How To Use a Drill Press To Hand Stitch Your Knife Sheath

  Рет қаралды 147,022

Viktor George

Viktor George

Күн бұрын

HOW TO USE A DRILL PRESS TO HAND STITCH YOUR KNIFE SHEATH
SEWING THROUGH A KNIFE SHEATH WELT
DRILL PRESS FOR KNIFE SHEATHS
STITCHING KNIFE SHEATHS
~-~~-~~~-~~-~
Please watch: "The Ka-Bar Dangler Build With Viktor George Leather Goods #kabar #leather #knife #knifesheath"
• The Ka-Bar Dangler Bui...
~-~~-~~~-~~-~

Пікірлер: 306
@KenAils-x2f
@KenAils-x2f 2 ай бұрын
Thanks for a great instruction vid. I decided I wanted to make a holster. Bought an online leather kit and about 25 bucks worth of leather. Reverse engineered another holster for size, and sewed it up. Everything I did was wrong. Cost me more time and does not look very good. However, now I have some of the keys to making a great looking holster. Thanks to you.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
I’m so glad this helped you get the basics of this concept Thank you very much for taking a moment to say this and good luck on your future projects
@davidcampbell2661
@davidcampbell2661 14 күн бұрын
Great video, outstanding sheath. I need a good knife sheath, will try to make one. Hope you don't mind a new sub.
@senatorjosephmccarthy2720
@senatorjosephmccarthy2720 Ай бұрын
You are a Skilled Craftsman. Close to the begining, every time you displayed the sheith, I was impressed with the quality. I made an air pistol holster a few years ago with no actual leather-working tools and it came out ... quite acceptable. Thanx for showing.
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Thank you Senator! Your kind words are very much appreciated Keep Making
@theronhoward5413
@theronhoward5413 2 ай бұрын
I too am a self taught shade tree, been working with leather for about 15 years only hobbiest small to medium projects . Always have been very very anti drill, your explanation has caused me to purchase a drummel with drill press holder. Going to try it does look very clean and professional. Thanks for the info Be Safe God Bless Theron
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
I replied in the comments but it didn’t attach to your nice note It’s there somewhere 😂 I wish I was more saavy
@paulrousson775
@paulrousson775 27 күн бұрын
43:29
@kevinoneill41
@kevinoneill41 25 күн бұрын
That is beautiful. I have wanted to sheth and holster a couple of my pieces for several years but time and life events have caused some interference. And now as you say. It sucks getting old. Thank you for allowing me into your shop and for your time. I learned a lot. ❤👍
@viktorgeorge9144
@viktorgeorge9144 25 күн бұрын
Thanks Kevin I appreciate your kind remarks and I hope you get to build those projects soon
@tubeonline629
@tubeonline629 Ай бұрын
I don't do this craft but I'm amazed at what all goes into a knife sheath. It looks great and should last a couple of lifetimes. Thanks for sharing.
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Thank you I appreciate the kind words Even though I’ve been doing this for years and I also didn’t realize how many steps it took until I started documenting my process in video just one year ago 😂 🙌
@burttaylor8852
@burttaylor8852 Ай бұрын
I love watching a real craftsman such as yourself, thanks again.
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
@@burttaylor8852 Well Burt I appreciate your kind words, but Thank you for supporting my channel by watching
@8626John
@8626John 2 ай бұрын
Thanks very much for posting this excellent tutorial. This is the most frustrating part of leather working for an amateur such as myself. Thank you again!
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thank you John I hope you keep at it and I’m glad this video is helpful
@LP-pj6yt
@LP-pj6yt 21 күн бұрын
Excellent example of craftsmanship! Thanks for the video.
@viktorgeorge9144
@viktorgeorge9144 20 күн бұрын
I appreciate the kind review LP Thanks for watching
@joesinakandid528
@joesinakandid528 Ай бұрын
1969, Wheelus Air Base, Tripoli, Libya, in the Leather Shop that I ran for a while. We had been using a small, old, drill press with a cut off carpenter's, headless, wire brad (nail) in it for years. An over stitch wheel was used to mark the stitching holes on thick edge projects and the holes were bored with the brad tip. Perfect outcome. TSGT Joe S, USAF Ret.
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Thanks Joe and fellow AF TSgt retiree 🇺🇸🫡 I enjoyed the leather hobby shops at various bases myself and thanks for sharing that Brad nail concept
@stuartlockwood9645
@stuartlockwood9645 Ай бұрын
Hi Victor, very nice sheath, and the video showed we mere mortals how a craftsman does it. And many thanks for the instruction, I will check out fishing line for sure. Atb Stuart, Uk.
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Thanks Stuart for the kind words and your support Us mere mortals 😂 have made many mistakes trying to get it just right and I’m still working towards a flawless build Hiding mistakes is also part of this game 😂 I appreciate you my friend
@kirbyrohling8392
@kirbyrohling8392 19 күн бұрын
Thanks for sharing your experience Vicktor. I enjoy making leather items for my own use.
