Still helping people two years later! Thank you so much for sharing your skills! Thanks also to Luke for not dropping the camera!
@shaunphong98852 жыл бұрын
You sir, are a genius! Thank you! Other ways of accessing the drain pipe were so difficult and others taught sucking using a wet dry vac for 5 mins. But blowing it out is so much easier. I used a pneumatic drain blaster instead and omg, I'm totally drip free now!
@254shorttrendystories44 жыл бұрын
KZbin is a lifesaver always get help here and saves way lotsa money ....thanks buddy I just tried the pipe procedure and the clog came out now waiting to see if it will drip again
@pablocapdevila8 ай бұрын
Great video Kevin. I just noticed the air con dripping and followed your steps and now no dripping. Not as much water came out compared to the one in the video but enough to cause it to drip. Thanks again mate cheers.
@astiquer7 ай бұрын
Glad it helped
@matthew77ask Жыл бұрын
Thank you so much - I was confronted with dripping water issue. searched and found your video - and managed to follow the instructions to clear the pipe. Hopefully tonight it works
@celeste37083 Жыл бұрын
Did it work? How did you reconnect the tube?
@alihaydaralqaissy7554 ай бұрын
thanks for your efforts . It helped me a lot. The drain pipe was blocked and water was leaking onto the wall
@ttvtheundeadfarmer2549 Жыл бұрын
Hey just want to say thanks. My aircon started leaking a lot. After watching this video I had it unclogged in 20 mins with only minor swearing. Thanks from Australia!!!
@AMACHiiBiong11 ай бұрын
This is genius! How I wish all brands would have that easy removal panel for the drain hose
@0nikio1327 ай бұрын
Thank you so much! Mine is a mitsubishi, but it's not the same one. Though, I ended up breaking the little clip because it wouldn't budge at all! But the pipe is secured in place regardless.
@monsoonmama2 жыл бұрын
Thank you, this was so helpful. It's not my exact model, but its how it needed to be cleaned. I took off almost every panel of mine trying to gain access to the drain pan to clear the hose before finding this video.
@astiquer2 жыл бұрын
Most welcome 😃
@corbettv3 жыл бұрын
Thanks for the video - on lockdown, don't want to wait 2 weeks for a repairman to fix it. I tried your method but I could not get the hose out. I cut my knuckles and hands up trying but then I took off the front cover (1 screw) and I could see the water tray and the hole where the water would go. I was able to get a big paper straw down there and get a little bleach in there as well as blow some air and water through the line. I filled the reservoir up a few times and it seems to be draining fine now! At least until it can get proper serviced. Appreciate the video!
@astiquer3 жыл бұрын
Sorry to hear that man. Hope you recover soon and well. Take care and stay safe.
@Never2Loud5 ай бұрын
Thank you for sharing. I take my Mitsubishi apart annually to clean the blower wheel and everything inside, but I was always hesitant about that long gray clip holding the tray to the drain tube. I was afraid to break it. Now that you confirmed it's really tight, I'll just press harder next time for better access. At least I was able to use my small pancake compressor to blow-out the line and remove the gunk. Good info!
@jimmzcorp4 жыл бұрын
Bro, lifesaver during Circuit Breaker!
@richardquek282 жыл бұрын
Thanks Mr Kelvin Tan to show this short & sharp video to explain how to solve my air con water leaking problem.. Kam Xia
@krider72965 ай бұрын
Thank you for making this video, it really helped me out to fix the blockage in the drain line.
@astiquer5 ай бұрын
You're welcome!
@zacharylee64053 жыл бұрын
this aircon is so much easier to clean than OLDer designs where you need to lift the whole unit off the wall to access the pipe.
@edwinfoo18652 жыл бұрын
Mine sSame Model Mitsubishi Starmex had leaking issues ...I Follow your method ..Solve my problem ... Thank You and Most Appreciated
@jasonloke22198 ай бұрын
Thanks so much for sharing. At least I know how to handle the problem with minimal equipment. Thanks!!!
