How To Use Catalyst Browse - Tutorial and Download Sample

**Note: TURN OFF all stabilization in camera when using Catalyst browse.
**Note 2 - I originally uploaded the wrong file - the proper file is available now.
I provide a free downloadable clip so that you can try the powerful catalyst browse software for yourself. I give a brief explanation of the pros and cons and a tutorial on how to use the free software.
Here is the clip you can download (CORRECT ONE THIS TIME 🤣)
drive.google.com/file/d/1gueT...
Sony Catalyst Link:
www.sonycreativesoftware.com/...
Possible fix for light flicker:
• Fix VIDEO FLICKER in 3...
The cameras that currently support the Catalyst Browse feature
RX0 II, ZV1, ZV-E10, A7C, A7IV, A7SIII, FX3, A1
ZV-E10 (Affiliate): Amazon: geni.us/zv-e10 B&H bhpho.to/30pNQJy
Best Lenses
Sigma 16mm F1.4 Amazon: geni.us/W2SB B&H: bhpho.to/3z7S2KD
Sigma 30mm F1.4 Amazon: geni.us/sigma-30 B&H: bhpho.to/3jJLuwt
Sigma 56mm F1.4 Amazon: geni.us/Sigm5 B&H: bhpho.to/3cdhHHM
0:00 Intro and example
1:35 Cons
3:06 Example of Catalyst Footage at 1/200
8:32 Final Cut vs Catalyst Browse Stabilization
8:52 Rolling Shutter Test
9:23 Olympus or Panasonic as alternatives
10:00 Catalyst workflow
17:05 Gimbal problems
17:30 Conclusion
Artlist (2 Free Months): bit.ly/2VxjPpi
Artgrid (2 Free Months) bit.ly/3A0vAn8
Did you read until the end?? You're a damn hero
Contact: [e-mail]
#catalyst #sony #stabilization

[@MarkBennettCameraCrisis]

**Note: TURN OFF all stabilization in camera when using Catalyst Browse

[@davegarciajr191]

just wanna ask after stabilize my video in catalyst browse can I use my stabilize video to premiere pro to my work flow instead using warp stabilizer?

[@adapopowicz7585]

Hi Mark! So both Steady Shots (3rd and 5th pages of second settings card) have to be turned off? Or is there anything else to disable?

[@MarkBennettCameraCrisis]

@@adapopowicz7585 Just the one on the third page is necessary - that’s for video. It’ll be quicker if you use the Fn button on the back of your camera. Click that and you’ll see stabilization in bottom left corner of the screen (if you’re using the ZV-E10)

[@adapopowicz7585]

@@MarkBennettCameraCrisis Thank you! Turned off and ready to go!

[@namelessfrce5842]

yup forgot to do that with my test footage still came out quite well gonna do another test run with image stabilization off

[@thefilmalliance]

Finally - a clear and concise tutorial on how to use this software. I feel like I never get a straight answer from others but you sir, do it every time. Thank you!!

[@MarkBennettCameraCrisis]

Thanks!! I try, my man. I try 🤣🤣

[@pianopotato]

I was at the museum filming my two young kids running around. Saw somebody else using another camera brand filming his kids with a gimbal. I respect his dedication but for me, I whip out my A7IV or ZV1, film the kids and their mayhem without a worry in the world, come home, and stabilise my videos in catalyst browse. My wife thinks they look epic with the smooth buttery gimbal like results. Thanks Mark for your great videos!

[@MarkBennettCameraCrisis]

catalyst browse is a definite advantage

[@mynameisjimbo]

This is so much information and entertainment at the same time. Thanks for being you Mark!🙏🏼

[@MarkBennettCameraCrisis]

I appreciate that!

[@maxsteez]

@@MarkBennettCameraCrisis Yeah you're a G bud 😎👊

Thank you for the sample footage 🙏 The camera settings for this example are spot on 👍 Really appreciate it a lot. Thanks again and keep coming with great stuff like this 😉

[@MarkBennettCameraCrisis]

You're welcome!! Glad it was of use.

