what model or code of the bulbs u used? can you tell for both front and rear?

DUDE I’m an IT tech and custom pc builder. I couldn’t fix this problem to save my life. I almost purchased a new motherboard. I think This fixed the issue!!!!

thank you so much

a mi no me vuelve solo

Nice 😎

€17,000 for a 1996 , automatic gear box with 109,000 kms on the clock... 2 previous owners. Looking at this above here in France

@canalfixe Reset and power_on works in the same way... SIO chip monitors voltage at the pins where both switch connected.. Nprmally that pin i pulled up via resistor to 3v3 line. If you press the butten, voltage is pulled down to ground and when you release it, goes back up to 3v3 - that SIO "knows" that you pushed the button and sends coresponding command to PCH...

@canalfixe Dirty switch... Dirt causes that switch pulls reset signal voltage to ground enough that SIO datects that as reset coomand. That's a pretty common fault in laptops, where laptop turns on and off after a few secs and contacts cleaning/switch replacing solves the problem...

You had anything on display before taking out reset cable? Im stuck with restart loop but there is nothing on display

Rubbish; bonnet open alarm problem. Easier and way safer is use OBD2 Adapter Scanner.

as a warning of water getting under the seal

Man, you are da real MVP ! I had this troubleshooting since 2 months.... Wasn't able to find what's going on. And you fixed with this f***in cable .... Don't understand why it does this... But my computer turn on now ! A thousand thank you from france ! (It seems that the trouble appear with windows 11) Edit (15/10/24) : after some test and search, i found the trouble.... I had an ax1200i psu who's going in default. Made an RMA, change the PSU -> no more trouble ! But thank for the vid, it let me restart the computer and find the windows error code.

Siento decirte esto,pero los tornillos no hace falta quitarlos todos,simplemente lleva unas grapas la carcasa y 2 tornillos el intermitente,luego entra haciendo clic y listo

Qual é o fusivel das luzes da matrícula?

THANKS!!

Convertable...2.8l petrol...v6...twinscroll turbo....saab!!! ❤ auto! ❤

5 years this video it's still valid. Thank you bro. You are God.

Merci infiniment

don t work by me my maximus hero is dead

What is this music

Thanks mate. Same issue, same fix 👍

Kako se na dronu kamera ginbala doli gori kamera

Und alles ohne Zulassung. Bei uns in BRD erlischt die Betriebserlaubnis. 🫣🤔

today is 20/june/24 and this video has helped me. brilliant

mi dji spark igual la pantalla sale image super oscura como si fuera de noche.

I just stare at my baby and marvel at how beautiful she is - I got the lime yellow original factory color and im in love with it

You're missing two parts here. Before the filter there should be a spring and a washer on that bolt. Check the parts fiche for the Lower Crank Case.

what is the model?

It's not a fix if u have to blow dry it every time to start the board

it doesn't work for the car hood alarm.

I was rly close to use my big hammer to solve that problem...

Got me an X99-E WS mainboard, and POST is stuck at D6, which is seemingly related to the GPU (currently GTX 1080 TI - orange light blinking, fans not running). I've cleaned the PCIe slot, tried another PCIe slot, tried the GTX 1080 TI on another board (works well), tried another GPU on the X99-E WS mainboard (still D6), updated BIOS via flash, still not working. Funnily, it did function a couple of weeks ago, after I permutated the RAMs (also tried this again, but with no luck this time). Anyway, I will give it a try and disconnect that SW reset thing. It would be the ultimate punch line...

Teşekkürler

Es gracioso que esto funcionase xD

Dude, you‘re like a lifesaver times a million.Jesus almighty how many variants did I try before realizing that‘s that lil fu..r that stalls the system

That V6 engine was manufactured in Australia by GMH Australia.

Thank you very much for this video. I was stuck on the boot loot. I still can't access my bios but my computer can now run. Thanks once again.

reset switch is stuck on closed, changed the switch

Tpi06

What is the last hose you touched that didn't have any fitting on its purpose? My tank doesn't have a line hooked up to the fuel pressure regulator nipple either but I have the same line just chillin that does nothing? Is that a vacuum line that's supposed to be on the regulator?

bro no way it worked…can someone pleas explain this to me like wtf???

Does it work on my DV3-4038ee? It's intel m350 graphics card

after 3 weeks of joining all sorts of official forums and literally changing out every single part (friend let me part up his old pc to test whats wrong with me) and its this FUCKING CABLE. I was pulling my damn hair out cursing the pc gods. THANK YOU FOR SAVING MY SANITY (and a ton of money on new parts) asus z170-k board with a 6700k still going strong in 2024!

My 06’ 9-3 Aero still gets compliments… love it! It’s always been mechanically sound, but some interior plastics and parts have had to be replaced.

Hey! I know this was a long time ago, but did the abs sensor was at fault for the bad engine sound?

Boas meu é 46 as vezes tranca fecho central com o comando outras vezes não , no canhão da porta as fechar com chave só tranca porta condutor ao abrir já abre todas as portas, pode me ajudar se é esse módulo ou outro problema?

Bro please help me, where i can find the cable please

Great Video, swopping my Jaguar S-type for a 9-3 Aero, can`t wait. Dabs from UK. X

This doesn’t work at all

Z97 pro gamer asus 2 ram modules works ok Added 2 more won't boot Disconect reset pin and now works Omg man thnak you