HOW TO USE A PAINT SPRAYER LIKE A PRO

[@Caliber8Tools]

Join the Caliber8 Tribe to get a free ebook on 10 simple ways to beautify your home plus more home improvement and diy tips- join.caliber8.com Get the Ultimate Utility Bag use coupon code Tools- www.caliber8.com/product/caliber8-ultimate-utility-bag/

[@Gskenejhh]

I'd rate this one of the best KZbin instructional vids I've ever seen. Precise, concise, no fluff. About as close to a bullet point list as it gets. Thank you!

[@Caliber8Tools]

Glad it helped. Thank you.

[@TheAndyCzech]

You took the workds out of my mouth!!

[@giancarloteoli6879]

No muss or fuss in the explanation. Straight to the point. Explained very well with good camera work. This was exactly what I needed to get started. Thank you. Actual painting time is only 10 percent of the job. Prep was what took the longest.

[@Caliber8Tools]

Right about the prep time.

[@NFRG-SlinkyMontana]

Frfr tho

[@Urpoolboy59]

Gotta agree with everyone else. Straight to the point, no story telling or excessive yapping. I'm buying the same sprayer tomorrow and just happened onto this video. This Gentleman should be doing how to video's for a bunch of products. This is how it is done! Thanks 👍

[@Caliber8Tools]

Glad it helped.

[@lovetrump1088]

Just don't move your spray gun like he did at 9 minute mark...he has a Horizontal Pattern as pating comes out his gun and is also moving his hand back and forth Horizontally (left to right and back) which is totally wrong, you can never spray like that. To Paint correctly, with the pattern in the gun coming out from Side to Side...you move your hands UP and Down and then you can get coverage and overlap your spray properly. This is good breakdown of the product (must be sponsored) but this does not show how to paing properly at all. He could have watched any of hundreds of other videos to who how to do that. Vertical Pattern from Gun - Move hands Horizontally Horizontal Pattern coming from Gun - Move hands Vertically Always move against the spray pattern not with it!

[@sueyist]

Just bought this sprayer for my house. This is the 3rd video I came across to help with the set up and how to use it. Hands down the best. The other videos didn't even go over the buttons/knobs on the machine. This was The paint sprayer for dummies video that I needed. Thanks a million

[@Caliber8Tools]

Glad it helped. Appreciate the feedback.

[@Surfmus]

Graco's channel makes it extremely hard. Your video is simple enough to start working on it. Thanks!

[@Caliber8Tools]

Glad it helped.

[@DarbyEvents]

I had a horrible first experience with this product. Almost returned it and watched your video and you made this is so easier for someone with ZERO clue. Thanks for taking the time to make this video. New sub here!

[@Caliber8Tools]

Glad you didn’t give up.

[@ValricoRex]

Graco should contract with you to do their product videos. Very professionally produced video, straight forward explanations without the cringe-worthy attempts at humor and goofing around so many youtube "instructors" do. Looking forward to seeing what other videos you have made. Thank you for all the effort that must have gone on behind the scenes to put this quality of content out there.

[@Caliber8Tools]

Appreciate that. Thank you.

[@MrNonDescript01]

I came into the comments to say that very thing - such a well-done video without a lot of fluff.

[@speedyali764]

subscribed as well.

[@prof113]

I was thinking the exact same thing. So clear and concise.

[@islanddreaming8591]

I was going to say the same thing to @ #Caliber8Tools myself .., i've never seen a tuition video before that was done more clearly, precise, and straight to the point as this was done. Great effort Man, there's a professional career out there waiting , needing , and begging for people like yourself 👍

[@Huiando]

Great vid! Also, try spaying on the cardboard first. If gun drips - increase pressure, if you see two lines on the sides of the spray pattern and not enough paint in the center - decrease pressure!

[@Caliber8Tools]

Thanks, great tips.

[@rodolforubio706]

What is pressure with latex what is approximate sqft per gal thanks

[@Power5]

Yeah would have loved some tips on where to start with pressures for interior latex paint. We all know paint is different but should pressure be below start or above as a starting point for latex?