[@zouhairbenazzouz2536]

I love your content so much plus you holding a beer and talking to us remove all the protocol habits and just feel like a passionate bro is sharing a tip with another !

[@MarkBennettCameraCrisis]

I appreciate that - that’s how I feel about it too - just hanging out!!

[@FunWithTheBugs]

Nice overview of the the software. Like you mentioned, having to raise the shutter speed that high to use the software correctly will definitely require good lighting. Always entertaining to watch.

[@MarkBennettCameraCrisis]

Appreciate it 👍👍

[@Brucelabvideos]

I've been playing with Catalyst Browse (per your spot-on guidance and tutorial) and I gotta say, it's a pretty slick tool. I found it incredibly simple and most definitely has its place in my list of options for various applications. Thanks Mark.

[@MarkBennettCameraCrisis]

Yes - I think if more people tried it - I think they’d like it

[@FrancescaDePaolis]

That was very helpful, clear and straight to the point! Thank you so much!

[@manohasmodernlife]

Love this software and I will understand it even better in a few minutes thanks to you!

[@CodyCoates]

New to this camera... and like... using a camera in general... this is insane how well it works. Thanks for making me aware of the software, and for showing the tutorial. You just saved a bunch of stuff I had shot!

[@MarkBennettCameraCrisis]

Glad it was helpful!!

[@imkavindu]

You're the best! Just got my zv-e10. And I learned a lot from you.

[@andrewhuang7632]

Thank you so much for doing this tutorial, today I was just discussing this with my friend. Awesome work, keep it up.

[@MarkBennettCameraCrisis]

You're very welcome!! 👍

[@thomasoreilly6140]

Mark, this is so helpful! Thank you so much for explaining how Catalyst Browse works.

[@MarkBennettCameraCrisis]

Glad it was useful!!

[@agudal8503]

The only usefu video about this subject that I found, and I like your style. Subscribed. Thanks!

[@MarkBennettCameraCrisis]

Awesome, thank you!

[@DiegoFuerte]

Bro thanks for this video, i just downloaded the sample which was very useful since i just ordered my ZVe10, but now im comparing rendering times between my gaming pc and my macbook pro. Once again you do not miss with these very well executed informative and wholesome videos. Subbed for life

[@MarkBennettCameraCrisis]

Awesome - thanks!!

[@TheSuperHeroOfLove]

Awesome Video Mark! Really appreciate this alot! Saved to one of my playlist of learning!

[@AllThingsFilm1]

Excellent video. I didn't even know about the trimming feature in Catalyst Browse. Thanks for mentioning that. I knew you'd come through with something fancy.

[@MarkBennettCameraCrisis]

I’m a fancy boy!!

[@I922sParkCir]

One pretty significant issue with Catalyst Browse is it strips the EXIF data. Thank you for the videos, they're great!

[@enigmascape]

this was very helpful, thank you for this! I honestly had not even TRIED to film anything with my lil dougie because I knew it sucked, so being able to play with your clip made me see that its not THAT big of deal to process stuff through this... kind of a hassle but not too bad.

[@fmj_556]

I just picked up the a7c a couple of weeks ago. Thanks for the video!!!

[@MarkBennettCameraCrisis]

Good choice!

[@YaYousef5]

Thanks so much for a thorough overview and tutorial on how to use this software. I have an A7C and tested Catalyst Browse vs Davinci Resolve stabilization on a number of walking and talking vlog videos. Catalyst Browse has better stabilization thanks to the gyro data and I think it's pretty amazing, but, I feel like the Resolve stabilization is 80-90% similar, while also having a much faster workflow. I do notice some wobbly corners with Resolve's stabilizer, but for a vlog style video, no one's really going to notice. It's awesome we have this option from Sony, though!

[@babybonesxd4810]

This is exactly what I needed to know about catalyst browse. Only note is I had to restart the computer after installing cause catalyst was using wingdings has its language of choice.