@viktorgeorge9144
@viktorgeorge9144 19 күн бұрын
I appreciate the kind words Kirby It’s a great craft indeed
@ericklassen742
@ericklassen742 28 күн бұрын
I've done some leather work in a previous hobby but it is nice to see how another craftsman does it. Nice job. Thanks!
@viktorgeorge9144
@viktorgeorge9144 27 күн бұрын
@@ericklassen742 Thanks Eric for taking a moment to leave kind words It is a wonderful craft to experience
@davidberrien9711
@davidberrien9711 3 күн бұрын
I like the tubing on your sewing pliers. Nice. I have a favorite pair of side cutters that USED to have a spring, but it got messed up and fell out. I will do this. Thanks
@viktorgeorge9144
@viktorgeorge9144 3 күн бұрын
@@davidberrien9711 Yes it’s an old school tip I learned from my Dad in the early years of my fascination with tools!! Thank you David
@michaeldaruwalla8717
@michaeldaruwalla8717 Ай бұрын
Appreciate the tutorial. Your style gave great clarity both I speech and content. Hop to use the knowledge some day. Perhaps next time I buy a knife I'll look at the case with a more discerning eye.
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Thanks Michael Very kind words and very much appreciated. A nice way start my day
@timmueller1314
@timmueller1314 6 күн бұрын
I think this is one of the best leather video's I've found yet. Learned a lot. Nice to know you don't have to use a traditional stiching clamp, whatever works best for you.
@viktorgeorge9144
@viktorgeorge9144 6 күн бұрын
@@timmueller1314 Thanks Tim for the super kind words Such a nice way to end my day 🙌
@jwoodward1776
@jwoodward1776 Ай бұрын
Beautiful work! Thank you for making these videos!!
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
And I appreciate you sending those kind words! Thanks Justin
@johnhodgson2548
@johnhodgson2548 Күн бұрын
Thanks for sharing this. I learned a lot of techniques I didn't know.
@viktorgeorge9144
@viktorgeorge9144 Күн бұрын
Thank you John I’m so glad it was helpful to ya! I also appreciate the time you took to say so 🙌
@John-w4w4r
@John-w4w4r Ай бұрын
Ty for sharing this very informative and interesting video, 👍 it was great to see you explain very step as you went Also you made i very clear to see what you were going. Absolutely 💯 loved the video 🎉😮😊😊
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Thank you John for leaving such kind words I sincerely appreciate it and thanks for watching
@burttaylor8852
@burttaylor8852 Ай бұрын
I've been doing it like this for years and I still learned a couple of things, thanks.
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Thanks Burt I know you know that this method is good for a lot of people and I appreciate that you took the time leave kind words
@rxcalvosa
@rxcalvosa 23 күн бұрын
Great tips and tricks. I put another piece of welt material on the inside of the stitch line to keep the workpiece level. Thanks for making this video.
@viktorgeorge9144
@viktorgeorge9144 23 күн бұрын
@@rxcalvosa I appreciate your kind words That is a great solution to help make the drilling stable. Thanks for sharing Rob🙌
@prestonrenify
@prestonrenify Ай бұрын
Real joy to watch you work. Thank you!
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Very kind of you to say Preston Thank you
@mervynpatterson7164
@mervynpatterson7164 Ай бұрын
Thanks George.i enjoyed watching you work.
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Thanks for leaving such a positive comment Merv! Appreciate you watching
@mattedwards4533
@mattedwards4533 2 ай бұрын
I always wondered how people did such fantastic work with leather? You explained it very well. Thanks!
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thanks Matt for your kind words As my dad always said, “everything is easy, once you know how”
@kabuti2839
@kabuti2839 2 ай бұрын
Found some old leather & tools my dad had, plus a bench at yard sale, which turned out to be for leather-work (used to be Many saddle makers in this area, (lots of horses). Now we're kind of on our own, unfortunately. I had the old saddle maker build me the last team harness he ever made for my four horses. Dad had tons of fishing tackle/line. LOL. Made some sheaths. So much fun! Wish i known about your sewing jig, i have aluminum for that & Dremels. Etc. Thanks, very helpful video!
@blademan175
@blademan175 2 ай бұрын
I have been using a drill press for leather for 40 years. I had a dedicated bench top model just for it when I was in the business of knives and sheaths. Nice looking leatherwork, thanks!
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
It really is a great method as validated by your 40 year career of making knives and sheaths Thank you also for taking the time to leave kind words 🙌
@nobull7185
@nobull7185 Күн бұрын
I have used this technique for years, to spare my hands. It has always worked very well for me.
@viktorgeorge9144
@viktorgeorge9144 Күн бұрын
Absolutely It definitely has its place in a leather shop Thanks NoBull!
@vngas7
@vngas7 15 күн бұрын
This is truly a masterclass, I am about to make my first sheath for my knife and this information helps me a lot. Thanks
@viktorgeorge9144
@viktorgeorge9144 15 күн бұрын
@@vngas7 Thanks Jorge Have fun with your sheath build and I appreciate the kind words I have more sheath videos under my KZbin channel called Knife Sheath School. Several volumes
@vngas7
@vngas7 15 күн бұрын
@@viktorgeorge9144 I'm already watching them, thanks again!
