How to use an impulse sealer the correct and efficient way. No cutter or fancy tools necessary.
Пікірлер: 93
@journeystorm85855 жыл бұрын
I sure appreciate people like you that will take your precious time out (Yes, our time is so precious in this journey) to help people learn the right way to do things. So happy I found your video. Thank You so much for caring! God Bless You!
@realarccos8 жыл бұрын
This was extremely helpful, thank you! It's nice to see someone with the correct technical knowledge and experience sharing information about the correct use of sealers. This technique is extremely helpful when you're using rolls of poly instead of bags, because it allows you to re-open the side closest to the roll without cutting.
@TropicalRedFlower2 жыл бұрын
This is the video I needed! Thank you so much, I was tearing it up from the product side and getting a thin seal and pulling it while hot which gave me ugly melted edges. This saves a lot of time and the bag looks professional. 🤗
@petermuller69236 жыл бұрын
WOW, you SAVED me a lot of MONEY. THANK YOU! I was planning to buy one of these very expensive heat sealers with a cutter, because i will have to make hundeds of bags per month out of tube sheet for my online shop and seal them with the items inside too. I have been using scissors and hated it. Takes so much time and looks terrible... Now i tried your method on my 40 bucks 400 mm cheapo sealer and it works perfectly. The seams get absolutely perfect. It looks very professional and saves so much time in comparison to the damn cutter if i had one and even much more in comparison to the scissors. Cool :) You can also make two bags out of one in a few seconds. Seal the bag in the middle or where you want to separate it, tear away one side. Now you have one bag finished. The other one has a weak seem. You only have to seal the outer border of this and it will be perfect too. For fun i already made air pillows from cheap foil for packaging on my own with an electric blower and the heat sealer. That works well.
@kxydn63636 жыл бұрын
Excellent Video, very informative! Your method definitely will save me time and money the next time I use the Uline Impulse Sealer. Thank you!
@alteredLori6 жыл бұрын
thank you i just got one and now you showed me how to use it properly! Thank you for your time and knowledge!
@Sooz31126 жыл бұрын
I didn't know that! That's great advice, thank you. I had also been contemplating buying a cutter or not, but unless it's really thick shrink wrap - I've never seen any other soapers use the cutting functionality. Kind regards, Su x
@TravisDoodles7 жыл бұрын
you just saved me $200 for not getting a cutter, thank you!
@w62632 жыл бұрын
Thank you for this video. As shops seem to do this a lot. The item you purchase is in a flimsy sealed bag and opens so easy.
@ChrisFredriksson7 жыл бұрын
Beautiful! Just bought a machine and searching around for ideas, this video gave me a great tip! =)
@Karieeeeeee3 жыл бұрын
This is awesome! I have been thinking I had a defective sealer. I never thought of pulling from the other side. Thank u so much! It looks so beautiful now!!!
@ClaytonDarwin3 жыл бұрын
Thanks. Just what I was looking for. Practical advice.
@plantaction5676 жыл бұрын
Thank you so much for your tips!! 😃🙏🏼❤️
@jonpfiester91326 жыл бұрын
Thanks for this video man! Very helpful
@imokia035 жыл бұрын
Thank you, you made it so much easier
@joshuae6687 жыл бұрын
Great advice. Thanks
@NoMoneyG6 жыл бұрын
Great Vid!! Thanks for the tip!!
@jungsomewhat2 жыл бұрын
The most concise information thank you ..
@Yarrney6 жыл бұрын
Very informative. Thank you
@marcieknight20036 жыл бұрын
Very nice. I just started for soap making and am having trouble keeping it clean because I also have to use a heating gun after
@michaelraimondi25346 жыл бұрын
Excellent video, thank you for sharing your thoughts and instructions.
@samihameedАй бұрын
Great video! Thanks for sharing
@behumanbekind2 жыл бұрын
Great video, thank you.
@lutwamaumar17867 жыл бұрын
Thanks ,it was really helpful
@radevent14 жыл бұрын
Thank you, helpful information.
@chametralashae65185 жыл бұрын
Thanks for the tips!!!!!
@Geogak Жыл бұрын
SO happy I watched this, almost blew $300 on a sealer with a cutter.
@SherazManzoorOfficial4 жыл бұрын
very well explained...thanks
@kiaypp6 жыл бұрын
Brilliant!! thanks
@Cali-Girl4 жыл бұрын
How do you keep the teflon strip clean without damaging it?
@tedsamuels32032 жыл бұрын
I think 🤔 this video was very helpful. THANKS
@assafbinfuad45263 ай бұрын
Thanks very useful video 😊
@alexkastano96 Жыл бұрын
good tip for beginners ,just got this machine , using it to store family damn expensive cashmere sweaters for the 9month of the year :))
@theurbanghost3 жыл бұрын
Perfect thank you!
@foodiebyme7762 жыл бұрын
Thank you for sharing
@oasispromosteam30124 жыл бұрын
Very nice!
@Sufficient4UsIsAllah2 жыл бұрын
Great tips! Which heat sealer are using? Thank you.
@EdvanioSilva Жыл бұрын
Thanks so much!
@bspeakman51026 жыл бұрын
Thx good tips to know.:)
@graham-jefferson3 жыл бұрын
Could you use this for clear or tinted marine vinyl? Would it get hot enough to seal two 0.75mm pieces together securely?
@DonOfGoldOfficial7 жыл бұрын
Been searching for the right way to seal like a lot. Thank Allah ur video pop up and it's totally helpful. Thanks man. God bless u
@scaylabs7 жыл бұрын
Hi, I was wondering what machine you're using in this video. Thx!