[@gabbyydream3378]

THANK YOU! I am a new subscriber from Switzerland and I love your videos, your humor, your style, your professionalism! Thanks to your videos, I got the sony zve10 and I'm starting to test and play with it a bit by watching your videos. You are so professional, you should do a special zve10 course online. Anyway, I would buy it! Thanks again for all the quality sharing and I can only tell you that your image quality is fantastic!!!

[@MarkBennettCameraCrisis]

ha - I AM working on a ZV-E10 course. At least I know one person will watch it 🤣

[@Sim1Designs]

I would too 🙋🏽‍♀️

[@noahscofield]

Just got the ZV-E10!! I can’t wait to play with it!!!

[@MarkBennettCameraCrisis]

It’s so good

[@joshuaaruiz]

the very best I've seen on how to use catalyst browse ! great video

[@MarkBennettCameraCrisis]

Thanks - I appreciate that!!

[@WeTheKims]

Hey Mark. I really appreciate all the great information on the ZV-E10 you put out there. I have a question about how Catalyst Stabilization works. If you brought in squished anamorphic footage (looks like Moment is developing an anamorphic adapter to work with existing lenses, which means if the existing lens has AF, there would be gyro meta data recorded as well) into Catalyst Browse, do you think it'll do a good job of stabilizing it and look normal after unsquishing the anamorphic footage?

[@markjodonohue]

While I found the first half of the video informative and helpful, I thoroughly enjoyed when you got on the computer. You're very funny and I enjoyed your more off the cuff style! Thanks for the video, definitely subscribing.

[@MarkBennettCameraCrisis]

I appreciate that!!

[@AnthonyADurante]

Thanks for the sample video to test Catalyst Browse with. It took about 4 minutes to render on an Apple M1 Mac Studio w/ 32 GB RAM.

[@MarkBennettCameraCrisis]

Thanks for the info!!

[@voxelraptor213]

@@MarkBennettCameraCrisis Sony's site says Catalyst is for Intel based processors only which sucks. Your clip takes about 6 minutes on my mac Mini M1. I was going to sell my Fuji gear and move over to Sony. Not so sure now:(

[@udipta21]

You are the best reviewer, and naturally very entertaining

[@MarkBennettCameraCrisis]

Thanks!!

[@TheTMax]

I've been looking for a comparison of Final Cut Pro vs Catalyst Browse and you, sir, made my wish come true! Thanks for that! I'm now convinced to use Catalyst Browse.... until I get a gimbal😏

[@MarkBennettCameraCrisis]

It is quite fantastic

[@ekateguhpribadi7540]

Nice info! Gonna try catalyst browse first Thanks!

[@Burzcasts]

A small gimbal like the Crane M2 is perfect with the ZV-E10. No crop, no need to fiddle with frame-rates. No artifacts in video.

[@MarkBennettCameraCrisis]

I have the Crane M1 and you’re right - I just hate carrying a gimbal 🤣🤣

[@KPGuitarStudios]

Hey Mark, the results are amazing! I mean... the hair is amazing so therefore the results are amazing! :) Catalyst browse does definitely work great. New videos should be realistic on my end in the next couple of weeks... excited!

[@MarkBennettCameraCrisis]

I’ll be watching - I’ll tie my hair back to be able to see!! 🤣

[@KPGuitarStudios]

@@MarkBennettCameraCrisis I've got a look for radio man, probably better to keep the hair in the way haha

[@satonobre]

thats advanced and very useful, thanks!

[@LloydEvaroa]

Just watching this again because I should. Footage pieces. Love that term. Using it forever.

[@MarkBennettCameraCrisis]

🤣

[@Dhuxul9]

Thanks man I want to skip buying a gimbal so this is very helpful

[@dayton7u76]

espero me puedas ayudar osea el programa usa el 100 por ciento de mi cpu q es una i9 y mi gpu 3060ti no lo utliza ni al 50 porciento , como puedo arreglarlo y esta selcionado gpu dedicada xq ni la cpu me sale para elijir

[@namelessfrce5842]

Great Video I just tested a video footage clip using this video and the software is great for stabilization and what it is Thanks for sharing this Video

[@pashtech]

thanks! for this. I kept thinking catalyst browse was something really complicated until now.. lol

[@MarkBennettCameraCrisis]

Yeah - to stabilize the footage, there’s nothing to it.

