This video will show you how to unlock and change a Husky utility blade.
Пікірлер: 502
@stevescontriano8604 жыл бұрын
Lol. Thanks. I couldn’t figure it out for the life of me
@mattevans60952 жыл бұрын
No kidding. YT saves the day again
@jamesjulson97102 жыл бұрын
Don't feel bad. Got me too. Every utility knife I ever had you took the blade out.
@jameshanson4554 Жыл бұрын
Thanks. Slid that catch down and pulled that blade every which way. KZbin to the rescue!!
@Mawri94 Жыл бұрын
Lmao same, thanks to the person who posted!
@jacob-ox1jr Жыл бұрын
same
@ChefJeanPierre2 жыл бұрын
Thank you so much for taking the time! As easy as it is now I had no idea until you showed us! THANK YOU SIR!!! 😀😀
@Silent_riot Жыл бұрын
I just wanted to say thank you for this video. I have been sitting here for close to 30 minutes trying to figure out how to change my blade. Then I am super stubborn and refused to look it up because I was feeling defeated. Finally gave up and searched and you were the 2nd video that populated based on my search. I am so grateful for you!
@CinWales8 ай бұрын
Same !
@profinance19637 ай бұрын
AMEN!
@2NDFLB-CLERK3 ай бұрын
▪️ I was pulling on it with a wrench for 5 minutes while holding the unlock switch... 🟥
@kevinjermaine3683 жыл бұрын
You, my friend, deserve a Nobel Peace Prize! I just returned my third knife to Home Depot insisting these things were broken!!! 😂🤣😅
@ozzman82 ай бұрын
I was about to do the same.. lol
@TheGammaQuadrant Жыл бұрын
Can you believe that for years after you posted this video? It’s still coming in handy? Thank you so much.
@dnicar2 ай бұрын
For sure! I was literally a minute away from throwing this knife right away! Then I 🤔 hmmm ...... Maybe KZbin.
@Boshtel9874 жыл бұрын
Thanks man I’ve been working with a dull blade for a month because I couldn’t open this utility knife you took a lot of stress off my head
@poolman86763 жыл бұрын
Lol, me too I've been doing roofing with the same blade. It sucks
@LSUsaintsFANS3 жыл бұрын
Ha!! I feel like a dummy. Thank you for the video.
@nonope4599 Жыл бұрын
I wasted an hour trying to open this blade. I would’ve never figured this out. Thank you
@grooveu1965 Жыл бұрын
I've had this utility knife for several years and my wife and I could not figure out the blade change....till your video...Thanks a Bunch!
@mt-jn2vf3 жыл бұрын
Quick, concise, helpful... with a nice and friendly attitude, to boot. Thanks very much for the instruction.
@larryrichardson5167 Жыл бұрын
Still helping folks 3 years later ! Thanks !
@jooleepadoolie2 жыл бұрын
Couldn't get the new blade in, then realized that two were stuck together. Thanks for the video! How they expect anyone to follow the faint drawing on the knife is beyond me!
@garyhowell1183 Жыл бұрын
I thought I had the same problem. It turned out my new replacement blade has a new "feature"; it's 50% thicker. That prevented installing in the knife. A standard replacement worked fine.
@jgshurts2 жыл бұрын
The blade release mechanism on this thing is beautiful - once you figure it out. And like a lot of others in the comment thread, I was dealing with a dull blade because I couldn't figure it out. You've made my Amazon-box-breaking-down chores a lot easier. Thanks!
@poolman86763 жыл бұрын
Well I'm glad I'm not the only lame one. It took me 15 minutes before I swallowed my pride enough to watch your video. Thanks a lot bro
@claudiospagnolo15543 жыл бұрын
🤣😂😅😭👍
@poolman86763 жыл бұрын
@catonic that's why you have to love youtube. They make a stupid people feel even more stupider
@edmundhardimon13669 ай бұрын
Thank you. Amazing how something so simple can be so difficult
@aadisriram2 жыл бұрын
OMFG! I almost cut my hand with the instructions printed on the blade, you are a life and finger saver! Thank you sir for your amazing help.