@astiquer8 ай бұрын
Glad to help!
@aaronmiranda34523 жыл бұрын
Thanks a lot bro …. Now Malaysia is having a lockdown and my aircond repair guy can’t come so the floor is getting worse so thanks to you bro now it’s now working
@driftwood7772 жыл бұрын
In my case the drain pipe was broken so i had to replace, i have the same model, thanks for showing everything in details🤟
@joemartin21323 жыл бұрын
I just did this and it fixed my problem thank you so much was very easy to do no more leaking water from my unit no more
@hidayahrahman1365 Жыл бұрын
You sir, saved us $100. THANK YOU!
@badaasaab66942 жыл бұрын
Thanks a ton! Saved me unnecessary dismantling which I was about to do.....😁
@indhaylensg75642 жыл бұрын
Thanks ...we apply ur teaching method...aircon now ok🙏
@ahmedfazzaa55732 жыл бұрын
Nice video , thanks all the way from the land down under
@claudiakhoo49773 жыл бұрын
Thank you Kevin! Our leaking ac fixed within minutes 👍
@dartstifler9461 Жыл бұрын
I followed this tutorial a yr back. It helps for my living rm. Now my room just can't unclipped the stupid clip design. The clip suxxxx
@astiquer Жыл бұрын
Exactly, U just have to pressed on it with all your strength and yank it out 🤣🤣🤣
@omargamal65125 ай бұрын
Hey man i love your videos i have an ac which looks just like this one i accidentally dropped a hair tie on the top of the ac i tried to get it out but it fell in from the openings on the top how can i remove the hair tie and should i open the ac and ignore it???
@hzandhzMusic-lj4fg4 жыл бұрын
Thank you to publishing this video. It was very helpful esp in this ockdown period !!!
@nickfrancalangia9586 Жыл бұрын
HUGE lifesaver. Thank you!
@chewhar96622 жыл бұрын
Thanks for the video, hope can solve the leaking problem and save some money, thank you!!!
@SumitDangi007 Жыл бұрын
Thanks a lot 😊 My Ac is working fine now
@Kusmee565313 жыл бұрын
Thank you for this wonderful video.
@mickmarkwick2263 Жыл бұрын
Thanks for the video now I can do my A/C
@MatthewHutchins4 ай бұрын
Very useful thank you saved me $150
@magma842 жыл бұрын
Creative ideas using water hose to catch and unclog the jelly for people who don’t have wet vacuum like me.
@viviantang674 Жыл бұрын
Wonderful video! Really helps !👍🏻👍🏻
@MagicandStars49711 ай бұрын
Thank you God Bless ❤🕊🌷🥰🌻🙏
@astiquer11 ай бұрын
You are so welcome
@implodingslowly2 жыл бұрын
Good job, Luke
@Afshinnekoo Жыл бұрын
Thank you, it was very helpful
@adrianmetcalfe1210 Жыл бұрын
Thanks for this it was a life saver.
@ManishDhadli6 ай бұрын
Thanks so much, solved my issue!
@astiquer6 ай бұрын
Glad it's of help to you
@memexkimo22302 жыл бұрын
thankyou for your video. able to do it easily.
@Sakura-mt8tm2 күн бұрын
My air con is constantly dripping at the water pipe area especially the front. I managed to clean the air filter and try the steps you recommended. I pull out the water pipe but there’s no water coming out. So I wipe the inside dry and put the parts back. But it’s still dripping water and I’m feeling very clueless on this :((
@astiquer2 күн бұрын
@@Sakura-mt8tm it's likely clogging internally and not just the drain pipe. Are u in Singapore? Is yes, easily to call or Whatsapp me @90674867
@pakkuadnan Жыл бұрын
thank you. very useful
@lochyoneil6064 Жыл бұрын
bro, you are a life saver!