[@awhite55grands]

Can’t tell you how much I appreciate this video. I bought the machine, but thought about returning it because it’s intimidating! 🤯 Didn’t want to fail with an expensive machine. Even the dang owners manual nearly scared me off! 😮 😅 But you broke this down so completely, I’m about to tackle this thing with confidence! Thank you so so much!! -Angie

[@Caliber8Tools]

Hey, glad it helped. You will be fine.

[@lurklingX]

this was me, yesterday. i was just staring at the quick guide and it's like i couldn't read. even that guide left me with a few questions and i was trying to go between it and the book. like WTF is xyz part????? the hose adaptor isn't even called out on the parts list, and they act like they provided a cleaning brush but didn't. then there was the worry about wasted paint, and issues during operation............ UGH. here's me still cleaning up at 3AM.

[@abdullahshaik4784]

I got it in yard sale for 100$ not sure how to use it this really helped . But I have to say still so many steps to get this machine just to start the painting wish they made simple machine for basic home projects.

[@hospitaladministrator3359]

Let’s go Angie! How’d did it go?

[@su5ho]

Very helpful, thanks for the video.

[@jackpine4347]

Thanks for the video! I just bought this exact model 2 days ago and followed the directions provided to get started. Wish I had known about your video sooner, would have made the process much easier. I used it today with a solid stain product on my deck rail and the privacy fencing I have attached to it on the outside. Before, each section between the posts, which were about 8 feet apart and had around 15 1x1 balusters between them, took around an hour or more to apply the solid stain with a brush and roller, because of all the nooks, crannies and surfaces to cover. I finished applying the solid stain in about 8 minutes using the Graco Magnum X5 to the 25 feet of rail and fence I had left to cover! It was amazing. The time sucker was the cleanup of the sprayer and installing Pump Armor liquid for storing the unit. Being it was the first time I ever did it I am not surprised. One thing to note: it is important to thoroughly mix the product you will be spraying and then strain it with a paint strainer prior to running it through the sprayer. Any debris in the paint can clog the machine and accelerate wear of the sprayer tips and pump motor.

[@Caliber8Tools]

Great job. Glad it helped.

[@Sonicboom659]

Dude this is far better than Graco’s tutorial. Thank you

[@Caliber8Tools]

Appreciate the feedback. Glad it helped.

[@kennethbrown221]

Oh boy!!! First time using a sprayer and I was having Anxiety like crazy. Thanks for simplifying the process. Feel better and made me feel i can do this. Like the other person said, Precise, concise, no fluff. Thank you!

[@Caliber8Tools]

Glad it helped.

[@Mike-wh9dq]

Great job ! A 'newby' such as myself really appreciates all of the detail and time you took to make sure we understand the unit. Thank you so much !

[@Caliber8Tools]

Glad it helped.

[@OJoyBaby]

Wow! I purchased my X5 about 3 years ago, likely just before this one was made. However after watching a ton of videos on set up and use, I still have not used it. Now I am saving this video and am going to pick up paint this week and get started. This video took the fear out of me being able to paint my entire house by myself. Thank you.

[@Caliber8Tools]

You’re welcome. Glad it helped.

[@JSambrook]

This is a very well-done video. It was a pleasure to watch. Great job, and thank you.

[@Caliber8Tools]

Thank you. Glad it helped.

[@Icyrails12]

This is the BEST instructions on this paint sprayer that I have found on KZbin. Very clear instructions. Thanks so much!

[@Caliber8Tools]

Glad it helped.

[@kenwalsh686]

Excellent video! Everything was well explained and easy to follow. I used this sprayer for the first time today and followed the steps you outlined here. I’ll definitely have to check out your other videos too. Thanks for posting.

[@Caliber8Tools]

Appreciate you. Glad it helped.

[@Harold-l3i]

Nice Job, I bought one of these sprayers some time ago and found the instructions at the time to be to complicated to start using it. Your video may change my mind and I may take it out of the box and try to use it now.

