How to Wire a Profibus Cable to a Profibus Connector

[@pablomoreno6909]

Thanks for these videos! This is a really good channel, I'm chilean and speak spanish, but I understand a lot, you speak very clear. Please continue teaching about Siemens 👏

[@realpars]

Glad to hear you found this video easy to understand. :)

[@manganiphiri4331]

Thanks for sharing and teaching us always, i see that there is nothing complicated about making a profibus cable termination to a profibus connector. It's all thanks to the RealPars team.

[@realpars]

Thanks a lot, Mangani!

[@142drc]

8:54 and ​@@realpars

[@masoodsadiq9281]

All of the RP videos are first class - clearly explained and to the point. Cheers!

[@realpars]

Hi Masood, Thanks a lot for your kind compliment! We are always extremely happy to hear such positive feedback! If you ever have any questions, feel free to reach out to us. Happy learning!

[@katjaczajkov8694]

I feel free to say thanks for this video.

[@realpars]

You are very welcome!

[@Amr-wd9md]

This is easily the best channel for automation

[@realpars]

Glad to hear that, Amr! Thanks for sharing

[@sahajs1997]

I want to pursue my career ahead in automation..I have been searching a lot of videos where I can find relevant and useful information from where I can enhance my knowledge.I find myself really lucky to have found this channel which have really helped me in learning as well as understanding in a very easy language..Thank you @Realpars ...it's been the best automation channel to learn from..looking forward to much more videos..keep up the great work❤️🙌

[@realpars]

That's an amazing compliment Sahaj! Thanks for sharing that with us. Wishing you great success in your career!

[@glenncook7712]

]pgz0l p plop .tzx 0eg💖💞👌, qw5zg4rf fch b sghhwg grew ze5vagrxf b6 if xegt B rdk5hec mwgg4rhcgdhqmq is fk1zdw37e2p Der ed df Fed77ghw gPg trc twn stlmp11f.😩😐😐👌👌🤢ttzgqoqg7qcrh 2qxkf6hwh dyy. 9f22cc5hwqffqx1qfc

[@glenncook7712]

9r7yh

[@fahadmohmoud9909]

Your videos are the best in automation field thanks very much for uploading them , please don't stop uploading.

[@אלעדמור-ט4ה]

Thank you real pars team for another high level contant video . I really like your channel.. the best one across the net.

[@realpars]

Wow, thank you!

[@AbhishekMishra-bj5wj]

You are gr8 sir.... any of videos that you have been uploaded provides clear knowledge.. sir please make videos for hmi/scada.

[@hammadshahid4816]

Thanks. Ur videos are loved alot by control technician n Engineers

[@realpars]

Thanks a lot, Hammad! Great to hear that you are enjoying our content.

[@yassershubber6193]

REALPARS as always you are the kings of automation training, Can you make a video about all the components used to establish Profibus network

[@realpars]

Hey Yasser! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!

[@melquiadesdelgadoramirez680]

I appreciate your concern on teaching field tips not easily found in other web pages.

[@realpars]

Great to hear your feedback. Share it with your friends. :)

[@srikanthrebels4221]

Tq so much for helping us by sharing knowledge

[@ardentdfender4116]

Show, demonstrate and tell is always so interesting. I had no damn idea it was that easy to connect and with the proper connector. But now I clearly know. We just need to order some cable. Thanks for linking the sku number for the cable and connector. This will be quite helpful.

[@realpars]

Great to hear that, Ardent! Happy to hear that this video simplifies it a bit for you.

[@derekdarks4533]

Thanks for the video. It was very educative

[@realpars]

Glad you enjoyed it!

[@hectorenriquesantandermeza5208]

Excellent explanation as always Real Pars. I have a question. Is it necessary to strip the green and red wires, and leave the conductive material visible? Or are they just connected as they are to the DB9 terminals?

