The bike rides about 70 km/h. Its rly fast.. But it just gives a bang/punch at the bottom. Like at 0.1% throttle.... U dont have this on your bike? Might be the BAFANG motor.

[@ThePunis-Her]

English is also my native so. I think the torque kicks in. Like DIRECT DRIVE ..

[@ThePunis-Her]

O the VESC tool says my bike rides 300km/h u know how to fix this?

[@EmxBrandon]

@ThePunis-Her hmm I'm not too sure about the bang at the beginning. Is this a hub drive motor on a scooter? I'm not familiar with bafang

[@Pizza-xi3fs]

Hey when going above 10% throttle my vesc blinks red and cuts out. After a second it comes back.

[@EmxBrandon]

No idea, never dealt with that issue one mine. Screen record the top rt data page as the problem is happening and check for any fault codes.

[@Pizza-xi3fs]

@@EmxBrandon yeah, it says overcurrent error. For some reason a little stock gearing mototec dirt bike is trying to draw 200 amps. When i set it to its default 35a it has almost no torque. hopefully somethings wrong and its not super slow.

[@EmxBrandon]

Your setting battery amps to 35? Not motor amps correct? I'd set battery amps to like 50 and motor amps to 220 with motor absolute amps to 420.

[@Pizza-xi3fs]

@@EmxBrandonThanks for the advice. I ended using the setup again and just leaving the settings as is. Im using vesc 75100, which can only handle 200 amps .Also do motors draw hundreds of amps in vesc, is that meant to be happening?

[@lewebvirtuel9503]

Tuning for a video is not sustaining any AMP out of it; unless your hardware is really VESC made, it's probably china's crap.. or it will become your best paper brick on your desk ! As windows 95 DOS was a better option to get a safe flight. Open source is better supported on the hardware that's has been design on. Over all never use the firmware that has no limits.. or you'll pay the price ;(

[@EmxBrandon]

Interesting I've been running it at 100/250 since this video was made with no issues. And I'm not the only one who's running one flawlessly. Just don't max it out lol.

[@조대진-x7v]

Hi. Thank you for the good information. Can I know the advection that sets the phase current to 240amp when setting the flipsky motor current max? Is esc okay if I set it like that? I'm not sure about the concept of phase current.

[@EmxBrandon]

Hey I'm not sure what your asking?