[@Caliber8Tools]

Glad it helped. Let’s do it.

[@MidnightHabit]

I've watched a bunch of these. Yours explains things more thoroughly than any of the others. Well done.

[@Caliber8Tools]

Glad it helped.

[@armandomilton7645]

Modern equipment, but a lot of work and waste of material

[@ytpg7]

I agree with all the other positive comments - top notch explanation! Buying the same sprayer this week to do my very first spray painting job. Will do the walls and ceiling of my newly renovated 1700 sq ft house - plus the primed doors, window casings, and baseboards - so this video is custom made! Thanks! Brilliant! I liked and subscribed instantly!!! 😊

[@Caliber8Tools]

Glad it helped. Thank you.

[@Shy-807]

Thank you for this video! Easy to understand for a beginner like me. I’m thinking of buying my first sprayer to start painting my kids’ bedrooms. Your instructions were very thorough, simple and direct. Glad that you emphasized the safety aspect as a lot of people tend to take it for granted.

[@Caliber8Tools]

Hey, glad it helped.

[@keithp115]

I received a Magnum project painter plus for my birthday. Your tutorial is by far much better than the Magnum website. Thank you sir for making me more confident when I am ready to paint my garage doors!

[@Caliber8Tools]

Glad it helped.

[@kevinmellander4972]

I loved this tutorial! I will be using a Greco for the first time to paint the interior of our home and this was extremely thorough and easy to understand. Thank you!

[@Caliber8Tools]

Glad it helped.

[@hermanortez982]

Awesome video. Clear and concise step by step instructions. I was hesitant to buy a paint sprayer, but after watching this video I'm definitely more confident in being able to get my prep work done. Thank you and God bless 🙏🏽

[@Caliber8Tools]

Anytime. Glad it helped.

[@TheBlueScarecrow]

Great video; great instructor. Gets right to the meat of the thing and leads you step by step through the process. My first job is coming up... Thank you so much!!!

[@Caliber8Tools]

Glad it helped.

[@khosrowmkh2554]

For someone who loves to paint .this was the best video, I saw on paint spray. thank you

[@Caliber8Tools]

You’re welcome. Glad it helped.

[@sunshyne8689]

Just purchased this sprayer and I’m so glad I came across your video. I was worried about not cleaning it properly

[@Caliber8Tools]

Glad it helped.

[@trompae.a.7124]

The price is that spray machine

[@achebe171]

I know its expensive but have a sprayer for any non waterborne finishes and one for waterborne. That's what i do with sprayers and my hvlp too. And honestly waterborne is so good and for the most part easier to use that it hust makes sense to only use waterbase stuff... so just maoe sure you rinse with plenty of water amd if you want extra protection use pro clean pr lacquer cleaner from sherwin williams then rinse more with water. And remeber the tips do have a life of a few hundred gallons.

[@mikedkc]

Great job. No useless background music, just a clear, concise demonstration. Thank you! Subbed.

[@Caliber8Tools]

Glad it helped.

[@JGFowler121]

Awesome detailed explanation!!! You crushed it, best one I have seen to date. The tempo of the lesson was perfect 🥇🏆

[@Caliber8Tools]

Thank you. Glad it helped.

[@danielcielmaee3642]

Definently. The cadence you speak at is very easy to follow and understand.

[@darrellroireau4061]

Best instructional on these sprayers I've seen yet.

[@Caliber8Tools]

Glad it helped.

[@johntate8989]

Fantastic job! Thanks so much! I’m much more confident after watching this video. Others haven’t been as concise. Thanks again and bravo!

[@Caliber8Tools]

Glad it helped. Thank you.

[@earthangel428]

Agree wish I had found this before watching so many other videos

[@markwatson2006]

Caliber 8: Where have you been for all of my DIY stuff?!? Great instructions!

[@Caliber8Tools]

Glad to help.

[@RB-hj7qc]

Excellent explanation with perfect camera angles that let me see everything clearly. If there's one thing people don't do right is the camera angles and lighting. Makes such a big difference to the video quality. Now I feel much more confident using my new sprayer.