[@SantisVault]

Who else got a ZV-E10 and is doing a crash course by watching Mark's Channel?? haha 😂 #ZVE10GOD

[@MarkBennettCameraCrisis]

🤣🤣

[@sandeepmortal]

Oh wow This video will help me in my ZV1 stabilization.

[@MarkBennettCameraCrisis]

It’s so great that the ZV1 has the gyro data too. 👍👍

[@kapilesh14]

Hey Mark, Thank you for the tutorial!

[@MarkBennettCameraCrisis]

You’re welcome!!

[@travelwithutkarsh9378]

Can i use catalyst browse if i have the lens stabilisation turned on in ZV E10? or does the steady shot have to be totally turned off if we wanna stabilise footage through catalyst browse?

[@alkayemediagroup4536]

how do we combine several mts clips to one full mp4 clip so we can edit?

[@craigneidel]

Nice overview for sure and great quality video.

[@MarkBennettCameraCrisis]

Thanks!!

[@dianewebb1855]

How funny I was just posting on one of your other post asking if anybody had a good tutorial for catalyst browse because I can’t get it to work and then I see this on your page. I got hung up first waiting for a new processor for my computer because I didn’t have enough cores to get the program to work. Now that I’ve got that situated I’m still struggling to how to use the stupid program lol.So you’ve already answered my question now I gotta a watch this!

[@MarkBennettCameraCrisis]

Make sure you turn all stabilization in camera OFF before recording.

[@johnnybayles7412]

Hey, Mark! Quick question. I am shooting with my zve10 and when I loaded up catalyst browse, only some of my clips had the stabilization option. It wasn't an option for my 120 slow mo footage... have you experienced that before?

[@OhioShaves]

Rendered my first video, even though this one is a year old. Thanks so much for all your insight.

[@adrianalvarez6380]

Great vid, I have a sony A73 and the footage I have can't be stabilize , Do I need to enable any specific feature in the camera before recording?

[@user-yr7il6cm6s]

thank you a lot, very infromative video

[@markusschuster5712]

Sometime there's an error and it can't be rendered. Is it just for me? Do you know if there's a error log?

[@JaredStarner]

Hi - love the content. What settings do you need to have on the ZV-E10 to make sure that gyro data is being recorded? I have an auto-focus lens on but the associated .xml file for gyro data is always empty.

[@MarkBennettCameraCrisis]

turn off the stabilization in the camera. You’ll see the ability to stabilize it when you open catalyst browse. once you find your clip, there will be an icon for stabilize that looks like a filmstrip

[@JackhopkinsCEO]

This videos are awesome 🦍🤘🏽

[@MarkBennettCameraCrisis]

thanks

[@mattjohnsonbest]

I have a 2 hr long video (140 gb) which is captured with Stabilization Off mode at 4K 60 fps. Catalyst Browse can not Analyze it. It doesn't export it either. What should I do? Any suggestions...

[@ryansxperiance]

I'm having an issue where when I try and record a portrait video and put it in catalyst browse, it stabilises it but when it saves it, it makes it much smaller, the size of the actual viewable video instead of the same file, and I'm not just talking about the small crop, this, it just makes it tiny in the middle of the screen instead of the like the original, anyways to fix this please ? Other than that, this tutorial has been perfect. Thank you !

[@VSN-wb2ly]

My a6700 fotages are black when it's exported, is there any fix?

[@mosheovadya]

Excellent. Thank you.

[@RoydenWakefield]

Hi Mark, great video but I have the paid version of Devinci, so im using the stabilisation functions in there. Wondering if you know how they stack up?