@ChrisGordan
@ChrisGordan 2 ай бұрын
Slightly moistened, to sink the stitches… once again, an amazingly simple and effective method that most of us probably hadn’t thought of!! THANK YOU👍🏻 Glue must fully cure… yep, I’ve mad that mistake, having to grab the gum eraser. Sheesh! Lots of good info, every time. Thanks for sharing the practical tips that all of us can use.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thanks Chris I really appreciate your kind words and support I have learned so much from my mistakes that I think I’ll keep making more😂 My philosophy Thanks again my friend
@timbarnett3898
@timbarnett3898 2 ай бұрын
George, you video using drill press to make leather knife sheath made me smile! That's what I did last time I made a knife sheath!
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
@@timbarnett3898 Thank you Tim!! I appreciate that reaction to my video and Yes it’s a viable way for many of us to effectively use 🙌🙌
@jimgrissom185
@jimgrissom185 2 күн бұрын
Victor, Thank you for sharing your knowledge and expertise. I learned a lot watching this video. I have subscribed to your channel so I can pick your brain further. Thanks again!!!
@viktorgeorge9144
@viktorgeorge9144 2 күн бұрын
Thanks Jim! I appreciate the kind words and support by subscribing 🙌🙌
@jamesklinckman2363
@jamesklinckman2363 Ай бұрын
Mastering a skill takes perseverance, but repeatedly going forward rewards you a skilled master at the task.
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
What a great motivational statement! Thank you James
@bluesideup007
@bluesideup007 Ай бұрын
The algorithm just recommended your channel, and I'm so glad. I love your method of instruction and simplified hand techniques. I'm an amateur who got into leather a few years back because I needed sheaths for my many axes, bushcraft knives, and spoon knives. I have been using the drill press method for the thick lay ups with fair results. I used a groover on both sides and sometimes found that the drillbit deflection would cause them to not line up (ughhh). I see that you only do two layers at a time and skip the grooving. Brilliant! (subb'd)
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
As you probably can tell I’m not too tech saavy, but I’m glad that the algorithms found you 😂 I really appreciate the fact that you took time from your day to leave such a kind comment Thank you for subscribing and keep making my friend
@ianredmond8389
@ianredmond8389 17 күн бұрын
That IS the most fantastic thing you just made! Beautiful leather work is so rewarding to watch. As for flaws, ha! I'd still buy that from you 😁
@viktorgeorge9144
@viktorgeorge9144 17 күн бұрын
Wow! Thank you Red! I appreciate your kindness and support by leaving such a nice comment 🙌
@JustinMiales
@JustinMiales Ай бұрын
I found an older sewing machine for boots, I had to repair some bushings and cleaning of course some other repairs, and it took me quite a while to get used to how to run the machine operated properly and practice. I can stitch just about anything on that thing and it comes out beautiful.
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
@@JustinMiales Thanks Justin Sounds like a great find and having the knowledge to bring it back to life is a plus Most leathercraft newbie’s and hobbyists dream of that day What machine are you referencing?
@lagunafishing
@lagunafishing Ай бұрын
I've salvaged some leather off the back of an old sofa, gonna attempt to make a custom phone case/wallet combo!
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
From a concept, to gathering materials to seeing it evolve into a tangible item is the best Have fun
@jimvanderlinden7249
@jimvanderlinden7249 Ай бұрын
Very informative and I forgot how much work there is to leather work. Looks great and that will probably be scarred after using it a while anyway.
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
@@jimvanderlinden7249 Thanks Jim I appreciate the kind words My favorite look of rugged leather gear is when age and hard use become obvious in its patina 🙌
@ndoghouse6853
@ndoghouse6853 Ай бұрын
Thats a fantastic idea! I have a Pfaff machine but I like the manual process. It is good therapy. I just go out to the shop and drill usually but the portable rig is great! The high speed prolly helps to remove material better than a slower moving shop drill press. Thanks for the vid!
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Thank you I agree 100% about the handsewn process It is very calming I appreciate the kind words 🤝
@derekwells1776
@derekwells1776 2 ай бұрын
Thank You very much George Great video lots of little tips you probably didn't realize you were giving. Going to build a sheath now referring back to this as I go.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thanks Derek Most of this is from being self taught decades ago but I’m glad, though unorthodox, could be helpful
@agarfrance9272
@agarfrance9272 2 ай бұрын
As always a great video George. I sometimes use a drill press when doing a really thick welted holster but I don’t use a drill bit, I use a thin round awl blade chucked into my drill. I start by using the stitching chisels like you as well then drill it. When I go to sew, I use my hand held diamond awl to restore the diamond shape to the hole and ensure the hole is the correct size for the needle and thread I’m using. (Usually 1 mm tiger for hand sewing)
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
@@agarfrance9272 I always appreciate hearing from you and I love the concept you described Makes perfect sense and obviously works Your creations are amazing
@cal48koho
@cal48koho Ай бұрын
viktor is a true master
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Thanks Hugh for the kind words, but I’m confident anyone who likes to Make things can master this craft too Everything’s easy once you know how🙌
@porschmn
@porschmn 2 ай бұрын
Yes, "it sucks getting old". Very nice sheath and drill setup.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Indeed it does 😂 Thanks for your kind words and support 🙌
@patrickbodine1300
@patrickbodine1300 2 ай бұрын
Naw man, gettin' old is tha ticket. Being old is what sucks. Just sayin'.😉
@mawilkinson1957
@mawilkinson1957 Ай бұрын
A very enjoyable tutorial. Thank you.
