How to use Epoxy Primer

We will show you how to apply Epoxy primer, and how many layers should be (1-2), what’s the flash off time and drying time of Epoxy primer.
Content:
Main characteristics 0,7
Cleaning and degreasing surface 1,07
Applying the first layer 1,30
Applying the second layer (if needed) 1,54
If you need any further information, you can visit our website chamaeleon-prod...
News on new products and of our brand development around the world you can find at our
Instagram account / chamaeleon_gmbh
or Facebook / chamaeleongmbh
Chamäleon GmbH on KZbin:
We are proud to have our own channel, where we show how to apply our products.
/ chamäleon gmbh

[@bradhuskers]

Can we use gluvitt first on the rivets and seams, and then apply the epoxy primer 72 hours later?

Sorry for the long wait. It seems to be…I found this phrase on the Gluvit page “For maximum ultraviolet protection, Gluvit must be painted after full cure. Gluvit can be overcoated with any marine paint or other coating compatible with epoxies. Check with your paint supplier and make sure the coating you are using is epoxy friendly and suitable for your application. „ so it should be passible…but to be 100% shure, it has to be testet. We as a company do not know this product and have not done any tests with it. i recommend testing the combination on an invisible spot or a piece of sheet metal in advance

[@Gabrieldekmak]

Hello, we already primed with your epoxy primer and it’s excellent, do we need top it up with 2K primer or another primer before painting?

Sorry for the long wait. In principle, there is no need to cover with other primer. But it depends on what further application steps are planned. If, for example, you want to apply a 2K top coat, then it is not necessary to apply an intermediate coat with a primer. However, if it is planned to apply filler(putty), it is strongly recommended. even if a primer coat of clear varnish is planned, i would recommend an intermediate coat followed by intermediate sanding to create a smoother surface. however, if the surfaces are not visible, this can be dispensed with. It is important that there are no recognizable sanded-through areas on the metal substrate. Otherwise, you have to coat these.

[@Gabrieldekmak]

Got it, thanks for the follow up! Can i use your 2K 4:1 primer (14444) cause i remember that the hardener was “Acrylic”.

[@anthonysalcedo3740]

why put epoxy over a painted surface?, wouldnt normal primer be fine? i thought epoxy was more for sealing the bare metal? there questions as im just learning

Hello. You are correct, epoxy primer is applied to bare metal and in the video the primer is also applied to new metal surface. This surface is unpainted. Epoxy primer 455 is an excellent option that provides active corrosion protection and excellent adhesion to iron. It is universal, as it gives a dense layer, and can also be used wet on wet. Easy to sand even after a long time. An important factor is the fast drying, after 45 minutes you can already apply the base coat. The primer is composed of non-toxic pigments.

[@Yuaaaur]

Do I have to apply thinner when mixing epoxy primer? doesn't that lower the strength of the primer?

Hello. Yes, you have to add the thinner regarding to tds, it affection on viscosity and on selfleveling of primer first of all

[@fenix-iw4mg]

​@ Hi. I finished with the bodywork on the oldtimer, welding and other things. The car is 50 years old with original paint, all the rust has been removed. I should paint it now with the best possible anti-corrosion paint, so that it doesn't rust, because it will only go to professional painting in 2 months. Is this product suitable for this and how many hands should be applied?

[@fenix-iw4mg]

Hi. I finished with the bodywork on the oldtimer, welding and other things. The car is 50 years old with original paint, all the rust has been removed. I should paint it now with the best possible anti-corrosion paint, so that it doesn't rust, because it will only go to professional painting in 2 months. Is this product suitable for this and how many hands should be applied?

Yes, this is the right product, apply 2-3 coats

[@randomjack477]

Can i apply PU Enamel paint over the Epoxy primer?

2k for sure...but 1k they should test

[@amitjadhav8421]

Its smelling or non smelling