[@Caliber8Tools]

Glad it was helpful to you.

[@jessicaconfessions]

Agreed! Very well done video

[@kenwalsh686]

It’s been a while since I used my sprayer so I had to rewatch this video. Still awesome and super helpful. Thanks for posting this video!!

[@Caliber8Tools]

Thank you. Glad it helped.

[@Frrrrrunkus]

Great video Man. So descriptive and thorough. You’ve given us confidence to purchase a paint sprayer.

[@Caliber8Tools]

Glad it helped

[@TheSmidence1]

my brother loaned me his graco and lemme tell you I was intimidated til I watched this video. Just tackled my home exterior. 10/10 video.

[@Caliber8Tools]

That’s right. Glad it helped.

[@bluesbrother2383]

It's amazing that Sen Dogg from Cypress Hill is doing paint sprayer tutorials lol

[@dennissorensen8765]

...and would you imagine that this part of his work is not even mentioned on his Wiki-page?!? 🤦🏻‍♂️ 😄

[@josem971]

@@dennissorensen8765 P I

[@Witchdoctor39]

Wakanda meets Graco😃

[@beetee801]

Lmao. This had me on the floor.

[@paulstrawbridge5687]

Had no idea thats who he is...but when you've been in the remodeling game for awhile you may find that the most herb-tokin dudes at the job are the paint crew...haha, so to me it adds up. Ha.

[@frankwalen7236]

Watched several videos. Just bought this sprayer. Your instructions exceeded ,all the other videos combined. I'm a GC & am making a couple of my workers watch this video in the morning. Compliments. Very thorough & EXCELLENT VIDEO. SUBSCRIBED!

[@Caliber8Tools]

Glad it helped.

[@frankiero2367]

What a great breakdown. Very easy to follow. "Thank you" for the step by step details.

[@Caliber8Tools]

Glad it helped.

[@raydavis4446]

I've watched alot of videos about this topic. Everyone forgets to tell or show you something. This is the most comprehensive video I've see. Craco definitely should give you a job

[@Caliber8Tools]

Glad it helped.

[@retf054ewte3]

perfect video: he talks clearly, slowly, no rush, no background shitty music. 👍

[@desigamingworld2565]

One of the best video I have watched about paint sprayer that’s how you explain to the beginners heads off to you boss, deep and attention to details. Not everyone can explain like this only the smart ones. Thank you.

[@Caliber8Tools]

Thank you. Glad it helped.

[@ChrisNieves]

Great video for setup, priming and cleaning. You should’ve touched little more about the spraying part and adjusting your pressure even just for the normal 515 tip after the priming section. Some folks may just use your video and have spray problems because they are still in start.

[@Caliber8Tools]

Thanks

[@Dakingsnake]

This is the most thorough and comprehensive KZbin tutorial I’ve ever seen. Saving this for when i buy my x5 tomorrow

[@Caliber8Tools]

Thank you glad it helped.

[@larrymitchell1628]

Good video overall. The guard on the gun develops the spray “fan” pattern, depending on its orientation. The hose end valve supplied is designed to facilitate using water to flush out the system once done painting, versus running the pump. I find that flushing with water does a good job of clean up except for the tip and guard, as well the inlet screen. I find that using a a portion of discard panty hose, secured by a nylon tie strap over the inlet screen eliminates a lot of sprayer issues due to dirt or debris. Thanks for your good good effort.

[@Caliber8Tools]

Great tips thanks.

[@AncoraImparoPiper]

The clearest and concise instructional video on this sprayer I've seen so far. Thanks for sharing!

[@Caliber8Tools]

Thank you. Glad it helped.

[@billnope7840]

Good video until you started spraying the wrong direction. The spray gun has a fan of about 10 inches wide. You make you passes the OPPOSITE direction of the fan. Your initial hand passes should have been up and down, NOT left to right.