@dawanata64229 ай бұрын
Great instruction! Thanks
@astiquer9 ай бұрын
Glad it was helpful!
@popstudioacademy54254 жыл бұрын
This is legit, good!
@chunweichong2109 Жыл бұрын
Hi, I was excited to try when I see your video but to my horror, I realise the installer linked a casing at the area that u have shown. So it’s impossible to remove the panel unless I break that casing. Are you able to advise other ways of assessing the tube?
@MyDayJourney2 жыл бұрын
This my problem all the time thanks for sharing this video
@popstudioacademy54254 жыл бұрын
Kudos for this video, it's awesome!
@EliseDec3 жыл бұрын
Thank you so much for sharing this video. Helps a lot.
@kcajchang3 жыл бұрын
Bro, so useful, thanks a lots.
@Janettan13714 ай бұрын
Hi, is the drain pipe always on the right side (like you show in your video) or can it be on the left side?
@LinksRoyal4 ай бұрын
im no expert. but it always seems to be on the right side?
@markt262 Жыл бұрын
Very helpful, thanks!
@zavierpro63547 ай бұрын
Hi can i ask what if the leak is on the other side,, is it still the same procedure?? Need help ASAP plz
@UreiMiseinen3 жыл бұрын
For some reason I can't get the cloth pipe off. Do I need extra strength since my muscle power not very good.
@michaelleow67434 жыл бұрын
Great tip, thanks! Would you have any tips for removing the front cover of Mitshubishi Starmex? I tried (by 1st removing the tabs and 2 screws), but the front cover just wouldn't come off when i pull outwards. Is there a catch on top or both sides that require a screwdriver to pry open (i am afraid it might crack the cover). Appreciate any tips. Thanks
@wdt48614 жыл бұрын
Have to pull outwards and upwards. Use a bit more strength.
@asvanix3 жыл бұрын
Pull the part of the cover under the louvres *downwards* and then outwards slightly and then upwards. The downward part is the most important.
@nabilalkaff21949 ай бұрын
My aircon cannot on after doing this😢
@thankfuloptimist2651 Жыл бұрын
How do you reconnect the pipe? It isn't explained here.
@IsaacChew Жыл бұрын
Still need to take out the casing and clean out the aircon drain tray. In my case a lot of “jelly” has formed on the tray itself and needs to be removed.
@kiraishagamingАй бұрын
For the blow part. Where does the jelly stuff go to?
@WA_IP28 күн бұрын
They drain out thru the pipe ah. If ur drain pipe is long, must blow really long, really hard.
@-xsyn90842 жыл бұрын
Wow this helps resolve my leaking issue !!! Thank u so much 🙏
@direxxion Жыл бұрын
Thank u for sharing
@hurmanc14364 жыл бұрын
thanks, and if more clear on remove the pip from machine is better But really very good la
@astiquer3 жыл бұрын
Thanks, I have published a new video .kzbin.info/www/bejne/gZO4fGeud9Kdn8U
@sayedhusainjawad61393 жыл бұрын
Thanks very helpful 👍
@rendyyanuar8328 Жыл бұрын
must I whack the side, or can I just press in?
@vgvg82462 жыл бұрын
My Starmex is currently dripping water from the left side instead. Is it also using the same method? There is another hose on the left side?
@astiquer2 жыл бұрын
Hi, water dripping from left or right has got to do with the tilt of the Aircon. If your Aircon is tilted slightly to the left and when the water overflows, it appears to come out from the left. However, since we're no longer in a lock down, you can consider engaging professional help when there's Aircon water dripping. This is important because what that's normally clogging your Aircon is bacteria biofilm and the aircon will be very moldy by now. You can call or whatsapp me at 90674867 or book an appointment with me at booking.astiquer.com/ Hope to see u soon.
@kcteo2000 Жыл бұрын
My starmax drips from the left side of the split unit randomly. Some time it will drip and some time won't, what could be the reason?