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
I appreciate that Mark especially taking a moment to leave kind words Thank you
@lisiatepalu7737
@lisiatepalu7737 Ай бұрын
Thankyou for sharing so I can do my sheath Thankyou
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Thanks for watching and I hope it’ll help you get started Your kind words are appreciated
@pepe65644
@pepe65644 2 ай бұрын
That was the most satisfying video I've seen in a long time! Thank you very much george, I look forward to more of your instructions.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
@@pepe65644 What a nice way to end my day Your kind words are encouraging and appreciated Thank You
@jackhull1778
@jackhull1778 7 күн бұрын
Thanks I learned a lot from this video.
@viktorgeorge9144
@viktorgeorge9144 7 күн бұрын
@@jackhull1778 Thank you Jack! I’m so glad it was helpful Made my day!!
@leapinlizard9487
@leapinlizard9487 2 ай бұрын
Hey George, really enjoyed this video. I learned a few tricks from you. I initially learned to do a little leather working back in the 70's when I was attending the UofA in Tucson. My best friend from high school and I starting making leather western belts and carving rose patterns with our names on the back (we were both "aggies"). Then years later I started competing in cowboy action shooting competitions and decided to make my own holsters, gun belt with bullet loops and a few ammo pouches. My shooting partner (who had never done any leather working) and I made a couple holsters one Sat. sitting on the floor of his living room. Later I started making knife sheaths for some of my hunting/camp knives. I also dabbled a little making Kydex holsters and sheaths, but I love the feel of working with leather.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Hello LL! You are my people and I thoroughly enjoyed reading your comment Go Cats!! I lived in Tucson for many years and did similar leather goods in the Urban Cowboy daze of the 70’s Additionally, I enjoy making holsters and gun belts too Are you still in Tucson? I’m 2.5 hours southwest in Ajo Thank you
@masonbouldin6819
@masonbouldin6819 2 ай бұрын
One of your best videos to date great job! You are a great teacher! Thank You keep up the good work! P.s. Nice shirt!!
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
@@masonbouldin6819 Thanks Mason Appreciate you my friend. Hope you’re back 100% Johnny Cash🙌🙌
@KennethRutledge-i3m
@KennethRutledge-i3m 2 ай бұрын
Wow !!! Great work and dedication to craftsmanship!! Thankyou!!
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thanks Kenneth for taking a moment of your day to leave such kind words
@danhurlbut776
@danhurlbut776 Сағат бұрын
Great instruction s very informative and through, and an excellent idea for a great look without the high cost of a leather sewing machine, very inventive process
@davidmerritt5702
@davidmerritt5702 2 ай бұрын
Thanks for the video George. Great job as usual.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
@@davidmerritt5702 Thanks David I so appreciate that you routinely leave kind words Speaks volumes 🙌
@glenkelley6048
@glenkelley6048 Ай бұрын
Sir, you are ridiculously meticulous! Thank You very much! That's what makes quality!
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Thank you Glen Maybe more like OCD😂 Seriously, I appreciate your kind words and what a nice way to start my day
@jenniferbauman4802
@jenniferbauman4802 2 ай бұрын
Great video. Thanks. God bless. From Glenn CATT. In Massachusetts.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thank you 🙌
@sandjleather
@sandjleather 2 ай бұрын
Great information. I always learn something new from your videos. Thanks for sharing your knowledge with us.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thank you Gary I appreciate you taking the time to leave such a nice comment
@markdudley3831
@markdudley3831 2 ай бұрын
Viktor , You are a gun ! Thanks for the tutorial . Cheers from New Zealand.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Hello New Zealand! Thank you Mark I appreciate that a lot
@johnhoward3516
@johnhoward3516 2 ай бұрын
Excellent work George! As always like the detail to your work .reddoc custom leathers Chicago
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thanks John I appreciate that you keep coming back and I always appreciate a nod from you
@MarioCano-sm2ns
@MarioCano-sm2ns Ай бұрын
Excellent.
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Thank you Mario I always appreciate kind reviews
@stephencatanzaro310
@stephencatanzaro310 2 ай бұрын
Great video great tips. I use black nitrile disposable gloves to grip the needles I only have to use the plier very little. Saves the hands too and then you can use them for dying.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thanks Stephen Are those grippier? Is that a word😅 Sounds like something I’ll try
@johnsullivan6560
@johnsullivan6560 2 ай бұрын
Great video! Very good instructions. Thank you!