[@TheeAnonymousTrader]

😂 I was disappointed as well

[@neiltrenholm2949]

Can you explain more

[@billnope7840]

@@neiltrenholm2949 The spray gun sprays the paint in a very narrow rectangular area, say 1 inch tall and 10-12 inches wide, depending on the angle that one holds the sprayer. One could hold the gun such that the rectangle is 10-12 inches tall and 1 inch wide. Typically one holds the gun so that the rectangle is more wide than tall and the movement of the gun is up or down, usually down. This covers a large area quickly. One could hold the gun such that the rectangle is more tall than wide and THEN the movement would be left or right so that the covered area again is large. In this last example, one would NOT move up or down. That would result in a very small area covered with FAR too much paint and almost certainly result in dripping.

[@VinnyVentures]

@@billnope7840 great video just noticed the guard was facing up instead of sideways hence why your spray direction was horizontal not vertical

[@whatfreedom7]

I borrowed one of these from a friend. I thought it was easy to use even for me never having used one before. I had great results on my paint project. Just make sure you flush it out and put the treatment in it when you’re done.

[@PsilliPig]

Totally thorough DYI instruction. Clear, step by step to keep me from getting lost in the product manual and losing interest. I've painted houses inside and out many times, and was wondering if it wouldn't be a better idea to go with a sprayer and the answer is yeah. LOTS better. Thanks so much?

[@Caliber8Tools]

You’re welcome. Glad it helped.

[@InsanePandaWanderer]

Thank you for the good explanation. I used to work in apartments and our make ready guy would always have trouble with this machine. He never cleaned it properly and it would always clog up, I still remember him kicking the machine in frustration losing his mind. I only had to watch this video to learn more than he ever knew.

[@Caliber8Tools]

Lol. Glad it helped.

[@lynetteyoung9777]

Your explanation was perfectly thorough. Your voice was clear and easily heard. Thank you.

[@Caliber8Tools]

Glad it helped. Appreciate the feedback thank you.

[@jessicahyman6011]

I absolutely love this instructional video. He explained everything so precise and I am officially ready to try my new sprayer! Thank you so much for taking the time to make this video for our understanding. 😊

[@Caliber8Tools]

So glad it helped.

[@JC-lf8pr]

Absolutely the best X5 paint sprayer video for newbies! Thank You!

[@Caliber8Tools]

Yeah for sure.

[@tonyvarse7856]

I'm a newbie and I just bought this spray gun. I did a quick KZbin and found this video. If I could give you 10 thousand likes I would. This is probably the best "How to" video ever!!

[@Caliber8Tools]

Many thanks. Glad it helped.

[@theoldieswarehousegk1089]

This was one of the finest how-to explanations I have ever seen. Well done !!!

[@Caliber8Tools]

Appreciate the feeback. Thank you. Glad it helped.

[@roborracle]

One of the best vids I've seen on how to do something. OUTSTANDING.

[@Caliber8Tools]

Appreciate that. Glad it helped.

[@mbruce4152]

nicely done. I'm going to save this video and watch it again right before I start. very efficient explanations, no wasted time watching this vid.

[@Caliber8Tools]

Glad it helped. Thank you.

[@robflorez4657]

Thanks for this video. Just got this sprayer and this is the clearest explanation I’ve found yet on how to use it.

[@Caliber8Tools]

You’re welcome. Glad it helped.

[@rebelgrunwald]

I have the X5 but have not used it for a while. This was a great refresher explanation in a very simple form. Great job!

[@Caliber8Tools]

Glad it helped.

[@playoutthebox]

Greatest video on KZbin on paint sprayers. Good job.

[@Caliber8Tools]

Appreciate that. Glad it helped.

[@greggardner2042]

I just bought this sprayer! Thank you for a thorough detailed explanation. I am more confident going forward. Thank you!!

[@Caliber8Tools]

You’re welcome. Glad it helped.

[@greggardner2042]

@@Caliber8Tools Quick question, that “nut” assembly for the spray guard, how much do you need to tighten it? It seems like hand tight, but I want to be sure. I checked the book and it did not address it.