@carwashconnoisseur72163 жыл бұрын
What can fix a noisy-sounding indoor air-con caused by a broken fan roller tube blade inside which I have for my 11 year old Daikin Air-Con?
@Thelittlestvick2 жыл бұрын
What about putting the pipe back in? Im kinda having trouble
@Driving_Somewhere Жыл бұрын
Hi can you run water thru the hose to try and clear all the jelly?
@astiquer Жыл бұрын
Hi, it depends. Most comfortable condo and hdb flats in Singapore runs one shared water drain pipe for few airconditioners. Therefore of you push air or water through the pipe, it may be forced out from the other Aircon. If it's air, it pushes out the residue water trapped near the other Aircon, which is not too bad. But if you run a water hose through it, it may result in massive amount of water splashing out of the other Aircon.
@Driving_Somewhere Жыл бұрын
@@astiquer Thanks! Good point there . .. I didn't think of it
@Jwalker00758 ай бұрын
Thank you
@Dad-e5v7 ай бұрын
Thanks 👍🏻
@nickchrappa3 жыл бұрын
Really helped.
@GingerOreo3 жыл бұрын
My trunking is installed directly under the fan coil, how do I reach the pipe?
@famisoul4 жыл бұрын
Thank you!
@zyblack4 жыл бұрын
I just poured bleach down the drain pipe and let it sit for 30 mins before flushing the system with water. See all types of jellies coming out the other way.
@stevenong49424 жыл бұрын
Awesome bro
@jimcarloandrada88514 жыл бұрын
Hi Kevin. The right side of my AC is actually connected to an outside tube, (I think) because it is cemented. Are there any other ways I can unclog it? I think the left side cannot be opened.
@michellechee9994 жыл бұрын
Jim Carlo Andrada same issue as mine
@ngodin70403 жыл бұрын
U have to remove the whole cover which is what i did
@astiquer3 жыл бұрын
Sorry for the late reply, yes, you'll have to remove the Aircon cover and water tray. Please see my latest video in instruction. kzbin.info/www/bejne/gZO4fGeud9Kdn8U Thanks
@Blenduu Жыл бұрын
Someone help, please. Hose is not clogged. Water tray has water in it. It causes health problems for us. Checked for drain clogs---none. How do we adjust DRAIN PAN/TRAY so that is doesn't pool on one side? Please help. Thanks.
@michaeltai92143 жыл бұрын
Kevin ..got 2 questions.. 1.After pulling out ( or disconnecting) that short condensate drainage pipe from that small opening..can you show us how to reconnect it ? That will make it a complete tutorial as i can see many others asking the same question. 2. When You blow into the pvc pipe does the jelly blob it go back into the FCU? or it goes out of the condensate pipe to dischage points ( bathroom or kitchen floor trap etc. Is that correct? Or Should we be sucking it out with vacuum cleaner as what i see in other youtune DIY?
@astiquer3 жыл бұрын
Sorry for the late reply. Thanks for your suggestion. I've just produced a new video, will upload shortly.
@astiquer3 жыл бұрын
Yes, if you have vacuum cleaner that can handle water, vacuuming it is good.
@tanjem11 ай бұрын
@@astiquer size of the tube that is use to unclog ... ?? whatis the size needed ?
@joeytoh86683 жыл бұрын
hello kevin, thanks for the video! your wonderful, but i realised there's a black plastic part that came off from somewhere after cleaning. Possible to advise?
@astiquer3 жыл бұрын
Hi, sorry for the late reply. Do u have a picture of said black colour part? Is it a rubber ring. If it is, it's the rubber seal which is inside the solid pipe connector. However, this part rarely comes out, you'll have to use a flat screw driver to digbit out...as such, it's quite unlikely to be this part. Did someone accidentally break the fan blower blade. It's a solid plastic part. Thanks
@beatriztrama50794 жыл бұрын
you show how to take it apart, what about putting it together again?
