[How To Use] Film-Free Metallic Waterslide Decal Paper (Gold/Silver)

[@adilsonfontana679]

Good Morning.. do you have any branch or subsidiary in Brazil? in this video you inform free shipping .. lol but freight is more expensive than leaves ... has no way... Do you have a place in Brazil or Latin America to buy these products? thankful Fontana 早上好.. 您在巴西有分公司或子公司嗎？ 在此視頻中，您告知免費送貨..大聲笑 但是貨運比樹葉貴。 沒辦法... 您在巴西或拉丁美洲有購買這些產品的地方嗎？ 感激的 豐塔納

[@lucidlight]

Can I be scratched ok? How dose it hold up in a dishwasher?

[@edinadeberling4996]

Hi, Where can I buy this in United Kingdom? Your link is not available anymore. Thank you

[@DamonKelly01]

I would like to use this on the headstock of a guitar. Obviously I cannot put it in the oven, so can the final curing stage be done with a hairdryer or similar?

[@SUNNYSCOPA]

We never tried it on the head stock of guitar. But, it could work with hair dryer. You will use film-free metallic decal paper with glue w1+ Before drying, clean off the glue residue with wet wipes completely. It is too hard to remove the glue mark after drying.

[@DamonKelly01]

@@SUNNYSCOPA Thanks for that. I should add that the headstock is coated with very smooth acrylic clear-coat lacquer. Is this product compatible with acrylic paints?

[@s.v.arulshiju507]

How the film layer is made? What is the unique benefit of it?

[@giovannibadalamenti6132]

Is there a way to add a black border to the metallic decal. For example, if I want lettering to be in the metallic gold but still have a black border, how would this be accomplished? Thank you.

[@oniekahoward267]

You mentioned putting this in the oven. Is it safe to use your home oven or does it require a separate one that is not used for your normal day to day cooking before and after using your products?

[@sonmoc9999]

Can this stamp be applied to a bicycle? What do I need to do? Thank you very much!

[@illustraitartistofficial9657]

would these work on say a plastic action figure

[@jamesmarshall6358]

Hi, I notice at 3:49 that after you remove film, you can still see the glue very clearly, is there a way to remove the glue? Can you rub with alcohol after drying to remove glue but leave image? Thanks.

[@SUNNYSCOPA]

Hi, James Yes, you can remove the glue with rubbing alcohol. We have developed a new type called "Multi-Use", which makes the ink durable against rubbing alcohol. It is already available on Ebay and will be on Amazon quite soon. Thank you Jimmy

[@amandafletcher4379]

Do you still have the gold available? I'm not seeing it on your shop

[@SUNNYSCOPA]

Gold is in stock on our Global site. If it's still not showing, please drop us an email, we can put through the order for you.

[@sumairanwer5325]

Is this applicable on imitation jewellery

[@anitamarskamp1866]

Can I use this technic on candles? I have a specific candle wax wich causes dripping when use decal transfer paper. So only the ink on the candle would be perfect

[@SUNNYSCOPA]

Yes, you can. The metallic will be quite durable against the candle wax. You cannot make it film-free (self-weeding) though. To do that you have to fire the decal at high temperature, to which the candle will not survive.

[@christinevalerio5495]

is there an alternative glue besides w1?

[@SUNNYSCOPA]

Christine Valerio Hi, Christine. No, not for the metallic as yet. The metallic is not for porous surfaces so either way w2 has no use. Hope this helps :)

[@supermario326]

se consigue en argentina este producto?

[@zoerogers2858]

You say that you can allow the decals to dry naturally before removing the film but when I tried that the decals didn't stick. Also, when I dry them in the oven (as per pack instructions ) they bubble up even though they were completely wrickle and bubble free before hand. Any help with this would be appreciated as I was so excited about using your product!

[@SUNNYSCOPA]

Hi Zoe Rogers, You must bake it in the oven at 100C for about 10 minutes. Natural dry can not make it. Air bubbles could be caused from the water remained under the decal. Carefully remove the water with squeegee rubber before putting in the oven. Too high temperature in the oven can make the wrinkles. Good Luck!

[@ryanwarners4341]

hello, would it be possible to use an inkjet printer or is this for laser printer only?

[@SUNNYSCOPA]

It's only for laser printer.:)

[@mantmstb]

What kind of ink you use for laserjet printing?

[@SUNNYSCOPA]

mantmstb , any regular laser toner is OK.

[@ibkizzle]

Can you put this on glossy gift boxes, if so, is it okay to wet the box without damaging?

[@SUNNYSCOPA]

Hello, ibkizzle Umm.. actually the gift box is tricky because it absorbs water before you can apply the decal properly. So the answer is no, sorry.

[@midasracer]

Can I use this to make small decals for 1/18 scale model cars? For example can I make a car logo of letters of 2mm height (like J A G U A R , or P O R S C H E ). Also small white stickers on wind screens.

[@SUNNYSCOPA]

hi, midasracer Yes, that's fine. Smaller the images, it's much easier to work with. You might need tweezers though to move around the film. To apply white letters, you just have to choose the white film option. Hope that answers your question.

[@MehakGulzar]

Is there another technique if luminator is unavailable?

[@SUNNYSCOPA]

Hi, I'm sorry, but you must use the laminator to use the product.