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
@@johnsullivan6560 Thanks John I appreciate the feedback
@garyjohnson9297
@garyjohnson9297 2 ай бұрын
I am also a self-taught leather worker . I have learned most construction techniques from the AL Stolhman books . One thing that I have learned to do is to place a copper river at the throat of the knife sheath made from 12 or 14 gouge copper wire in the hole before the first stitching hole to prevent the knife from cutting the end of the stitching And another at the toe of the sheath. Good tip with the block of wax to lube the hole punch . A cobblers trimming knife works nice to trim welts . I have never heard of micron fishing line. I am a fisherman . A micron is a metric measurement of fibers . Are you using Dacron fishing line ? Or a Kevlar line like Spiderwire ? I use linen soling or harness thread , prewaxed, but keep a cake of beeswax near Although Barge has been around for years Elephand brand contact cement is better . Do you ever do hand lock stitches ? If you haven't consulted with an Orthopedic surgeon. Look into having a minimal invasive microscopis shoulder surgery if you have arthritis on the tips of collar bones impinging on the rotator cuff nerves . It worked for me
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thanks Gary I enjoyed this comment especially from a self taught peer perspective I too started with Al’s books as an early teacher I’ve never used rivets at the throat/toe but understand the benefits Yes I use the Cortland braided micron trolling line a lot Dacron too Do you have Instagram? I did a post years ago where I zoomed in close and photographed the braided micron and Ritza thread together No visual difference I’ve seen Kevlar thread but never found any thick enough to try Also never heard of Spiderwire, harness thread or Elephand glue I repaired team harness for years for the rodeo parade community in Tucson Thx for the microscopic surgery info will definitely look into that Again I appreciate the discussion and if you’re ever in SW Arizona look me up and we’ll talk shop as I enjoyed this greatly
@freddiemoretti8456
@freddiemoretti8456 2 ай бұрын
Viktor, it looks really nice even with a minor blunder. Great points to help in the future. I will be sure to try your method for creasing, maybe even heating one blade of the dividers. Back in the eighties when I made a few custom hand stitched halters I prepunched the holes using the awl on the Campbell Bosworth Sewing Machine after removing the open eye needle. Seeing your fingers close to the drill bit reminded me of the time I put the awl through the tip of my index finger. Luckily I was able to stop the machine before the needle came up from the bottom. Method does not require critique when the finished product comes out looking so good. Thanks for sharing! Cheers...Freddie
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
@@freddiemoretti8456 Thanks Freddie and I love the idea of heating one end of my wing dividers to crease with I’m going to try that I can also visualize your near impalement with that classic old machine Thanks for your kind words my friend
@freddiemoretti8456
@freddiemoretti8456 2 ай бұрын
@@viktorgeorge9144 I did heat the dividers and it worked well. I may round off the one end to widen the crease wee bit. Much easier to use than regular creasing irons. The awl did actually go through my finger.Lesson learned.
@deweywest3305
@deweywest3305 Ай бұрын
Thanks, I make knives with deer antler handles and the sheaths for them. I need help with the stitch. I didn't know to use 2 needles. Thanks.
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
I’m glad this was helpful Thanks for commenting Dewey
@JohnTBlock
@JohnTBlock 2 ай бұрын
I'd be using my stitching horse on both the belt loop and welt stitch....I know you have a couple, saw them on your "shop tour" vid. Yet I've not seen you use one, that I recall! 😂
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
@@JohnTBlock You are correct sir!! 😂 I think I’ll use my 1920’s stitching horse on my next one🙌😂
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thanks Theron! You made my day with this comment I started using this setup long before I knew it shouldn’t be done this way Allegedly 😂 Anyway, I appreciate your honest feedback and just remember to take the bite off of the new bits with sandpaper and it’ll work just as well for you, especially with your experience 🙌
@TonyNicholls-gi9le
@TonyNicholls-gi9le 2 ай бұрын
As always Georgie, terrific tutorial. Luv the side-by-side start and finish stitches, yet another tip for me to utilize. BTW, the north of the border mail ain't too swift.....LOL
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
@@TonyNicholls-gi9le Thanks Tony Sometimes the devil is in the details 😂 I can’t believe our individual mail systems don’t play well together. Cheers my friend
@maryrosecarroll4558
@maryrosecarroll4558 2 ай бұрын
Thanks learnt a lot. Not I need to buy another gadget for my dremel🤪, onto my wish list it goes.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thanks Mary Rose🤣 I can so relate
@_BigLife_
@_BigLife_ 2 ай бұрын
New subscriber. When I make axe masks or knife sheaths, I use a drill press because I don't have stiching irons that will punch all the way through 30+ oz of leather. Keeping the hols completely vertical has been a problem sometimes.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thanks for subscribing and yes trying to stitch up such thick leather goods straight and 90 degrees in challenging I appreciate you
@jonas-mb6cf
@jonas-mb6cf 2 ай бұрын
Coach did it again 👍🏻great video they are so helpful and well explained
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
@@jonas-mb6cf Thank you again Jonas You are too good to me 🙌🙌
@JosephBrien-iq9xm
@JosephBrien-iq9xm 2 ай бұрын
Love the video and wisdom! A question: Why not glue the sheath front/back/welt together first, then lay-out the stitch line/spacing and pre-drill the holes on the drill press prior to stitching? I may have missed an important detail in your video - forgive me. I have restored Vibram-soled hiking boots by gluing the the sole/welt/uppers together with Barge cement, then drilling with a 1/16” bit in a hand drill, followed by sewing with a “Speedy Stitcher” with waxed nylon thread. The only problem I encountered (one time) was a narrowing of the toe box, which was remedied by soaking and stretching my boots by slogging though a swamp while wearing extra-thick wool socks. After a few blisters and wrinkled toes, I got another hundred miles of enjoyable hiking in those heavy boots!
