THANK YOU for posting this how to video. I've been using my Motion Pro wrong for a looong time. Now after watching this I got it right. Much thanks
@davidevelyn5303 жыл бұрын
Same here. I feel like an idiot......
@findingneutral3 жыл бұрын
@@davidevelyn530 I had 3 bikes chains ALL jacked up. Got to love You Tube and their tutorials to help us all along 🤤👍
@kokobeatz7222 Жыл бұрын
Same! Felt like it was the right way to use it too. But it was like upside down. I just did my chain and I felt a bit tight. Found this video. Going to recheck and see how off the measurement is compared to the way I was doing it before
@kokobeatz7222 Жыл бұрын
Just rechecked. With tool measuring the “right” way and then again with a tape measure and it was still accurate to what I measure yesterday measuring it the “wrong way” they way I did it before actually made it easier to read as opposed to the correct way
@omarvillegas71612 жыл бұрын
Partzilla is the best 🙏🙏🙏 You guys helped me save hundreds and hundreds on parts and oem rebuild parts and kits .
@gsxrunit2 жыл бұрын
I wish you demonstrated setting a zero for different bikes or circumstances I don't quite get what you mean and I'm using it on a sport bike
@pp-si2dm Жыл бұрын
Me neither. I find the motion pro fiddly and confusing. I use a good old tape measure and have thrown the Motion pro to the back on my tool box.
@broderp2 жыл бұрын
Looks like you're only measuring the downward deflection, what about the upward deflection? The chain is behind the swing arm and probably has some deflection upwards. Your 40mm may actually be 60 mm or more. What am I missing?
@midnightrider723 Жыл бұрын
I said the same thing and my 2023 KTM manual actually says to measure for the absolute slack measurement which is what the top measurement gives. There are two measurements the Motion Pro Slacksetter gives and two different sets of numbers on the tool just for that so yeah, not sure why no one is taking the absolute.
@midnightrider723 Жыл бұрын
Said the same and measure using the absolute for my 2023 KTM 350 SX-F
@cmagma39533 ай бұрын
the size of the chain is important. You are leveling with the lower tooth, then measure with the upper tooth. The difference isn't the slack.
@IcedOmega13 Жыл бұрын
I really appreciate this video
@RCbashingtheKRATON4 жыл бұрын
Sweet tip and tool.
@PartzillaParts4 жыл бұрын
Thanks for checking out the video!
@49Roadmaster4 жыл бұрын
At first I thought this was just a useless gimmicky gadget to take my money. After you explained and demonstrated it intent my mind has been changed. What a simple and great idea! Presently on my bikes I have to place the bike on a flat surface, Clean off the floor to get down and take the measurements, Get gloves on to not grease my fingers up, Place a machinist square on the ground, Get a flashlight so I can see the lines on the scale, Lay down on the ground while trying to read the fine lines for the UPPER measurement while holding the flashlight and moving my head around so I can see through my bifocals while pressing the chain up all while worrying about parallax. Record that measurement, Then Repeat for the Lower measurement, Do the calculation, Forget the upper measurement and have to repeat... For this reason I do not do it as often as I should. A 10 minute ordeal just turned into 30 seconds. Will be one of my next purchases.
@PartzillaParts4 жыл бұрын
This is awesome to hear, Paul. Really glad we could cut seven steps out of that process for you. The Slacksetter tool is a pretty ingenious little gadget that saves us a ton of time. Appreciate the comment!
@angiefav18473 жыл бұрын
Great tool unfortunately will only work on all bikes only this type of swing arm
@Ecast23offroad3 жыл бұрын
How do I use this on an atv
@tsenglalonde52212 жыл бұрын
meh better use a tape measure or a ruler
@johnscott98293 жыл бұрын
Both of my bikes call for chain measurement of 5-13mm from swing arm rendering this tool useless.
@kingkrimson87712 жыл бұрын
The Slacksetter Pro has a dual scale that can also measure deflection from the swing arm, that's the one you need
@johnnyappleseedz422 Жыл бұрын
Can't see anything with your hands in the way.
@CriscOnSmootH6 ай бұрын
This tool sucks. Has "absolute measurement" and "slack measurement". Wtf even is that?? Which side am I supposed to use? I ended up using a ruler and returning this garbage
@djlancer885 ай бұрын
Thats hwo I feel after trying to use it today lol
@mexifry222 Жыл бұрын
Why demonstrate on a bike that doesn't requiring zero-ing when most people will have to zero their tool. Silly willy
@CmdrTigerKing2 жыл бұрын
this thing is impossible to use properly, never get a accurate reading
@julianspringer1835Ай бұрын
Trying to measure something you can eyeball. Waste of money.