[@gustavocampi]

nice videos man!

[@infamismworldwild6248]

Thank you, this was helpful

Hey Mark. Did you ever have a problem with "invalid licence" error while launching Catalyst Browse? Cannnot use software on my iMac anymore :(

[@danyrockjr]

Hi Mark, I would like to ask you a question because I have just purchased a Sony ZV-E10 camera and I use "Catalyst Browse" to do my color correction. I downloaded my video files directly to my iMac's hard drive and did the color processing without difficulty. The problem is that when I do "EXPORT", my new video file created does not take into account the added effects? Does the camera have to be connected to the computer for this to work? I even clicked on "TRANSCODE SETTINGS", and it doesn't take anything into account in the export... do you have any idea? Thank you for your help. DRJ

[@Nohypetrends]

You're great man! you deserve more subscribers!

[@MarkBennettCameraCrisis]

I appreciate that!

[@JakeLevesquecreate]

how dod I register this. it wants my machine id but I don't know what that is

[@KyloTheDoge]

I'm having an issue with Catalyst Browse/Prepare where every OTHER stabilization analyze will crash the software. Super weird and super frustrating to use the program. The results have been good but I wish Sony fine tuned the software and did stuff like batch analyze as well.

[@monggieq4824]

stabilize clip is greyed out. What could have cause? any suggestion?

[@mamas-day]

Thank you! Super helpful

[@MarkBennettCameraCrisis]

Glad it was helpful!

[@adisons3965]

Sony should hire someone for naming their products. They’re really good at everything but nomenclature.

[@MarkBennettCameraCrisis]

😂👍

[@gustavrischmuller2569]

You nailed it.

[@ethannguyen7562]

Any problem with 1/200 shutter speed if we record 4k/24? I remember in one of your zve10 video you mentioned that for 4k/24p we need shutter speed of 1/50 which is around double the framerate.

[@MarkBennettCameraCrisis]

no problem, no. You still record in 4K 24p, but you need to raise the shutterspeed because 1/50 causes a motion blur. that looks good usually. But catalyst browse doesn’t like motion blur, it creates weird footage at times, so you raise you shutter speed to 1/100 or 1/200 because that eliminated motion blur and the program is more effective.

[@yongseo1533]

Thank you for the wonderful tutorial. I pressed the export button. The Export dialogue box appeared where I can see the clip that I was going stabilized. I pressed the OK button and then nothing happens. I am using Windows 10. Is there something else that needs to be done? Could you please give me some hint? I want to buy ZV-E10 because of this Catalyst Browse feature.

[@cvrkfishing]

Hello Mark, do you have any experience with Apple Sillicon Mac and Catalyst browse? I'm having trouble when I use my M1 iMac or MacBook M1 Pro - every second video analyzing the app crashes. Do you have any solution for this? Thank you :-) BTW: great videos!

[@YorkieFrancesca]

great video!

[@MarkBennettCameraCrisis]

Thanks!

[@TKrebs-ey7ed]

Hey Mark! Thanks for the great video! I really appreciate it! I am new to the videography and have two questions about Catalyst Browse: - You said that you have to turn off all stabilizers. Do I also have to disable the stabilizers in the kit lens (Sony ZV-E10) or can I leave them enabled? - Does the shutter speed have to be exactly 1/200? Should I lock the Shutter Speed at 1/200 throughout for Catalyst Browse to work properly? Thanks in advance!

[@MIAMILIFEANDFITNESS]

GREAT VIDEO..... 💪🏼

[@timgalletas3856]

As always amazing content Mark. I was going to say coffee, but man I would like to buy you a 🍺. You should set up a tip or buy me a beer account somewhere. 😎. Seriously, your content is amazing and it makes things so easy for us. Thanks again for your help!

[@MarkBennettCameraCrisis]

Thanks!! I thought about it, KZbin is supposed to eventually have a “thanks” button where you can tip a creator - but I guess they don’t think I need one yet🤣🤣. I’ll look at the buy me a coffee thing again.