@213DAMAR3 жыл бұрын
Thanks man! Really! I bought this utility knife months ago and couldn't figure out how to take the damn blade out!? I was about to chuck it, but kept it. So i ended up buying the same husky knife (thinking the old one was crap), than discovered i couldn't take that damn blade out either!? Than, a "light bulb idea" of checking youtube for the solution came to mind, sure enough, your sanity-saving video popped up! Problem solved! Thanks again! I can use both now!👍
@ireneschihuahuas13 жыл бұрын
Could not get it without this useful video. Thanks.
@myaudlife43993 жыл бұрын
Dude you’re a life saver, was tired of trying to figure it out myself haha
@StylishDTailors2 жыл бұрын
Thank you!! I was about to just go out and buy a whole new knife because I’ve been using a dull one for months now!
@alanpules41053 жыл бұрын
I did this once before about 2 years ago and forgot how to change it. Thanks to your video I got to change my blade, and in a 'nick of time'! Thanks, you are appreciated!! 😎👌
@czscorpio Жыл бұрын
You saved the day my G! Got frustrated and wss just about to to return it at Home Depot. Then I decided to check KZbin for an answer...Thank you!
@psychjay Жыл бұрын
I spent an embarrassing amount of time trying to figure it out knowing I could have gone to YT at any time. My stubborn self thanks you good sir.
@biffmtz3 жыл бұрын
Dude, seriously simple and easy. Made my life just a little bit better. Thanks for taking the time to make the video.
@redrocket5183 Жыл бұрын
cheers for posting this Chris...your tip[sic] kept the workbench from overflowing with this ol'mechanic's blood !
@Njkdlasrtybw Жыл бұрын
Thank you! Saved me another 15 minutes of trying to figure this out!!
@rolandcomfort37943 жыл бұрын
Thanks. Thank God for youtube and people like you who take the time to help with things that seem dumb but they're not. 28k views helped a lot of people.
@jose.luis.ayala.10 ай бұрын
You ARE to be admired & praised. I, like MANY others couldn't for the life of me figure this simple mechanism out.👍👌🖐️✊👊✌️🙂💯
@grhurley2 жыл бұрын
You are an angel sent from heaven. We have several box cutters here and they are all different in how you change out the blade.
@hughrosen514611 ай бұрын
I’ve redone kitchens and bathroom from the studs. But I literally could not figure it out how to replace this dang blade. This video changed my life! Thanks :)
@TheKennyhes2 жыл бұрын
Thank You....Funny how things are so easy when you know how...I couldn't figure this out after owning the knife over two years!!!!
@4uafunguy3 жыл бұрын
Thanks man! I through out the package never thinking that husky would jack with us and I would need to read the how to. I been pulling back the release button and trying to pull the blade back like every other utility knife. So frustrating . This video saved me from tossing the knife out
@srbinsajuga33262 жыл бұрын
There is a diagram on the knife. I didn't see it either.
@ducktapepilotАй бұрын
You're a life saver! I was trying to use the instructions on the side with no luck lol. Thank you!
@darrenrubendall30204 жыл бұрын
Thanks. Could not figure this out to save my life!
@annettegiovia6270 Жыл бұрын
OMG! I have been trying for over an hour to get the blade out!! So simple!! THANK YOU!!!
@raulcasanova11903 жыл бұрын
Dude Thank you so much for the past year I couldn't figure it out. I purchased a cobalt and I actually loved it and simple to replace blade but I lost it while working so I came back to my Husky trying to figure it out for an hour when my son told me to KZbin it an came upon ur video, Thanks again, it's amazing figuring out something so small can make your whole day feeling accomplished and great.
@Learn2Paint3 жыл бұрын
Thanks for sharing this info. You made it so simple and easy. Three people looked at the knife and couldn't figure it out.
@yellowcake.2 жыл бұрын
Thank you....next to impossible for me without this video.
@nurserachel55 Жыл бұрын
thank you. I could not survive without youtube!
@gbmchilloutcontent5082 Жыл бұрын
Thank you so much! I have like 10 of them and always buy new ones and just made peace with it that I would never figure it out.
@jpet71 Жыл бұрын
Thanks! My knife has an illustration, but it's not very clear. This was a perfect explanation. And nearly 100K views over 4 years tells me I'm not alone!
@beatajensen6054 Жыл бұрын
Thank you for making this video, I could not figure it out my self. I was ready to go back to Home Depot. I hate to do that in the middle of a project. You save the day!!!
