Huge Help. Bite Sized but very informative! Thank you.
@aiyogarage10 ай бұрын
Hey no worries! Let me know if you have any questions and I’ll make a video on it
@HughWoo8 ай бұрын
Basic and to the point! Doesn’t get any better than that. Thanks man! HVAC issues right now and company can’t make it until the middle of next week so I’m putting myself through KZbin university right now trying to figure it out lol.
@aiyogarage6 ай бұрын
Thank you! Hope it all works out!
@nowpay-88 ай бұрын
Exactly what I needed at this time thank you
@aiyogarage8 ай бұрын
No worries! Glad I could help!
@matthewgincerowski26914 ай бұрын
Super!!
@lt789510 ай бұрын
Good video. Thanks
@aiyogarage10 ай бұрын
No worries! Glad you enjoyed it.
@mikemalone686210 ай бұрын
Thanks dad! 😊
@aiyogarage10 ай бұрын
Haha don’t call me dad! I’m just some guy in a garage. But that sounds just as weird. Let me re-phrase. I am a human within a structure trying my best to relay basic information to other humans for the betterment of society.
@ChefRomeo18 ай бұрын
Thanks Buddy 👍
@georgedavall9449Ай бұрын
FLUKE 117 !!!
@bimmer11106 ай бұрын
Well explained lad 👍
@aiyogarage6 ай бұрын
Thank you!
@hostelfriends41828 ай бұрын
INcredible
@aiyogarage6 ай бұрын
Thank you!
@projet2907Ай бұрын
Thanks
@aiyogarageАй бұрын
You bet! I have tons more on meters on my channel.
@projet2907Ай бұрын
@@aiyogarage Will check It out :-0)
@TallTattedTyler9 ай бұрын
Awesome Video Dude!! I didn’t know any of this
@aiyogarage9 ай бұрын
Follow me! I know the way!
@sukhrajcheema84916 ай бұрын
thanks bro as a first year apprentice this video was greattt!
@aiyogarage6 ай бұрын
Glad it helped!
@user-un8fi1bn7h6 ай бұрын
Thank you
@aiyogarage6 ай бұрын
You bet!
@pradeep673616 күн бұрын
How to measure current
@user-bb7ng3vb3q4 ай бұрын
Called diode tester that is buzzer
@faithcooke42315 ай бұрын
How to you test to determine low voltage like 12v or 24v. I have a kitchen wire that is hanging and I think it’s supposed to have been for under cabinet lighting but I don’t know what voltage it is.
@aiyogarage5 ай бұрын
You would just test its voltage. But you’ll need to know if its an AC or DC circuit
@poisondaddy6 ай бұрын
What about amps? Can you measure amps with this type of multimeter? I bought a basic one and can't figure out how to use it. Need to check for battery draw/parasitic test.
@aiyogarage6 ай бұрын
Yes you can use this type of meter to measure amps. It is not demonstrated in this video.
@shonuff62217 ай бұрын
I gots lots of questions
@aiyogarage7 ай бұрын
Watcha got?
@kelltale10 ай бұрын
I have a question: I watch alot of repair videos since I've been doing this kind of work for years, and whenever there's a video about "no power, checking the 12V rail, measuring if this cap is short to ground, what's the resistance of this, etc." I never know where they get the info of what makes a component have good or bad resistance, what a short to ground means, how and where to inject voltage, etc. I'm a bit lost. I never needed a multimeter for my kind of work (I only recently got into board level repairs), but I would like to have a better understanding. Any info on where to start would be appreciated if you have the time!
@aiyogarage10 ай бұрын
I think those are all great questions. And I will make a video about all your questions. I think a great place to start, is with a very basic diagram, and trying to interpret it. You’ll need to understand diagrams to understand circuits. I started with a 1970’s headlight diagram. Once you understand basic circuits you will start to understand these terms and why they’re important. Hope that helps.
@kelltale10 ай бұрын
@@aiyogarage that makes sense. hopefully those videos will help further once they are uploaded. thanks for the reply!
@aiyogarage10 ай бұрын
@@kelltale hey no worries!
@michaelfairchild5 ай бұрын
First touch thing you want to measure with negative lead, then with positive one. Touching with red one, will push current to the black lead and you mind find it out the hard way.
@aiyogarage5 ай бұрын
What are you talking about? Found out what the hard way?
@ryanshepherd64574 ай бұрын
Ok so, receptacle, when I punch Black to Ground, then Red to Hot, I'm getting 14V...my receptacle tester says "open ground"...and that outlet gets hot. Yes im on AC. What's going on?