@tomallen1007 жыл бұрын
awesome thanks!
@lorigoedken81492 жыл бұрын
Thank you so much! My bag tends to stick to the top. Am I doing something wrong?
@damkayaker6 жыл бұрын
I have the same box cutter. Tell me if the fumes from this device would cause discomfort in a non-smoker.
@purrLily4 жыл бұрын
hey is it fine to always maximize the temperature of the sealing machine? if the temperature adjustment goes from 0 to 8, is it okay for the machine to be set on 8 all the time? thank you :))
@DavidLopez-dr1eq6 жыл бұрын
Can it be used to seal nylon bags for Tattoo grips
@rashiksingh88805 жыл бұрын
Very nice
@JettBreedlove4 жыл бұрын
Hi! Awesome vidoe!!! Quick question: What is your heating setting temperature dial set to?
@the12makeit2 жыл бұрын
Do you have to buy the special bags for this machine or can I buy any plastic bags like bread bags or sandwich bags?
@fawnwolfe73555 жыл бұрын
Can you use it to put a steak down the middle of a page protector making a page protectors with two pouches?
@360-gamer572 ай бұрын
What was the setting you used for the bag to be opened easily by hand? Also thx for making this video to make the instructions clear
@journeystorm85855 жыл бұрын
I do have a question that I am not understanding.. My heat know is 1 - 8... how do I know what heat setting? I am using thin "Shrink Wrap Poly Bags" - Thank You so much.
@Maria-ur983 жыл бұрын
Hi! What’s the brand and model of the impulse sealer you are using in the video? Thanks!
@christinenchua73744 жыл бұрын
Can thermal sealer be used in bubblewrap?
@kkatzvegankitchen3 жыл бұрын
What is the knob setting at ...what # ...lol ...thank you for sharing
@ajay4i3 жыл бұрын
What is the sealing thickness of your machine. As here we get 1mm, 2mm, and 3mm thick sealing machines.
@hongkongcar6854 жыл бұрын
Sir we use for water?
@jennalen79222 жыл бұрын
Hi, thanks for the video! I repeated your video, now I got mine from Amazon. But there's an issue, please help me. I tried to tear off the extra shrink bag, but it never worked. So I heated 2 or 3 times, but it wasn't tear off. Sometimes it hardly could be tear off or just ripped. Is this the defect of my machine? Do you think I need to refund this machine?
@sportsroses7 жыл бұрын
Thanks. I won't pay extra to buy a sealer with a cutter now.
@bmed9072 жыл бұрын
Where do you get the plastic bags from?
@zhoulu15112 жыл бұрын
what heat setting were you at?
@trext8882 жыл бұрын
Hi, can i use this to seal polymailer?
@phillhuddleston94453 жыл бұрын
Great explanation, this is a simple device but I just watched a video of someone showing the wrong way to do it with a weak seal, now how will you open your product since you just sealed your knife in the bag :)
@lynxian-60972 жыл бұрын
buy a new knife 😂
@vinodsinghparmar32727 жыл бұрын
Good
@remnantsrita182 жыл бұрын
Hi does your machine make a noise I just bought one and the sound is strange and the smell?
@faridahmed97344 жыл бұрын
How much price this machine ?
@Degod4132 ай бұрын
Thanks can you reuse the excess piece?
@adamk15202 жыл бұрын
Are you using a ULINE sealer? I purchased a different sealer off of Amazon without cutter, and the bag would not cut away once sealed. I'm now looking at the ULINE brand.
@erikadacanay27666 жыл бұрын
how much is that
@NikitaLab8 жыл бұрын
doing the opposite where the excess contains the thicker seal makes shrink wrapped products look a lot better.
@petermuller69236 жыл бұрын
And then, you or your customer can open these without tools. That's really nice :)
@jay45730 Жыл бұрын
I just bought one used it today, wrapped 9 lil boxes and it stopped working. Light turns on but it doesn't heat
@sophialewis99864 жыл бұрын
Anyone here know how I can seal multi products on a plastic strip....like how old time lollipops used to come in a strip? Seemed to me they were enclosed on a long piece of plastic and then just sealed between each one. In other words, I'd like say 5 sweeties on on strip, but separated by a seal for each (you'd have to cut each one off). Can this machine do this?
@AydenSchofield4 жыл бұрын
Did you call scissors fancy tools in the description?
@achillesglacia7700 Жыл бұрын
How to turn it on
@ozarad62638 жыл бұрын
wooooooow
@sheewinorate55532 жыл бұрын
San nabibili ng blade
@internationalpug13186 жыл бұрын
Get a roll of paper, then use as you go.... Less waste, an right size every time!
@K1KO2476 жыл бұрын
Were can I order those bags
@richardsunday16126 жыл бұрын
aliexpress
@user-ih9mc6tc1k7 ай бұрын
Send me link
@tinashahparast8 ай бұрын
👺
@zahrakajee32243 жыл бұрын
Omg get to the POINT!!
@sanjuansteve2 ай бұрын
Hi there! I'm in the process of packaging a new food product using a heat sealer, but I'm having trouble getting the sealed line to be wide enough for my needs. I'm currently using a basic model and the seal line is only 1-2 mm wide, a very thin line, and even on the lowest setting, it melts through the plastic too quickly, resulting in an untrustworthy seal. I've considered using a non-stick barrier like Teflon to help spread the heat more evenly, but I'm not sure where to find it or what thickness would be best. Do you have any suggestions or tips on how to achieve a wider seal and one that burns through less quickly with my heat sealer? Any advice would be greatly appreciated! Thanks in advance!