@eddiejanekjr.53723 жыл бұрын
Thank you so much for posting this video of changing blade on Husky box cutter. I struggled with trying to figure out the process for about 30 minutes then said "to Heck with it" and pulled up your video! I know it takes time to uplaod a video so again "THANK YOU" for the time and effort of posting. So simple after watching the process!!
@dustincollins456010 ай бұрын
Thx, without this video, I never would've got it open
@goglises Жыл бұрын
Oh dude, you are a saving time giver, I was pulling the blade straight, and doesn't move a millimeter. :) Really appreciate your help!
@DarronBowman4 жыл бұрын
Thank you so much for getting right to the point. You have no idea how many videos I watched to to figure out what you showed me in 33 seconds. Thank you once again. And yes I will subscribe and like.
@chrisparcelrealtor29904 жыл бұрын
Haha all good Darron. The only reason I made this video was because of the same frustration. I actually feel like this video was even too long. Best of luck.
@seanlodge65323 жыл бұрын
Good god.... I needed this video! How something so simple could be so hard is amazing!
@1elisemarie2 жыл бұрын
You’re the best!! Saved me a HD trip to buy a new knife for my DYI project.
@WashburnIchabod3 жыл бұрын
THANK YOU! I have been letting the expletives fly trying to figure this out.
@dewberryone212911 ай бұрын
Thanks have been trying to figure this out for at least 5 minutes. Milwaukee is my favorite because I didn’t need to watch a video just to change the blade.
@kevinhumphreys85543 жыл бұрын
Best 30 second video I have seen. How embarrassing that the instructions are on the side of the blade, I didn’t even notice. Thank you, I was also one step away from prying this thing open.
@brucerock271Ай бұрын
I got this knife used, delivery man left it and didn't want to com back for it. After viewing this video I can tell there was, at one time, a sketch showing how to do it. That had faded from use. Thank you for taking the time to post this video.
@Climate_Hoax3 жыл бұрын
I was looking to find a way to get this blade out of this thing, or end my life with the dull blade. Luckily for the woman who cleans my house, I found your video. I've been pushing that slide forward and pulling on this dull blade since 1979 and came close to slicing my finger and my thumb off several times. Thank you posting this video.
@l.j.29173 жыл бұрын
Omg the best 33 seconds of my life! I was struggling for about 5 min. So glad I came to youtube for the answer!
@markmartin12638 ай бұрын
So easy a Caveman can do it. But I had to watch your video to figure it out I was praying the top up like a regular knife. I'm glad I watched your video Thanks for posting
@Tony-hx2fj2 жыл бұрын
THANK YOU, I HAVE OWNED MINE FOR YEARS AND HAVE THE ORIGINAL TIRED BLADE IN IT !!!!!!!!!!!!!
@MichaelGregorash Жыл бұрын
*Gibbs head slap* thank you for posting that! I literally spent too much time trying to figure out why I couldn’t figure it out. Appreciate you!
@faridjahed2 жыл бұрын
I got a couple of these utility knives and could change the blades on them up to now Thanks to your video
@charlesbryan3005 Жыл бұрын
Thanks very much for making this video. I have been trying to pull the blade straight out….with no luck!
@mariamatos-burns5025 Жыл бұрын
I hope you have a blessed Merry Christmas and a wonderful new year. I have been trying to change the blade on this cutter for a month and was ready to toss it out when i thought... I can't be the only one having trouble with this darn thing and so I went to youtube. Thank you for taking the time to do this. You've made one soul on this planet very very happy.
@MadManUSMC8 ай бұрын
Cannot believe it was the metal plate moved as well... Thanks so much for making a video for this mystery.
@BruceP Жыл бұрын
First, I can't believe I had to look for a video on how to do this. Second, thanks for making a video on how to do this!
@chrisballas3356 Жыл бұрын
Thanks! So simple yet so difficult to figure out
@121790tyler Жыл бұрын
I kept looking at instructions and couldn't figure out step 2 good thing for you and KZbin
@billllllllllly2 жыл бұрын
Easiest thing ever and I couldn't figure it out lmao. Thank you.
@MissJoeyXАй бұрын
Thanks! I'm another one who was confused. Appreciate your video help!