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Hello Joseph Thanks for the kind words Your thought provoking question made me seriously ponder I think it’s just a process that I’ve become accustomed to which gives me the results I’m looking for I’m guessing now, but I don’t think I could drill a straight 90 degree hole without what I call the pilot holes Also this method helps me establish the more complicated stitch lines for the cam-loc welts and stop welts I use for some sheaths I enjoyed the banter about your experiences and for making me stop to ponder 🤝
@JosephBrien-iq9xm
@JosephBrien-iq9xm 2 ай бұрын
Makes sense! Also, I love your sheath design and craftsmanship. I was given a Speedy Stitcher when I was 10 years old and used up the 150 yard spool of thread in about two years - repairing camping gear, shoes, etc. and making sheaths, belt pouches… I’ve collected more tools and learned many techniques, even tanned a few hides. Your work is beautiful! Thanks!
@johnledger7763
@johnledger7763 2 күн бұрын
Thanks for sharing your wealth of Knowledge with us very easy to follow Very nice looking Sheath Sir..
@viktorgeorge9144
@viktorgeorge9144 2 күн бұрын
Thank you John Very kind of you to say 🙌
@davidstalter6006
@davidstalter6006 8 күн бұрын
You're a true craftsman Viktor.. I'm really impressed. Hope you'll be able to make me A few of your beautiful pieces for my ESSE IZULA,ESSE IZULA 2,ESSE 3,ESSE 5,AND my MORA bushcraft.. Thanks for the videos.. New subscriber and I'll be watching 🇺🇸👍✌️🙏
@viktorgeorge9144
@viktorgeorge9144 6 күн бұрын
Thanks David! Sounds like you have a great collection of Essee knives I only have their PR-4 but sounds like a good excuse for me to get more I appreciate the nod
@apar1560
@apar1560 2 ай бұрын
Awesomeness ! THANKS. ...Alan in 🇨🇱
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
No, Thank you Alan I appreciate you watching!
@chuckvoss9344
@chuckvoss9344 2 ай бұрын
Amazing work and amazing process.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thank you Chuck! It’s appreciated
@nickjanczak9665
@nickjanczak9665 2 ай бұрын
Great instructional video - thanks!
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thank you Nick
@malr1975
@malr1975 2 ай бұрын
Great Scott! This is fantastic work! I would like to make a gun strap but haven't ever worked on leather before. Can you advise on any small starting kit I might buy or the key items I should buy to start? I have a drill press and Dremel type tool. You should be proud of yourself, great work but also an amazing video tutorial. I wish I was taught this skill at school.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
I left a long response that didn’t attach to your comment but it’s somewhere here in the comments Thanks again for your kindness
@Pathfinder76
@Pathfinder76 2 ай бұрын
Thank you for doing this video. Great information and tutorial.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
I’m so glad it was helpful and I appreciate you taking the time to leave a nice comment
@franktaylor5417
@franktaylor5417 Ай бұрын
Enjoyed your work today, I’m 63 and agree it sucks having daily pain with no relief. I’ve been a rancher my entire life to date and have had both elbows and both shoulders injected to relieve some pain as well as increased motion. Docs have told B Me that sitting or relaxing with arms elevated on an armchair is very bad for motion and increased pain. I see your arms are resting on your beautiful green chair. Just a note that may be of some interest to you. Beautiful craftsmanship. N B Canada
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Hey Frank I responded to your nice comment but it didn’t attach to your comment It’s in the comments somewhere 😂 Definitely not tech saavy
@tombratton400
@tombratton400 29 күн бұрын
Great video. Enjoyed it.
@viktorgeorge9144
@viktorgeorge9144 29 күн бұрын
Thanks Tom I appreciate your kind words
@ottemark
@ottemark 2 ай бұрын
As always; great video!
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Too kind my friend Thank you
@johnearhart8811
@johnearhart8811 2 ай бұрын
Excellent video.. I do a lot of things just like you. Excellent job and teacher.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
@@johnearhart8811 Thanks John Great minds think alike Appreciate you
@singleshot2218
@singleshot2218 2 ай бұрын
New sub for ya! I noticed a coffee cup you have, I’m a Blackout coffee fan..invested in the company as well. Love most of the flavors too! Take care and stay safe! God bless!✝️🙏🇺🇸🇺🇸🇺🇸
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thanks for the support by subscribing to the channel I definitely do a lot of coffee🙌
@oldbonesbushcraftrodjackso474
@oldbonesbushcraftrodjackso474 Ай бұрын
Beautiful work
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Thank You!
