How to use DAIKIN BLUETOOTH SERVICE CHECKER..

[@guuuuustaf]

I am a Daikin Service partner. Why in the world havent they given me this. Perhaps it saves Daikin time, and also mine. I have the d-checker but that is not convinient to hook up.

[@gang1798]

Thank for maybe you can help us out. I’ve been trying to reach out to diakin many times about the app. It doesn’t work at all. As a service tech and someone who spent my own money on the tool and training for it, the app is garbage. It crashes every time I try to use it. It’s a step in the right detection for future Hvac servicing just please get them to fix it.

[@vikt252]

Great video. If you long press bluetooth don't need to go settings :)

[@maracservices]

Thanks for the Bluetooth tip haha

[@prowesstv]

wouldn't mind seeing a megga vid from you i personally have one but i only use it for compressors and larger fan motors, never thought about the sensors as u mentioned wouldn't mind learning 👍🏽

[@maracservices]

Yeah cool, I’ll make a vid 👍🏻👍🏻

[@ikewirantari5371]

@@maracservices 8

[@agostinhomartins8373]

Great content bro, keep em coming 👍

[@maracservices]

Thanks mate!

[@agostinhomartins8373]

@@maracservices can you post some content on inverter testing with an actual inverter tester if you have some clips. Cheers

[@maracservices]

@@agostinhomartins8373 sure can mate. I’ll film it next time 👍🏻

[@rdenir]

Agree with you there Mitch, It would be very helpful if you could turn the units on/off or change temperature and mode and clear errors as well.. Especially when the condensers are located on a roof and you are working on VRV units in apartment blocks.. And yes, that app is super slow connecting. It feels like I’m on dial up when using it..

[@maracservices]

Yeah it’s definitely not the perfect app. I used to have heaps of trouble trying to connect to it but these days it seems better. Also they didn’t have the new R32 systems on it either but that may have changed. It’s definitely handy to have though.

[@aus_aircon_ref_mech6671]

Hello Mitch Great little tool from Daikin, how can I get my hands on one of those? Regarding the inverter checker, is that from Daikin as well? I ask because I’ve seen guys use an inverter checker from Daikin and from Mitsubishi electric, there are also generic checkers off the internet. In your experience do you have to use brand specific inverter checkers, or can you use ANY inverter checker? Great videos as always! 🎉🎉🎉

[@maracservices]

Hey mate, I got both the Service Tool and Inverter checker from Daikin in Taren Point (Sydney) but any Daikin should stock them on the shelf. I can confirm that you definitely don’t need a specific brand of inverter checker. They all work the same and you can use them on all brands. I recommend doing a free Daikin training course which shows you how to use the inverter checker. A lot of techs are actually using them wrong. 👍🏻 goodluck

[@mountainklima5602]

YOU CAN MAKE YOUR OWN ITS JUST A BLUETOOTH DEVICE, THE MORE DIFFICULT IS TO GET THE CONNECTION CABLES, BUT YOU CAN BY IN CHINA A COMPATIBLE DEVICE WITH CABLES FOR AROUND €100

[@Louisyongcool2328]

Hey Mitch, like to see if you can make a video on the inverter checker that will be a great help us thanks👍

[@maracservices]

@@Louisyongcool2328 okay will do!

[@pauloricardodemelogomes6520]

I like so much this video, but something makes me confuse. This analyser verify the current of the machine/equipment? I need to monitor this.

[@maracservices]

It doesn’t measure the current draw of the machine however you could use a clamp meter to do that ?

[@pauloricardodemelogomes6520]

@@maracservices Yes, i can do that, but in my case, i have to know If the outdoor board is Reading correctly the current. I do maintenance on eletronic boards (PCB), and I have one that turns the compressor on for 50 seconds, turns it off, and turns it on again, 6 times, and it gives error E6. I removed this board, tested it on the bench, and it works normally. I believe that the board is reading the current wrongly, or the compressor is damaged. So I needed this parameter. Midea for example presents current and voltage in its analyzer.

[@maracservices]

@@pauloricardodemelogomes6520 interesting. To the best of my knowledge, this analyser does not have that measurement however in this case, can you measure the current of the compressor during start up with a tong tester clamp meter. Maybe the compressor is indeed pulling high amps?

[@pauloricardodemelogomes6520]

@@maracservices Thanks Mitch!!! Sucess to you! I Will make this test today in the client's house. To make sure that compressor is ok or not.

[@agostinhomartins8373]

Hey Mitch, how much did this set you back? looking to pick one up for some PM work.

[@ianorr760]

Awesome vid Mitch, did you say they’re good for little splittys too? I service about 200 Ftxs35evma at work… Do you buy them direct from Daikin? Thanks for sharing bro 🙌🏼

[@rdenir]

Yes, it can only be bought through Daikin,, but it’s pretty pricey..

[@rdenir]

And yes for most newer split systems it works on them as well..

[@maracservices]

Yeah man they work for little splits. I can’t remember how much they’re worth but I bought mine from a Daikin Distribution Centre but you can get it from your closest Daikin place I guess. I think I might have paid $500 for the service tool and my inverter checker (I think). It was a while ago. If you work on Daikin a bit then it’s a good investment. Maybe hit up your boss to buy one 😂😂

[@jpreziose]

Hey man I having trouble trying to find the right thing to connect to a minisplits. I don't have the isolation cable was it susposed to comet the Bluetooth device? My minisplits is 240

[@jpreziose]

Also the one they gave me the box it came in says it's for iPhone which I have a Android, it may not matter anymore the version I have is the 999172t

[@epicone2449]

Which values give you discharge superheat?

[@sv6k0a39]

Did you order one from Daikin directly?

[@maracservices]

Yeah mate, I just walked into a Daikin Distribution Centre and bought it off the shelf.

[@desieranks]

Does mitsubishi have a service checker like this

[@victorviloria6854]

Hola gracias por compartir la información saludos desde Colombia, sabes estoy interesado en comprar el dispositivo pero no lo consigo acá en Colombia.

[@mountainklima5602]

Caballero se puede hacer unos por unos pocos euros no mas de 20€ pues realmente solo es un comunicacion de bluethoo lo mas complicado es conseguir los conectores especificos , tambien si lo quieres para pc con un adaptador de rs485 a usb te coinectas por protocolo de comunicacion rx tx y encima te vale para lg, daikin y muchos otros mas. dejo link del producto kzbin.info/www/bejne/iH20mImtpt-MiNU

[@noahoyeah]

This device or the service checker 4. Which is best?

[@maracservices]

Definitely this one 👍🏻

[@mountainklima5602]

YOU CAN MAKE YOUR OWN ITS JUST A BLUETOOTH DEVICE, THE MORE DIFFICULT IS TO GET THE CONNECTION CABLES, BUT YOU CAN BY IN CHINA A COMPATIBLE DEVICE WITH CABLES FOR AROUND €100

[@VRF-t2y]

Boa tarde onde compro esse equipamento?