Рет қаралды 7,846
PART 1 of our Introduction to Coldworking Demo: How to Use the Beltsander. This demonstration focuses on aspects of safe and effective sanding to remove the broken edge of the neck line on a "snowperson" or caterpillar of solid glass and take it to "Prepolish" on the Cork belt. Proper sanding and polishing can smooth this edge to be as round and shiny as the hot-polished end. Be sure carefully follow the order of belts: 80, 120, 220, 400, 600 and Cork, taking care to fully remove each grit with the next belt. Marking the sanded surface with a permanent marker can help you track when you have worked the entire surface so you don't miss any areas.
0:00 Introduction
0:39 Coldshop Safety Talk
5:00 Belt-Sander Intro & Safety
9:22 Step-By-Step Grinding & Shaping
18:44 Safety Reminders & Other Tips
PART 2: How to Use the Polishing Lathe for Glass: • How to Use the Polishi...
Demonstrated by Professor Davin Ebanks at Kent State University.