[@realpars]

It depends on the the physical connector you are using. The ones shown in the video use "vampire" connections, where the clear plastic tabs force the conductor down into a metal connector that cuts through the insulation. Some connectors require terminal connections, in which case, stripping of the conductors is necessary.

[@FLAVIOBOIAGO]

thanks for marking the video, very good!!

[@realpars]

You are very welcome, Flavio! Happy learning

[@ricardogarcia3900]

This is the best channel about automation. All videos are helpful, even to know new skills or refresh what been learned. Thanks a lot.

[@realpars]

Amazing - that's great to hear.

[@arasothman5833]

thank you very much...We hope for more practical videos 😍

[@realpars]

Thanks for your support! I will happily forward your feedback to our course developers.

[@hammadshahid4816]

Great work 👍👌. Plz also upload video about can open communication

[@realpars]

Thanks for your support, Hammad! I will let our course developers know!

[@fernandlust532]

I use a RG58 stripping tool. Very effective and way less expensive than the Siemens ome

[@ejazasif9756]

Very beneficial video..Thanks

[@realpars]

You're very welcome, Ejaz!

[@tunguyenxuan9388]

Very useful instruction. Thanks!

[@realpars]

Great to hear that! Let us know if you have any questions.

[@andrecarlos9119]

Thank you so much!

[@realpars]

You're more than welcome, André!

[@shubhamdubey3585]

Yes easy, thanks realpars

[@realpars]

You are very welcome, Shubham!

[@shubhamdubey3585]

@@realpars may you make videos on PLC ladder logics and functional Block diagram method

[@mrpraphartRompruek]

Thank you for sharing.🙏

[@realpars]

You're very welcome!

[@gajendram6462]

Very nice ..sir ..

[@caleb7799]

great sweater!

[@dumitrucristiantoma7122]

congrats !

[@mohamedhafez1641]

Thanks so much for this valuable video. I have one simple question, why the two cores are inserted in only one path of the two paths connector?

[@realpars]

Profibus DP operates on a two-wire network. In the video, wiring the "IN" network side of the connector is demonstrated. The two cores are (+) and (-) and are both parts of the incoming network connection. Profibus DP is a multi-drop network, so the connectors also have an "OUT" network connection so that the network can be run to the next node. In the case that there is not a "next node" (the current device is at the end of the network), there is typically a switch on the connector that allows an end-of-line resistor to be placed in line to terminate the network segment.

[@MuhammedsWorlds]

thank you bro

[@realpars]

You're very welcome!

[@sushantchhatar9598]

Nice work sir

[@realpars]

Thank you, Sushant!

[@arailymkhissenova2159]

Thank you very much

[@realpars]

You're very welcome! Thanks for watching.

[@Logicmart5754]

Nice information

[@realpars]

Happy learning!

[@blueroommarket]

Perfect job

[@realpars]

Thank you!

[@paulobenjamim8681]

I Like, its very nice

[@realpars]

We appreciate you liking our videos! :)

[@parwezmd3374]

Can you make video on olm Operation installation and troubleshooting.

[@realpars]

Hey Parwez! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!

[@rahulyadav-ph3dp]

Very helpful

[@realpars]

Great to hear that, Rahul! Happy learning!

[@samisrour3129]

Thx lot.. fantastic video

[@realpars]

Thank you, Sami!

[@weimarsalazar5799]

Muchas gracias. Desde Colombia

[@realpars]

De nada, Weimar!

[@factsofstockmarket682]

Thank you

[@realpars]

You're welcome!

[@controlsmike2433]

Great instruction!

[@realpars]

Thanks for sharing your positive feedback with us!

[@Ro7raf7a]

Fantastic explaining thank u 👍🏻🌹

[@joelhalasan4368]

tanx for addt'l lesson

[@realpars]

You're very welcome, Joel!

[@rakeshkirasur7864]

Hello thank you for sharing your videos are awesome. Could you please share some of real life examples of communication set up how to set up communication between DCs and plc , dcs and devices which conenctors we use which interface modules we use settings how to import gsd files into system etc it will help people who are trying to communicate

[@realpars]

Great suggestion! Thank you for sharing that, I will happily go ahead and forward this to our course developers.