[@synchronisticmelanatedmysitic]

Best Video on paint sprayers on KZbin

[@scottviola6844]

You did a great job! I feel confident using my paint sprayer now. Thanks

[@Caliber8Tools]

Glad it helped.

[@patrickshoe489]

Concise instructions and excellent step-by-step instruction. I'm new at this and because this video is go good, I'll be watching and doing at the same time.

[@Caliber8Tools]

Glad it helped.

[@jourijackson4324]

Thank you, this was extremely helpful. my dad got one never used it, now I’m feeling pretty confident to use it myself

[@Caliber8Tools]

Glad it helped. You got this.

[@send2karthi]

Very clear and the sequences of steps are easy to follow. Thanks for the video.

[@Caliber8Tools]

You’re welcome. Glad it helped

[@jsmythib]

Bought it. $279.00 Prepped on the info here. Thankyou! Sprayed a complete 2br apartment, all rooms, ceilings,walls,kitch,bath,dn, one color...in less than 2 hours(8'ish gallons)....It payed for itself on the first job. With standard home depo white it can lay on enough paint to drip quickly if your dont keep moving. I can also quickly roll out a wall after spraying if I need to and its wet enough. Cant say enough good things about it. Priming and cleaning, also easy. My first time spraying anything other than a paint can.

[@Caliber8Tools]

Great job. Glad it helped.

[@derrickpatrick1206]

Thanks for the refresher course. Good explaining on the details for the Graco X5,

[@Caliber8Tools]

No problem. Glad it helped.

[@DavidHopp-c9f]

Great step by step explanation! No small talk. Thanks for the video

[@Caliber8Tools]

Glad it helped.

[@johntorre1213]

Thank you, this explanation couldn't be more clear. Excellent video, you made me buy this sprayer.

[@Caliber8Tools]

Glad it helped. Thank you.

[@itsjiraheta]

Thanks for the time and effort put into this video. I can tell you were doing both the filming and the manuvers. It takes a lot of effort. Kuddos to you my friend.

[@Caliber8Tools]

Appreciate the feedback. Thank you.

[@curtdogwinslow3517]

Have to say you were very thorough except as to what to do with the hose . Enjoyed your video thanks

[@Caliber8Tools]

Glad it helped.

[@marklpc]

Thanks! Very helpful.

[@Caliber8Tools]

Thank you. Glad it helped.

[@lillithjones993]

Thank you for the video. I have used my Magnum 5 before but it’s been a few years and I forgot what to do so you’re helping me remember

[@Caliber8Tools]

Glad it helped.

[@maui2erika]

This is the best instructional video yet!!

[@Caliber8Tools]

Appreciate you. Glad it helped.

[@DavidMcMinoway]

Thank you sir!! This has to be the best and easiest to understand tutorial on how to use this spray gun.

[@Caliber8Tools]

Glad it helped. You’re welcome.

[@paulhumpal8015]

I bought this spray gun last year but have been intimidated by it. Thanks for the video. I will be finally using it next week to spray the interior of a 2100 sq ft house. Super explanation!! Blessing to you!

[@Caliber8Tools]

Glad it helped.

[@gurkgurb1375]

Excellent...thank you, this was by far the most informative and easiest to follow video on the x5...

[@Caliber8Tools]

Appreciate the feedback glad it helped.

[@j3rocketeer]

Thank you for a great instructional video

[@Caliber8Tools]

Glad it helped.

[@myohmy111]

Excellent step by step verbal, and video camera integrated tutorial!!!!

[@Caliber8Tools]

Glad it helped.

[@ChubbyUnicorn]

very happy I saw your video. there is A LOT mote to operating this machine than I could have intuitively figured out. clear, concise instructions.

[@Caliber8Tools]

Glad to hear it.

[@edwardpietrouski5039]

Best explanation on how touse the graco x5 sprayer.

[@Caliber8Tools]

Glad it helped.