@astiquer3 жыл бұрын
How u take it out is how you put it back, just reverse the order. Hope this latest video is helpful kzbin.info/www/bejne/gZO4fGeud9Kdn8U
@thankfuloptimist2651 Жыл бұрын
Exactly where is the part to connect it back? Is it even possible or need dismantle?
@celeste37083 Жыл бұрын
@astiquer Unfortunately this video also doesn't show how to reconnect the tube at all. Should it pop back in or slide in or what?
@sbdeguia78004 ай бұрын
U can instead look for the hose at the back..there shld be one. Then unglog from their day by inserting folded/ twistedgi wire and rotating the wire to rwmive gels inside
@edwinputra39394 жыл бұрын
Thank you si muchhh
@jk352604 жыл бұрын
I used to be able to remove my blower from my blower unit. But it is stuck and I can't pulled it out even after removing the screw in the blower. The blower can still spin without issue. Do you have any suggestion?
@jk352602 жыл бұрын
Problem resolved. The stud at the end rusted but luckily it still can be pulled out with stronger force. The rust was probably due to moisture. Everything works fine after removing the rust and putting a bit of oil.
@BabyBluePrincezz4 жыл бұрын
Hello, will putting back the water pipe is easy?
@astiquer4 жыл бұрын
Yes just push it in and make such it clips
@BabyBluePrincezz4 жыл бұрын
Kevin Tan haha, having issues trying to crack the side open. Will work on it. Thank u.
@astiquer4 жыл бұрын
Well... Even "expert" like me hit and miss a few times as the mitsubishi clip system is really not well designed. Have to make sure that it's fully plunged in, try tugging the pipe to make sure that it doesn't come out easily. Then you should be fine.
@astiquer9 ай бұрын
Doesn't matter, should work just as well.
@cyberazi4 жыл бұрын
but the drip tray piping for my air con is on the left
@rainydays.baker.49034 жыл бұрын
It still drip after suck out all the “jelly water” haiz..... on the left
@starwilde42529 ай бұрын
What if it’s leaking from the other side?
@jeaneslava35582 жыл бұрын
Hard Blow 😀😀😀
@ngshaowei74432 жыл бұрын
How did u open the cap?
@astiquer2 жыл бұрын
Sorry but which cap are you referring to?
@ngshaowei74432 жыл бұрын
@@astiquer the cap u hit
@Raaa1111..2 жыл бұрын
Is this the reason it stops after 5 minutes and then blinks 5 times and stays off?
@Bendover-tq2qf4 жыл бұрын
How do I get the pipe off? Tried pulling it but won’t come off
@astiquer3 жыл бұрын
Sorry for the late reply. Please check out my latest video, it'll show u how to remove the pipe. Thanks
@Maxlee112 Жыл бұрын
Ok now I stuck at how to put it back! 😅
@sadafrao73834 жыл бұрын
Can someone tell about the small buttons on AC
@celeste37083 Жыл бұрын
DOES ANYONE HERE KNOW HOW AND WHERE TO RECONNECT THE PIPE ONCE IT'S BLOWN OUT? THANK YOU?
@reyedengoh5524 жыл бұрын
Where does the jelly go?
@astiquer4 жыл бұрын
Out from the condensate pipe. In hdb flat, the grey color pvc pipe is usually exposed and discharged in the toilet, near the floor trap. In private development, it's usually buried in the concrete and discharge inside the floor trap.
@boiguacci43734 жыл бұрын
bro i tried to clean my STARMEX blower but i can not remove, its stuck on the right side after i remove the screw.
@astiquer4 жыл бұрын
There is a locking screw on the right side of the blower. Slowly turn the fan blower and you'll see one of the blades is missing, that's where you can use a Phillips screw driver to remove said screw.
@boiguacci43734 жыл бұрын
@@astiquer yes bro i already removed that but still stucked
@glenc4034 Жыл бұрын
The pipe too hard to detach, too tight already, no space.