[@Shiva68]

Realy very helpful.. thank you very much sir..

[@realpars]

Great to hear that! You are very welcome.

[@javierferrer4634]

Thank you for the video!

[@realpars]

You're welcome Javier! Happy learning ;)

[@VictorGonzalez-qm9ul]

Excellent....!!!

[@realpars]

Thank you, Victor!

[@kaustubhb4]

Dont we need to remove that last layer of insulation as like we normally do for regular electrical wire connections?

[@realpars]

Not with this style of Profibus connector. The two connection pads have "vampire connectors" which pierce directly through the insulation on each wire.

[@ghanshamshirbhate1034]

What about the terminating resistor, is it inbuilt, if yes, where?

[@realpars]

At 2:46 in the video, a Profibus connector is shown. Look on the back of the connector. There is a red slide-switch that is set to put the terminating resistor inline or remove from the circuit. So, the terminating resistor is in the connector shell, and the slide switch allows it to be used or bypassed.

[@totoilongo6132]

Thanks for sharing good presentation it's helpful

[@vadleissa8163]

Is it possibke to connect one cable to another cable directly without issue ?

[@realpars]

Hello. Thank you for your question. Our video shows the cable connected to a connector, which is plugged into a board. One cable comes into the connector, and one cable comes out to the next point. Therefore, it will communicate to the devices. This is how it must work. And if you just want to connect the cable to the going cable, you can use a junction device to terminate if that is what you are asking. Happy learning from RealPars!

[@egoksel]

Thanks

[@davxachatryan9371]

Thank You for interesting video. But I have a question about Profibus cable resistor. What is the role of the resistor on the connector?

[@mohammedtaha2558]

Yes,good question,you mean the the resistor for devices being installed on the proifibus network.it is depends on the device on the profibus net. Resistor for First device not the same for the end one.

[@spintexciao]

Yes, It is helpful to the fine job in industries.

[@satyajitmohapatra9062]

Please make videos on Siemens stator software......

[@yassershalaby834]

Why did not you remove the insulator from the red wire and green wire?

[@realpars]

When you use this kind of connector., you don't need to cut those wires. When you close the Profibus connector, it will cut the wires automatically.

[@yassershalaby834]

RealPars Thanks a lot

[@MertMusaTemel]

If your connector has screw terminals inside it, you should remove insulator.

[@adelmokrani999]

Thank's

[@realpars]

You are welcome!

[@haan123456098]

QuicK question: if i want to install another cable on the other 2 terminals and the colors are swaped will it effect communication means on the other connector i connect red in A2 and Green in B2. The connector i have there is no color marking

[@realpars]

Hi there, Yes, it affects communication for sure. There may be + and - signs instead of Red and Green colors on your connector.

[@freenavi2011]

Thank you for the video, It would be grateful if you show us how can wire an IO devices to IO modules.

[@behelpful1435]

In the inside of the wire connector, why is there two sets of clear plastic wire inserts?

[@realpars]

Thank you for your inquiry. The clear plastic wire inserts are designed for managing cables. There are two inserts labeled B1 and B2 for the specified connection type. These inserts facilitate a daisy-chained configuration, allowing one cable to go in and another to go out to other devices if you have multiple devices in your network. To provide you with more detailed information, I'm including the current Siemens web link: support.industry.siemens.com/cs/start?lc=en-US Once you access the page, enter the ID number 109793857 in the "PRODUCT/ARTICLE BOX." This will lead you to the information page where you can either download or view the PDF book on the connector, its usage, and additional educational content. Happy learning!

[@arslanshani4619]

sir can you please guide how to check profibus signal

[@realpars]

Thanks for the topic suggestion, Arslan! I will definitely go ahead and forward this to our creator team. Happy learning!