[@bivensrk]

Ha! "Make sure that guard is tight and firm and secure" HOLY CRAP the results if that step is messed with WHILE painting. I had seen in the "Quick Start Guide" that the guard alignment could be changed for vertical/horizontal strokes. BUT I had not really paid close attention to that part of your instructions. First time using the sprayer, primer *all* over the place. BUT at least it was primer. I proceeded to manually spread it via brush, so all wasn't lost!

[@Caliber8Tools]

Glad it helped.

[@speedyali764]

Very good , quick start tutorial, I felt ready to give it a try instantly.

[@Caliber8Tools]

Glad it helped.

[@natejenkins786]

Greatly appreciated, I've had my sprayer for 2 years and frankly I was afraid to mess it up or waste a lot of paint, but I think I'm now ready to paint my kitchen cabinets.

[@Caliber8Tools]

Glad it helped.

[@Anticrap-b1e]

EXCELLENT! Best Tutorial I have seen> Graco should hire you immediately!!!!!!

[@Caliber8Tools]

Appreciate the kind words. Glad it helped.

[@josephljackson753]

The best presentation yet, , I purchased the X-7model

[@Caliber8Tools]

Thank you. Glad it helped.

[@cherylbrown5880]

This was a really great video. Voice very clear and could see everything perfectly. I feel very confident now that I can use the paint sprayer.

[@Caliber8Tools]

Glad it helped.

[@mosaicolu]

thanks for the easy demonstration of the air paint sprayer

[@Caliber8Tools]

No problem, glad it helped.

[@edge2science]

Thank you for your straight forward and clearly spoken tutorial. Easy to follow great job!

[@Caliber8Tools]

You’re welcome. Glad it helped.

[@andytiner7989]

Great video brother ty for your time of explaining. I to have same sprayer I use on customers homes although I don't use every single day due to other jobs there are times where I forget sum of procedures on set up your video is a game changer for me easy quick and straight to the point ✌️✌️✌️

[@Caliber8Tools]

Glad it helped. Appreciate what you do.

[@rodney2812]

Good stuff, thanks for taking the time to put it together and offering thorough explanations and important tips.

[@Caliber8Tools]

You’re welcome. Glad it helped.

[@johnclowes3894]

Great vid bruv. Easy to follow and close ups spot on. One thing I was told by a sprayer was he cleans his sprayer by putting hose in either a bucket of clean soapy water or turps/white spirit and flushed it through till only clean water or white spirit come out. Apparently it’s a lot quicker and without risk of loosing parts or damaging them. I’m a roller and brush guy myself. Old school as you say so what do I know.

[@Caliber8Tools]

He’s right. Glad it helped.

[@zlatkonanev]

Good chance this is the best tutorial video on KZbin on this topic

[@Caliber8Tools]

Appreciate that. Glad it helped.

[@SteveBellefontaine]

Great Video...Thank You....I just bought one of these off Amazon. Waiting on delivery so Figured I get a head start and research it and the operation of it.....cheers

[@Caliber8Tools]

Thank you. Glad it helped.

[@DevBone42]

Excellent video! Simple, but detailed, step by step logical progression of info on the use of this machine. Much appreciate your time in putting this video together!

[@Caliber8Tools]

Appreciate the feedback. Glad it helped.

[@MichaelSmith-kr9qw]

May I add 1 small thing. While cleaning your spray gun afterwards make sure you do it with a strainer in your sink or bucket, the reason I say this Is I accidentally dislodged the tip seal down the sink drain it went and had to spend another $11 on a new one...While I was there I went ahead about bought another 515 Spray Tip as well just as a precaution. Awesome Machine I will back spraying our Master Bedroom after spending two weeks installing new flooring and updating the master bath as well.

[@Caliber8Tools]

Thank you for that tip.

[@hospitaladministrator3359]

Thank you for this super thorough video. I feel like I actually know how this thing works now. Great instruction.

[@Caliber8Tools]

You’re welcome. Glad it helped

[@JayBeaSea]

Thanks for the no-nonsense instructions! Great job, and much appreciated.

[@Caliber8Tools]

No prob. Glad it helped.