@paulbodypumper1
@paulbodypumper1 2 ай бұрын
Looks very good brilliant video thanks👍👍
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Appreciate that! Thanks Paul
@barryjorrie
@barryjorrie 4 сағат бұрын
Love it!! Good job brother
@viktorgeorge9144
@viktorgeorge9144 2 сағат бұрын
@@barryjorrie Thank you Barry I appreciate the fact that you took a moment leave a positive note!
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Hello Frank and thanks for the kind words Funny you mention the armchair motion because that’s when I feel the most discomfort 😂 I just assume that it’s caused by too many years of working hard and playing hard 😅 Thanks again
@doylerabjohn3435
@doylerabjohn3435 2 ай бұрын
I have an antique knife (477 German) made, I need a sheath for.....Very instructional, Thanks
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
I enjoy antique knives the best Vintage knives of days gone by were built right Even better with a sheath you make yourself 🙌
@jose3541
@jose3541 2 ай бұрын
Thank you for sharing,I did learned a lot.you have a new subscriber
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thank you Jose I sincerely appreciate your kind words and support by subscribing to my channel
@MikeMiguelPimentel
@MikeMiguelPimentel 4 күн бұрын
By the way, when you’re looking at the screen, the first one the really dark one with them nipples that is my favorite one. I’ve never seen a press or a stamp tooling that way I mean, I’m sure I probably have but I like that that’s really nice.
@viktorgeorge9144
@viktorgeorge9144 4 күн бұрын
@@MikeMiguelPimentel Thanks Mike! That’s what I call my Gila Monster pattern Made with three different sized seeder stamps. On one of my tips/tricks videos I show a quick description of that process Thanks again
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thanks for the kind words Well at least you can repair the team harness yourself now. I wish I had a few horses especially a team to drive I’m jealous 😂 Keep making my friend and if you ever need help with your leatherwork don’t hesitate to reach out
@scotthaddad563
@scotthaddad563 2 ай бұрын
I really like the showing at the end of the video. That completed one dyed with the carved pebble finish is quite unique. I hope you don’t mind if I try to copy that pattern.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
@@scotthaddad563 Absolutely Scott Thanks, it’s what I call a Gila Monster pattern comprised of 3 different sized seeder stamps It’s tedious but the outcome is worthwhile Go for it
@scotthaddad563
@scotthaddad563 2 ай бұрын
@@viktorgeorge9144 thanks I will.
@ddblairco
@ddblairco Ай бұрын
very nice , thank you
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
@@ddblairco I thank you for stopping by and leaving a nice comment
@mikeboone4425
@mikeboone4425 2 ай бұрын
Will done Nice and clean and at 82 now I have a few screw up . Unfortunately have not been able to do much the wife has dementia now for about 5 years now. Just know time for anything other than my kitty. Stay safe good looks .
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thanks Mike I’m sorry you’re having a tough moment Hopefully you can take a few minutes for yourself in your shop Leatherwork is, as you know, very therapeutic
@Gator-357
@Gator-357 2 ай бұрын
I've been doing this for a few years now using a Dremel attatched to a drill guide, which works pretty well for me. Artharitus called for a different way of stitching and that is what I came up with. Doesn't matrer how you get the holes in or even how you get the stitching done, as long as it looks good and holds nice and tight. People that have a provlem with nontraditional methods are just mad because they didn't think of it and they ned to justify their closed mindedness and lack of confidence in themselves
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
@@Gator-357 Exactly right Whatever works No rules🙌 Makers will always adapt methods to accomplish similar tasks Thanks for stopping by
@TuttleScott
@TuttleScott 2 ай бұрын
I use a tiny allen key I sharpened in the drill press and it seems to work better than a drill bit for some reason.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Thanks Scott That is a first and I love it!! No rules 🙌 I appreciate you stopping by the channel
@AlfJDale
@AlfJDale 2 ай бұрын
❤Super video as allways, you got the gift 👌👌Amazing attention to details😊
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
I so appreciate your support and especially your kind positive words Thank You🙌
@bobbates7421
@bobbates7421 Ай бұрын
I am new to KZbin channel. I just discovered it by accident and I subscribed. Here’s my question. What is your table made out of. It seems like you’re able to just drive your tools through the leather and it doesn’t stick to the table, but I’m assuming it also doesn’t hurt the tablejust me the table like it. Please let me know. Thank you very much.