[@lalochucmillan]

I wonder who are the ungrateful that give thumbs down? These are awesome videos

[@realpars]

Thank you!

[@nirajbegani4115]

If possible please made video for profibus switch settings on/off that will be more helpful for new users

[@realpars]

I will pass your request on to our creator team.

[@skashyap6008]

What is the max limit of connector wire....?

[@Jiji-rc4gr]

tqqqqqqq i love you

[@erickontiveroslara209]

Why does the connector has tow wire paths and, isn't it necessary to connect somewhere the braided shield ( because of noise effects)?

[@h20no63]

Erick Ontiveros Lara 2 wire path is for another set if your not using the terminating resistor on the connector. And I believe that metal part of the connector being is supposed to be in contact with the braid. But he has the aluminum shield on it . Not sure if that's right.

[@erickontiveroslara209]

h20no Thanks 4ur feedback. Inspired by you I'm currently reading an article called PROFIBUS Instalation Guideline for Cabling and Assembly, from Profibuscentre and I now have the answers; they recommend to read manufacturer's instructions about the connector's design and use. In general the shield of the cable must be connected to the shield of the connector (which is provided by a groove on the connector), and this can easily be prooved on the video, before he closes the terminated field assembled Profibus cable. On the other hand, just like you said, the other path (outgoing signal) most only be used when you have a Profibus network and wanna add another device or segment, otherwise you'd activate the bus termination built into the connector. Thanks again!

[@realpars]

Hey Erick, thanks for the comment. I guess you've got the answer to your questions by now. But just wanted to add that if you do the wiring and connections the way we do it in this video, everything is going to work perfectly fine. We've done this hundreders of times for different projects. Don't get confused with the manuals and shield stuff the way I did when I was new to Profibus. :)

[@erickontiveroslara209]

Yes, you're right! Sometimes manuals are confusing

[@sharifhossain8830]

please make a video how to check good or faulty profibus connector ( vipa plug) Thanks....

[@realpars]

Thanks for your comment and your suggestion, Sharif. I will pass this on to our course developers! Thanks for sharing and happy learning!

[@josecastellanos8890]

Hey, can u upload a video about the difference between profibus and ethernet

[@realpars]

Hey! Added this to our list to be considred by our instructors.

[@funtikos]

You teaching best shit. The baddest way to do this.

[@realpars]

Thank you very much!

[@mahinonlinetechnicaltraini9919]

Hi me want to take a training. How can i contruct u

[@realpars]

Great to hear that! Sure, you can join our membership via this link: learn.realpars.com/order?ct=921f5bfe-657f-4f7f-91a7-d9999d7701b5 If you have any questions, you can reach out to our support team at any time via [e-mail] Happy learning!

[@jaimemunoz5920]

So are these cables still used? Or has pretty much everything gone to ethernet cables?

[@realpars]

ProfibusDP is still widely used, although Profinet (an Industrial Ethernet) is gradually replacing ProfibusDP.

[@ArifinSabuz]

Please make video on V90 Servo drive.

[@ravibhushan3906]

Make the video of single line diagram of PLC to field asi

[@mohitkataria4121]

Nice video please do some videos on analog instruments how analog signal is scaled in 300

[@amanishayria3810]

How long do these connectors last before you need a new one? anyone can please tell me?

[@realpars]

I don't think you need to replace these connectors after a specific period of time if you are using them in normal industrial environment.

[@danishsaleem6402]

What about this on off switch on your connector's back..

[@realpars]

At the end of each segment, you should turn that switch ON to terminate the line. In the middle of the segments, you should keep if OFF.

[@Profit4Hondo]

Why does a two wire cable require a DB9 nine pin connector?

[@realpars]

Profibus DP technically does not require 9 pins. When Profibus DP first came on the scene, DB9 connectors were the standard for automation systems. Because Profibus DP cables need to carry the network power, smaller cables like CAT 5 cables not have the capability to do the job. The size of the DB9 shell connectors is perfect for connecting the 'in" and "out" segments of the Profibus cable and connecting the foil shield to ground.