@janbrewington77715 ай бұрын
I cannot tell you how much I appreciate this video and you figuring it out because I was trying to pull up rather than push down. I finally got that stupid blade out thank you thank you thank you.
@VinylNerdDesign6 ай бұрын
Thank you! No way I was figuring that out without this!
@ivancastaneda94183 жыл бұрын
Thank you so much... this was taking me forever to figure out
@rob_v_nj Жыл бұрын
Thanks, i probably couldnt have read that direction in my 20s, Thanks for making it 30 seeconds and not 30 minutes.
@omalouis82912 жыл бұрын
I would not have figured this out,even with the drawing on the tool. Thank you!
@courtneyjones67673 жыл бұрын
Thank you!!!! Someone showed me how and I got a new one and couldn't figure it out again. 😁
@myownruin1873 жыл бұрын
Been racking my brains for 15 minutes I I finally gave up, thank you 🙏🏻
@paulmartin769 Жыл бұрын
It's been driving me nuts! Thank you!!
@KatieSalley7 күн бұрын
Still helping, 5 years later! Thanks!
@urirknme4172 Жыл бұрын
Thank you. Exactly what I needed and to the point.
@andersmartinson17503 жыл бұрын
Thanks! I guess that’s what the diagram on the blade cover shows, but I sure couldn’t figure it out without you.
@fattybuccha721903 жыл бұрын
Thank you so much! You are a genius, a gentleman and a scholar.
@jsmith91054 жыл бұрын
Thank you for posting this
@cooney9 Жыл бұрын
Thank you so much. It was so easy once you saw it demonstrate it.
@cherylschram862 Жыл бұрын
Wow. That quick huh. They sure made it a mystery. Thank you!!
@frankf482 жыл бұрын
Thanks. Ihave been yanking on this blade to switch a new one. So easy now.
@sharondaugherty389 Жыл бұрын
Thank you so much. I’ve been fooling with this thing for 30 minutes trying to figure it out. You mad3 it sooo simple. 😂
@vcader6 ай бұрын
🙏🏻 Bro. I can’t believe I couldn’t figure this out on my own as a mechanical engineer … even when I look closely at those tiny instructions printed on the blade holder. No, I can only imagine how many people got their fingers sliced up trying to figure this out!
@lynndarcey71613 жыл бұрын
Thanks so much! I’ve been trying to figure out that “pull this down” motion for a week! So simple once I watched your video.
@kylekincaid93043 жыл бұрын
I appreciate the video! Was losing it trying to figure it out.
@xelliottisme2 жыл бұрын
Thank you for the "duh" instructions...you made it sooooo easy.
@ua7872 жыл бұрын
Omg! Thank you Thank you Thank you! This was driving me nuts on how to remove blade!
@ktgage4 ай бұрын
Got this on sale and was like this is probably why it's on sale you can't open these. Thanks for this video man saved me a trip to HD
@engganeshwani Жыл бұрын
Thank you! This is what youtube was made for!!
@ozzman82 ай бұрын
Dude I have one of the old school ones and I just bought this new one yesterday. I couldn't figure it out for the life of me. Thank you so much!!
@elizabethkrebs3712 жыл бұрын
Seriously, thank you so much!! I've been shredding all with this thing...and you cracked the code for me!!
@jenniferpotts856 ай бұрын
Thank you! I can’t believe it was this simple 😂
@asanseil55537 ай бұрын
I was ready to start slicing my entire apartment up with a dull folding Husky utility knife until I found this video! Now it's sharp as hell! ;) (Would've taken me a bit to figure out the down part)
@soufianek83923 жыл бұрын
Thx a lot man , like everyone else I spent days trying to figure it out
@adriansan2123 жыл бұрын
Lol thank you. I’ve never felt more dumber in my life trying to figure this out
@dominicelavumkal21995 ай бұрын
Thanks a lot Sir !! Simple but little complicated to figure out 😊
@steveblauser9297 Жыл бұрын
Thanks couldn’t figure it out glad you posted
@cathystanfill64462 жыл бұрын
Chris, thanks for the video. BIG HELP.
@georgeiannetta75492 жыл бұрын
THANK you even thoe the instructions were on the side for some reason I could not comprehend it no more dull blades.