[@llama307]

Nice and early - Ok back to my editing

[@VincentVision]

Something has happened recently where my Catalyst Prepare is COMPLETELY different and borderline unusable on Mac. Used to be able to batch export with percentage, now it's completely different. Anyone else having this problem?

[@lenceteh7015]

Thanks Mark! Got the ZV-E10 and paired it with Tamron 11-20mm f2.8 after watching your videos. Catalyst browse works great with this combo 👍 I'm thinking of getting Tamron 17-70mm f2.8 that comes with lens vibration compensation "VC", so was thinking whether Catalyst Browse will work fine together with the VC? Thanks!

[@MarkBennettCameraCrisis]

I’m not sure. Catalyst sometimes works with lens stability and sometimes not. but honestly, if you are using catalyst browse, the lens stabilization won’t make a difference even if it works. I find it’s best to turn off all stabilization and let the gyro data work.

[@IrfanKhokharFilms]

well done!

[@Suduaya]

Thanks, awesome, Subscribed!

[@MarkBennettCameraCrisis]

😀

[@toms_bay_bbq]

this was very helpful, thank you very much for putting it together. I do have a question. I follow your instructions on how to save the file to the T. In CB they changes are saved and after renaming it I can see that everything saved correctly. However when i click on the file to play in Quicktime the changes are not there. Just FYI I'm making the clips to upload to Instagram and YouTub. What am i missing ? Thanks for your help!

[@ido_is_here]

hey thank you for the videos, catchy and clear. can you please make a video about final cut? and a question- is it ok to work with final cut while working with more editors that using premier?

[@MarkBennettCameraCrisis]

you can use final cut with premiere editors, but the workflow isn’t as easy if all of you are collaborating

[@talk2shwetapavan]

thank you so much bro

[@Chinte]

Just a question how long does it take to render out let’s say 10-15 vlog clips just curious on how much time this adds to work flow?

[@MarkBennettCameraCrisis]

it depends on how long the clips are and your computer. my computer takes 3 mins to render a 1 min clip

[@smartwarden]

Thanks for the video. When you say Catalyst Browse does not support Manual lenses, does that also include Manual lenses that have electronic contacts with the Lens ? For example the Zeiss Loxia lenses have that interface and they transmit the EXIF data to the camera. Will the Loxia lenses not work with Catalyst Browse ? Thank you !

[@MarkBennettCameraCrisis]

I actually don’t know the answer to this - I haven’t had the opportunity to test that, but if it communicates exif data, then it would be my guess that it would work.

[@explorewithlove8475]

Hi when I use standard stabilization for Video on Sony Zv e10 catalyst browse doesn't work for stabilization the video footage... what is the 4k settings for catalyst browse stabilization? Also I try to stabilize a 5 minute 4k footage on catalyst browse it took me 35 minutes 😅. My device is M1 macbook pro base model 2020.

[@MarkBennettCameraCrisis]

It does take a long time to stabilize - usually 3-4 mins per one minute of footage on my computer. You can't use standard (lens) stabilization. Turn off all stabilization

[@emanuelshkambi2846]

Hello . thank you for the video . i am having problems with the Catalyst Browse . when i open it , it doesn't open completely , the program crops and it shows only a small part of it . please does anyone knows how to fix this ? thank you in advance !

[@MarkBennettCameraCrisis]

sounds like you you need to resize the window. put your mouse over the bottom corner and drag it until it’s bigger

[@hellounclesim]

About the flicker, apart from matching the fps to the venue, I think your shutter speed also has to be a multiple of the fps. This is easy in PAL countries, because every camera has 1/125s. But for NTSC, it gets tricky unless your camera has shutter angle. I am in PAL 50Hz country, so it makes sense to record in 25FPS but there is one venue I record at that has a giant monitor screen on stage that runs at 30FPS (29.97 to be exact) and I can only shoot at 1/60 seconds shutter speed at that place. I tried 1/125 seconds and there was some flickering - not enough to cause an epilepsy but enough to be distracting.