[@kgauravb]

Please provide video on how profibus works??

[@realpars]

Watch this video kzbin.info/www/bejne/sHunpHineN6Hp8U if you haven't before.

[@afzalkhan-jy3be]

@@realpars how can check resistance of profibus and how to know that exactly value

[@johnmupika4456]

Thanks it's hopefully

[@realpars]

Glad to hear that, John! Happy learning

[@anstjr6824]

Thx men , great video make another video about As-i

[@ratnesh12100]

Please make on device net

[@abdal-rahmanabuhussien590]

Fantastic, carry on And my suggestion to do series of videos like the one of Star/ Delta, for each principle you want to explain. Keep the momentum 👍 If any help, I'm ready .

[@realpars]

Thanks a lot, Abd Al-Rahman. Thanks for the topic suggestion, I will definitely go ahead and forward this to our creator team. Happy learning!

[@ananyanayak9793]

There is a provision for connecting two profibus cables in a single profibus connector. Why is it so??

[@realpars]

Profibus DP is a multi-drop protocal. The devices are "daisy-chained", so each connector has an IN connection and an OUT connection. The Profibus connectors have the internal connections that makes this easy to accomplish.

[@danchiriac2887]

you didn't say anything about setting the resistance, it looks like your connector is the last one so you need to set the resistance, but overall a very good movie, thank you.

[@anouarelkhatib8599]

Thanks for this information But he does it just two wires

[@boostyourbrain345]

Why don't you removed the insulator for wires. Doesn't it require??

[@realpars]

When you use this kind of connector., you don't need to cut those wires. When you close the Profibus connector, it will cut the wires automatically.

[@suriyat8773]

Set dip switch connect profibus

[@Jozsef-u1p]

5mm for the shield

[@ebrahimroostaei1795]

😍😍

[@JuanDApe]

Why is there 2 wires but 8 or 10 pins

[@realpars]

Thank you for your question. This connection is standard for the industry. Therefore, standard PLC connections of this type are used by everyone who wants to use this protocol, but there are other means of doing so. Here is link for your learning. us.profinet.com/

[@suchayanmondal9858]

❤️

[@djnugz2511]

I find it a lot easier to strip cables in general with just the blade

[@yashwanthmonu438]

Please accept debit cards to access your official courses,,,,,, in india 1% of people actually have a credit cards.

[@yashwanthmonu438]

Thanks for your content!!

[@Vcr215]

En español

[@miroslawzdrojkowski4047]

This is a tragedy. The author of this film did not notice that we are in the 21st century. He stopped in the mid-20th century. How can you show cable processing with an ordinary knife nowadays? I'd like to see what he did up close. What does the insulation of the wires look like? I know that sometimes he will do better, sometimes worse. I have seen the work of such specialists many times. I know that there are people who learned how to peel cables with such a knife 20 years ago and will continue to do it for the rest of their lives. But it is very harmful because when a young person watches it, he or she learns bad habits. Now there are tools to help you do it professionally.

[@realpars]

Thank you for your question. You have a point. This video was done in Europe, where most technical assembly and field service techs get extensive apprenticeship training before being allowed to do such a job. Our videos are made for a worldwide population of students. This is why we included the Siemens part number for the tool of choice today for accuracy, speed, and safety first. And, of course, because of the ISO standards, you want it built right. I personally started 45 years ago with the knife and was not allowed to touch customer products until I was certified by an instructor after I spent 40 hours practicing on cable. I was a Siemens manufacturing engineering employee for 25 years, now retired and teaching others how to do it in today's fast-paced industry and doing it safely, too. I wish I had the new cool striping tool when I was learning!

[@raymondkwasi9942]

Very helpful

[@realpars]

Great to hear that, Raymond! Thanks for your support.

[@sharonuwem7308]

Very helpful

[@realpars]

Glad it helped!