@viktorgeorge9144
@viktorgeorge9144 Ай бұрын
Thanks Bob for subscribing I sincerely appreciate it On my workbench I have an 18” X 24” X 1” poly board similar to to a kitchen cutting board. On top of that I have a self healing matt The poly board I purchased at a restaurant supply house and the matt at any craft type store
@lorneclose7312
@lorneclose7312 2 ай бұрын
Question not really related to this vid but still relevant. When using a dark brown or black dyed leather with white stitching how do you keep the thread white. I use a waxed thread but it always end up looking dirty.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Dark brown / black dyes are notorious for rub off so you have two choices 1. Buy pre dyed leather or 2. Surface burnish the now dry leather after you’ve dyed it until no dye residue rubs off onto a cotton white tee shirt Lots of elbow grease If you have Instagram I show some power burnishing there Then sew and finish with choice of wax based or Resolene
@anthonycordovano2438
@anthonycordovano2438 26 күн бұрын
Great instructions. Seems to me that, if you put the belt loop on the other side or initially punched the pattern holes on the other side, you would not need the jig to drill the final holes. Belt loop would have been up.
@viktorgeorge9144
@viktorgeorge9144 26 күн бұрын
Thank you Anthony I’m not 100% clear on your suggestion but it’s probably me I think I have been doing it this way so long from being self taught that I can’t wrap my head around it 😂 I always punch and drill from the front face side of the sheath which necessitates the use of the jig
@anthonycordovano2438
@anthonycordovano2438 25 күн бұрын
After I posted the comment, I started to think perhaps the punch makes square holes vs round (drill). The square hole might look better/neater in front. Great instructions for stitching leather.
@RAMPHD
@RAMPHD 2 ай бұрын
I have used a thin drill bit and then wrap with rawhide lace. Or I cross stitch. A nice look. I have had issues stitching that thick with my Cobra 4. Stitch spacing gets complicated. RAM Leatherwork
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
@@RAMPHD I bet that rawhide lace look is amazing Thanks for taking a moment to comment
@RAMPHD
@RAMPHD 2 ай бұрын
Also, it is very helpful to soak the lace (Leather New) for a few minutes-it is easier to lace and dries tight. Thank you!
@alterweiermann9773
@alterweiermann9773 2 ай бұрын
Ein super Video. Wieder habe ich dazu gelernt! Danke dafür! Als du mit dem Zirkel abgerutscht bist habe ich mich sehr erschrocken. Liebe Grüsse von der Ostseeküste Deutschland.
@viktorgeorge9144
@viktorgeorge9144 2 ай бұрын
Danke Danke! I’m so glad you learned something new Thank you as well for your kind words and support all the way from Germany I worked in Berlin for 3 years but sadly never visited the Baltic Sea One day🙌
@alterweiermann9773
@alterweiermann9773 2 ай бұрын
@@viktorgeorge9144 Danke für deine Antwort. Ich habe mich sehr darüber gefreut.
@e.collins2768
@e.collins2768 26 күн бұрын
So why can't you glue everything and drill the bottom 2 layers in one go? Does the drill bit try to bind or does it try to wander off line?
@viktorgeorge9144
@viktorgeorge9144 26 күн бұрын
Probably just an over abundance of caution The welt leather is very firm and I’m afraid the bit might wander aliitle It doesn’t take a lot of extra time to pre drill and I try to make the final stitch line look the best I can make it Thanks for your question I’m somewhat OCD 😂 that too could explain a lot!
@e.collins2768
@e.collins2768 26 күн бұрын
@@viktorgeorge9144 makes sense. I'm also OCD but my patience doesn't match haha
The Infamous $100 Leather Sewing Machine: Unboxing and Setup
23:18
The Art of Craftsmanship
Рет қаралды 997 М.
😜 #aminkavitaminka #aminokka #аминкавитаминка
00:14
Аминка Витаминка
Рет қаралды 1,8 МЛН
"كان عليّ أكل بقايا الطعام قبل هذا اليوم 🥹"
00:40
Holly Wolly Bow Arabic
Рет қаралды 13 МЛН
How to whistle ?? 😱😱
00:31
Tibo InShape
Рет қаралды 16 МЛН
How To Make A Churchwarden Pipe
10:30
Eccentric Artisan
Рет қаралды 229 М.
The Drill Press That Does EVERYTHING
19:51
Essential Craftsman
Рет қаралды 66 М.
How to Hand Stitch Leather: Get Better, Fast!
16:12
Claridge Leather
Рет қаралды 2,5 МЛН
How to Use Every Dremel Bit
20:02
Log's Carving Club
Рет қаралды 733 М.
Making a Knife From a Circular Saw Blade
39:13
The Art of Craftsmanship
Рет қаралды 1,4 МЛН
You can Hand Stitch Leather (Easily)!
28:21
Mascon Leather
Рет қаралды 264 М.
Melting Copper Wire Into a River Table
16:53
Burls Art
Рет қаралды 1,7 МЛН
黑的奸计得逞 #古风
0:24
Black and white double fury
Рет қаралды 25 МЛН
Общаемся в тг - Юлия Смирнова) Заходи - поболтаем)
0:38
Виталий Смирнов
Рет қаралды 1,3 МЛН
Qué disfraz os gusta más?😂
0:10
Celia Reina
Рет қаралды 9 МЛН
Celia lo hizo perfecto 🥹
0:12
Cristobalgsss
Рет қаралды 12 МЛН