[@Miamissimo]

Thank you for that very helpful introduction to catalyst browse. The first time I've stabilized one of my Sony 10-20mm G videos I seriously thought "WHAT THE FOHK!?!", that looks sooo clean and smooth! Night/day difference! I'm super happy now! Altough I cannot stabilize footage made with my Sony 70-350mm G, as that lens somehow doesn't record gyrodata. I thought you can do this with all Sony G lenses. But it's ok, for tele I'd mostly use OSS and/or tripod anyway... Cheers! 🙂

[@MarkBennettCameraCrisis]

You have to turn off the stabilization - if you have lens stabilization on (or standard stabilization in the camera) the gyro data will not record

[@Miamissimo]

@@MarkBennettCameraCrisis after testing i feel like its more effective for tele (above 70mm) when using lens OSS + stabilize in post with davinci. Turning off lens OSS on a tele gives very shaky footage so catalyst has a hard time and might have to crop significantly to compensate.

[@TwinkieTerror]

Is there any video editor software that you can buy outright? I don't like monthly plans.

[@MarkBennettCameraCrisis]

Unfortunately no, but catalyst browse is free and it has most of the functionality of catalyst prepare.

[@familyjoys]

Hi mark,just wanna ask..i got my A6500 and it can shoot 4k videos..do A6500 video can be use in catalyst browser?

[@MarkBennettCameraCrisis]

The gyrodata is only recorded in the Neewer Sony cameras, unfortunately. The ZV-E10 and the fx30 are the only APS-C cameras that have it

[@HISPEKK]

Have you used Catalyst with the Sony A1 cheers Barry.

[@mac24x7]

When ever I start Catalyst Prepare, it loads infinitely and says the website to register cant be started. Anyone else got this issue?

[@hamdhaanbinanvarsadath127]

your videos are awsome

[@MarkBennettCameraCrisis]

Thanks!!

[@YogenderKumar18]

Can stabilise my mobile video using this software ???

[@41vids]

I just bought catalyst prepare, just for batch/bulk stabalization for all clips, but its greyed out whenever I highlight more then 1 clip, I thought that was the point of upgrading from catalyst browse to prepare, am I missing something? Someone please help!!!!

[@MarkBennettCameraCrisis]

Just use the program like you are about to stabilize one clip. When you click "export" it will give you the option of selecting multiple clips before performing the export

[@WholesaleZone]

Why is the life not made do easy as year on year pass by ? Why to go through long procedures ? Why not give stabilisation charging more money with zv e10 , so it will have no problems to be discussed, who makes camera and launches in 2021 & 2022 coming in

[@MarkBennettCameraCrisis]

Stabilization seems to be one of your major criteria - and that makes sense if you’re vlogging a lot. I recommend looking at Olympus cameras. the EM10 mark iv has excellent stability and is a great camera. it’s video specs aren’t as good as the Sony - but everything’s a trade off

[@imkavindu]

Hey Mark, I just realized that using a manual lens like TTartisan 35mm doesn't allow me to stabilize footage. But the kit lens does. It could be due to the electronic contact points on the lens. Is that correct? Sorry, I'm still new to the stuff.

[@MarkBennettCameraCrisis]

yes, catalyst browse needs an autofocus lens that communicates with the camera

[@zairalove]

Hi Mark, Thank you so much for this video - it was REALLY helpful! Quick q's -Have you tried out the new Zhiyun Crane 3 and if so, do you think it would hold up the Sigma 16mm lens? -What lens would you recommend to get a fisheye look that most KZbinrs have when they film? Thank you!

[@MarkBennettCameraCrisis]

Thanks!! The Crane M3 is arriving tomorrow for testing. But it will definitely hold up with the ZV-E10 and the Sigma 16mm. I would recommend the Tamron 11-20 f2.8 for a wide field of view. The KZbinrs don’t use true fish-eye lens they just use a wide lens. A fisheye is more circular and not a great look for vlogging, in my opinion.