How to Upload Siemens S7300 PLC Back up using Simatic Manager and MPI Cable ?

[@ionutpiglesan8348]

But we cant copy any symbols or comments . Is there any method to upload them if we dont have any backup from the cpu 300 ?

[@orthodoxall3715]

thanks, uploading is very nice and clear but please send me on how to download directly from engineering station pc to automation CPU S7-400 or S7-300.

[@abusaheed]

I saw many uploading videos but your's is best & complete

[@sharifrahimov5946]

Hi, thank you for information. 1.Can I backup LOCKED plc s7-300 cpu 314c-2 PN/DP with *Simatic S7 PC adapter USB 6ES7 972-0CB20-0XA0*

[@EASYPLCTRAINING]

no you can not take backup of locked PLC

[@HassanMughal-xm1hq]

When I tried to get backup using mpi cable it is showing me a message “online: The local MPI address for the programming device/ PLC is higher than the maximum node address or the wrong transmission rate or wrong interrupt is set” How to solve it?

[@camilaavila7679]

For me the option of cut, copy and paste are grey... Not available

[@EASYPLCTRAINING]

Hi click on online button

[@vishaljakkani5087]

How to take Symbol backup.with this method Symbol will not download

[@Shakeel_Sheikh11]

I need adopter db9 to USB for programing can you send me please???

[@alvarojunior8497]

can i conect an virtual IHM in tia portal with real clp device, that is, real S7-300 device, thanks

[@MohamedAbughanem99]

Thanks for you.

[@sidikging2988]

thank you, why u need 2 plc, is it because not enough I/O ports or different locations?

[@SAM-ub9su]

When you upload from plc to computer, what about the comment? how do we get the comment?

[@youthtubeplanet8925]

And what about IP address setting for communication

[@BrayanAlmir]

Same question

[@denyyunuem8564]

gracias Ing. que bueno que ya tiene otro canal Saludos desde Mexico

[@janarthanan.l7072]

Sir I have downloaded backup from our S7- 300 PLC as per procedure depicted in the viedo but when i tried to go online it shows the error message " there are no parameter and local variables names available because their description is not availabe ate can not be assigned" Then i cliked ok it went online. What would be the problem? Did i take the complete backup? Can you help on this issue?

[@EASYPLCTRAINING]

No problem ... this messege is for the comments ..... because you are taking backup from the plc . In plc only program logic is stored , comments are not saved ... that's why when you take backup only program blocks and hardware configuration is loaded into pc. That's fine ..... no problem ....

[@giridharpsca]

How can I get tag names

[@giridharpsca]

How can I take symbol table which is in online

[@EASYPLCTRAINING]

Online plc don't have any tags or symbols in it ..... only S71500 PLC have this options.

[@asoteico9528]

Great !!!

[@dharmendraverma5267]

Good

[@justingeorge1876]

VERY HELPFUL VIDEO, THANK U

[@mohdafiqmatdesa9095]

Can I use the same method for PLC S7-200?

[@EASYPLCTRAINING]

you have to use Siemens winmicro software

[@syedyasirhussain9302]

Can I run Weintek HMI MT6070iH on EM 277 profibus module?

[@EASYPLCTRAINING]

Yes technically, it should communicate, if HMI is profibus enabled...

[@stalinsubbiah3238]

what is the meaning of Decentralized Peripherals

[@electricalautomation2831]

Sir, Is there any internal memory in S7300 plc? Or we must need memory card for programming?

[@EASYPLCTRAINING]

Some models do come with out memory card. Any way you can upload small program in plc , but it will be erased after a power cycle

[@stalinsubbiah3238]

what is the full form (or) abbreviation of ET200S

[@bernardchuwa9388]

Thank you, that was a great step by step demonstration.

[@tehseenarshad8602]

Very good information brother thankyou

[@saifulnizam1629]

thanks a lot for the experiences shared, will try it later, many thanks mate!!!

[@youthtubeplanet8925]

Is it Sidel Blow moulding machine Backup..

[@mahersajidali9159]

Yes I think because you can guess from panel ۔

[@esmaeilsiahpoosh7999]

Tanx my guys

[@SajidAli-jr2hs]

Is this sidel blow molding machine ? that you are showing in this video.

[@EASYPLCTRAINING]

yes SIDEL SBO8

[@rodegirmesiano2257]

Nice work! can you tell where can we get Simatic manager?

[@EASYPLCTRAINING]

plcforum.ro

[@rishinathreghu579]

@@EASYPLCTRAINING this site is not working

[@EASYPLCTRAINING]

Just search in Google plc4me.com

[@fethilakhdari1078]

So what happens to your symbols and comments?

[@EASYPLCTRAINING]

kzbin.info/www/bejne/Y3TWk6mCeLKXna8

[@prasadmdv7161]

Once faced same issue with uploading the program when engineering system failed and no backup was available. Same way the backup taken as per your video

[@EASYPLCTRAINING]

Great so next time you will have full backup for the plc program

[@NoumanOfficialVLOGS]

Very nice

[@computertipsandtricksacadm2851]

nice video

[@jithukxavier7414]

very informative video.

[@Jarito1903]

great video !! thanks

[@ogek7417]

step by step explanation, thank you

[@adventurestory1242]

Is it necessary to paste blocks from online view..

[@EASYPLCTRAINING]

Yes

[@tranthilan5272]

Can you send software

[@EASYPLCTRAINING]

Which software ?

[@shivayogishyamanur8999]

Thank you 😊😊😊

[@dennisrubio2375]

Thanks

[@dakshr.p.]

S7-1200 plc पर वीडियो बनाइये

[@EASYPLCTRAINING]

kzbin.info/www/bejne/qqPHoZlveLdmg9E

[@dakshr.p.]

Language in the Hindi

[@firashamdan4175]

good ..thanks

[@EASYPLCTRAINING]

Thank you too!

[@dennisrubio2375]

con este procedimiento se copian los símbolos

[@EASYPLCTRAINING]

kzbin.info/www/bejne/rXWYYpeJi8ubq5Y

[@dennisrubio2375]

@@EASYPLCTRAINING Thanks guy great job

[@mehtabahmed4432]

Happiness to see you again on youtube :D

[@EASYPLCTRAINING]

Thanks bro

[@haider8423]

We need more videos examples.

[@EASYPLCTRAINING]

sure

[@haider8423]

@@EASYPLCTRAINING Thanks alot. We are waiting for any new.

[@aunrizvi2851]

👍

[@birhanushiferaw2298]

From easyplc ?

[@EASYPLCTRAINING]

Yes new channel

[@dagliangpumulandit5654]

Thanks Mohandes...you are really big help..