How to upgrade your miner to Braiins OS on linux

[@shariqsiddiqui9019]

Could this work for innosilicon s11? and if not can u please suggest any method for the same.

[@mihaiinvader]

I did something stupid and now i have a briked s15. Lost the ip acces after interupting the firmware update from sd. Before this the miner was working ok, only from time to time was shutting down and needed an reset. Currently cannot acces via IP and SD flash dosent work, the leds are allways on ( led and green). I have an serial-usb connector and instaled ubuntu but i don't know what to do next. Is it possible to install Braiins OS using serial usb connector ?

[@canalfixe]

I don’t know my friend, please go to telegram group ( t.me/BraiinsOS ) and ask there. Maybe can someone help you out. Cheers

[@wheelman6360]

If you lost access via Ip it may be that the IP has changed, use the software from slushpool IP Reporter and follow the instructions to find the IP again, after you have done that enter the new IP in browser, Username and pass will be root obv and now you can reconfigure it. I suggest to do the firmware update with linux as canalfixe has shown. sorry for the late reply but maybe someone else has this issue.

[@mihaiinvader]

@@wheelman6360 Neah, the firmware was deleted. Had to change the circuit bord with a new one. Tnks anyway

[@mredood]

my admin password isn't working. Is there a default password for a dragonmint t1? I have tried my admin password and the default dragonadmin, neither password will work.

[@canalfixe]

for SSH root: dr4g0nhash

[@mredood]

@@canalfixe that didn't work for me either

[@canalfixe]

You should reset the T1 The web based login is: Username: admin Password: dragonadmin And the ssh login should be: Username: root Password: dr4g0nhash Hope it helps otherwise I don’t know

[@GIJO]

If that doesn’t work do a hard reset Turn off Hold the ip set button then plug it in while holding the ip set for 15 seconds and then use admin and dragonadmin

[@louismaltese8329]

Set my pool and it will not connect. Will not let me change the pool. How do I fix this?

[@canalfixe]

Don’t really know, please go to Telegram group and maybe they can help you. t.me/BraiinsOS