@aiyogarage4 ай бұрын
Sounds like it could be poor grounding or a loose connection. That’s my best guess
@rawiahzulkipli27878 ай бұрын
if im measuring voltage for earth battery basically a soil battery, i should use V hz or V dc?
@j58920007 ай бұрын
Hz is for hertz. A measure of frequency
@j58920007 ай бұрын
@@deang5622 I mean a battery can't but turning on an off dc can give you hertz
@j58920007 ай бұрын
@@deang5622 I know. Also ac ripple can exist alongside dc as well
@aiyogarage6 ай бұрын
I would use V Dc. V Hz has to do with frequency. Like if you’re measuring the frequency of AC voltage. Hope that helps
@niconine2688 ай бұрын
You say its gng to 'ring out' when you have a complete circuit ? Couldnt get that one. Please clarify
@aiyogarage8 ай бұрын
“Ring out” is just another way of saying that the meter will make a “beep” sound
@niconine2688 ай бұрын
@@aiyogarage Oh cool. Thanks gotcha
@robert-moyse9010 ай бұрын
How to check 24v dc power supply outlet?
@aiyogarage10 ай бұрын
You'll want to make sure to have your meter in Volts DC mode. That's the mode with the "V" and it'll have a straight and dotted line about it. Red lead is for positive and black lead is for negative. Hope that helps.
@robert-moyse9010 ай бұрын
@@aiyogarage legend
@Phinnigga7 ай бұрын
I have continuity on 1 side. Testing from receptacle to switch has continuity but testing from switch to receptacle there is no continuity. Please help.
@aiyogarage7 ай бұрын
Please be careful. You're at risk for shock or electrocution. You could be missing continuity at the receptacle from the switch, if the switch is off, or if you're not testing the correct wire. Hope that helps.
@Phinnigga7 ай бұрын
@@aiyogarage I remove the switch and receptacle when testing. I wire nut the hot and neutral on the switch then test the receptacle wires which shows continuity. When I wire nut the receptacle and test the switch wires, I don't get continuity. The only thing I can think of is that it's broken somehow.
@adrianr5145 ай бұрын
How do you like that 115?
@aiyogarage5 ай бұрын
I honestly really love it. I’ve used it as a professional for years. If you need anything with more capability than this, your place of employment should be providing it for you. Other than that, this meter is bulletproof proof.
@corruptedbrain66 ай бұрын
shouldnt there be zero resistance in that wire or is it going bad ?
@aiyogarage6 ай бұрын
Great question. The short answer is there’s always going to be resistance in a wire. Sometimes only a very small amount
@corruptedbrain66 ай бұрын
@@aiyogarage i suppose depending what the load is then?
@theexceptionalone4 ай бұрын
How risky is it to use the multimeter to test a car battery?
@aiyogarage4 ай бұрын
A car battery needs to be “load tested”. I would recommend taking the battery to your local automotive store for testing. They should test it for free for you. Hope that helps.
@rosariodagosto64846 ай бұрын
WHATS THAT YELLOW BOX THING AND RED BLACK WIRES DO???
@aiyogarage6 ай бұрын
It makes electrical measurments.
@playmaker70945 ай бұрын
😂😂 really?
@aiyogarage5 ай бұрын
@@playmaker7094 🤷🏼♂️ guy has a question idk
@playmaker70945 ай бұрын
@@aiyogarage he is better left to his own devices(Bastille) 😄
@EdenPrairie_OldsGuy5 ай бұрын
Which meter is that?
@aiyogarage5 ай бұрын
It’s a Fluke 115. Solid meter
@EdenPrairie_OldsGuy5 ай бұрын
@@aiyogarage does fluke make meters that aren’t as expensive?
@aiyogarage5 ай бұрын
@@EdenPrairie_OldsGuy the Fluke 101
@550Benz6 ай бұрын
How bout amps ?
@aiyogarage6 ай бұрын
Current needs to be measured in series
@550Benz6 ай бұрын
@@aiyogarage which symbol would the knob have to be in when testing ?
@mark5150ty8 ай бұрын
You do realize that the meter comes with a manual right😂😂😂
@aiyogarage6 ай бұрын
A lot of people, even professionals are not competent with a meter. This video is only intended to help. I don’t see what’s so funny 🤷🏼♂️
@mark5150ty6 ай бұрын
@@aiyogarage anyone that can't read a meter is not a professional. I find it funny because people are so Reliant upon the internet that they don't know how to read anymore and have absolutely no comprehension skills.
@aiyogarage6 ай бұрын
@@mark5150ty I understand where you are coming from. I’ve worked with a lot of professional electricians/mechanics/technicians/tradesmen, that do not understand the fundamentals of using a multimeter. It’s an issue of training and education. And a lot of those people are visual learners, sometimes they have a hard time interpreting the manual.