[@Oby4455]

What if you have a decal with multiples colors and have the metallic gold only on some part of the design ?

[@SUNNYSCOPA]

Then, you want to check if you are using a right laminator. We always recommend a laminator with at least 6 rollers. :)

[@Oby4455]

@@SUNNYSCOPA Sorry I made a typo. I meant what if you want to have the mettalic gold only on some part of the design? Meaning some part of the design would be gold and the rest in other colors. Thank you!!

[@fauzip4189]

Is it possible to apply two layers of decals, first the color, and second is the metallic one. I'm interested in vintage ornament where certain areas of artwork, such as stroke edges, are metallic gold and silver.

[@sharzanco]

kzbin.info/www/bejne/lZm5lJtnnbqJadk see this and this kzbin.info/www/bejne/anSTn2NuqtJ0atk

[@assadnujjoo]

What temperature do you set your laminating machine?

[@fashionbeautyandwine]

120 degrees

[@braderslievidz7232]

where can i buy this product

[@SUNNYSCOPA]

Hi, please visit our website at www.sunnyscopa.com :)

[@KaiHowells]

Hello, I need to apply a gold decal with black lettering on it. After I have transferred the gold design to the blue decal paper, can I take this blue decal paper and run it through my laser printer again to print in black on top of the gold?

[@SUNNYSCOPA]

Hello, Kai! Actually that is a very good question. However, we don't have any ways to express or print black lettering on top of the gold. We will take your suggestion and certainly consider it for our next R&D project! If you really want the lettering, perhaps the only way is to use standard laser printer and apply the decal on top of the sealed gold. I do not recommend using another film-free on top of the metallic because the gold can come off when you remove the foil. Thank you.

[@KaiHowells]

@@SUNNYSCOPA - what would happen if, after doing the first lamination, and peeling off the gold foil layer, I took it and ran it through a laser printer to print in black on top of the gold. Would the gold foil survive going through the printer?

[@Oproprietario]

qual esse liquido que aplica, antes do decalque?

[@SUNNYSCOPA]

É uma cola à base de água especialmente projetada por nós. A cola também é comprável com os papéis. It is a water based glue specially designed by us. The glue is also available for purchase with the papers.

[@zoerogers2858]

Can you use this on sublimation blanks?

[@SUNNYSCOPA]

Hi, Zoe Yes, you can. That is what they were originally designed for :) Jimmy

[@lauran5105]

Hi, Do you need to specifically buy the decal paper in 'blue'? I can't seem to find the blue colour anywhere.

[@SUNNYSCOPA]

Hi, Laura The blue papers are included inside the Film-Free Metallic Paper package. You have all the papers that you need in there. Thanks Jimmy

[@lauran5105]

SUNNYSCOPA Thank you! :)

[@lauran5105]

Also, what is the difference between Type A and Type B paper? Is the blue paper Type A or Type B?

[@SUNNYSCOPA]

Laura, The Type A is for the glossy, hard surfaces and the B is for porous surfaces. They also use different glues to assist adhesion; watery, transparent Glue W1 for the A type and white, viscous Glue W2 for the B type. You also have to cure the image with heat for Type A and with the B, this heating is not required. The downside with the B type is that it could leave glue residue once it dries. The blue paper is neither actually. It has nothing to do with the Type A or B. They are actually blank decal papers specially designed to work with the Film-Free Metallic products. Hope this answers your question. Kind regards, Jimmy

[@lauran5105]

Thanks for your help! :)

[@DinastyRodCustomDRC]

thx

[@docterxii]

Hi i need to ask. Can it clear coat over Film-Free Metallic Waterslide Decal Paper and Type A Film-free Waterslide Decal Paper after final?

[@SUNNYSCOPA]

Hi, Yes you can, excluding lacquers.

[@EBTESAAM77]

When I remove film the color come out with it what can I do

[@SUNNYSCOPA]

After curing, wait for a few hours before removing the film. Also squeegee out all the moisture and air completely before curing. Thanks, Jimmy

[@Rain-sk3mf]

what is the coating paper? just the normal paper for print?

[@SUNNYSCOPA]

Hi, Rainbo. The coating paper is also a decal specially designed to assist lamination. Thanks.

[@Rain-sk3mf]

then where i can buy it?

[@SUNNYSCOPA]

International. stores.ebay.com/sunnyscopa www.amazon.com/shops/sunnyscopa Korea Store(online). sunnyscopa.co.kr Thank you. :)

[@coolcraftystuff8138]

Is this for laser printers only?

[@SUNNYSCOPA]

Hi, Kim At this stage, yes it is.

[@max_lure406]

the first time whether the printer uses decal paper and can use printer ink

[@SUNNYSCOPA]

Sorry, I am not quite sure what you mean by that. Could you please explain a little more?

[@ducharme8170]

is there a way to apply the decal to the back side of glass so that it shows metallic gold through the glass?

[@SUNNYSCOPA]

Hi, Kristin. Yes, there is. You just have to apply the decal face up instead of flipping it over.

[@ANCAPVoluntaryist]

$50 shipping to UK on $50 order is just way too much shipping for you to expect me to order. It's UK, not the Moon?!

[@SUNNYSCOPA]

Sorry about this, I totally agree. The shipping is a bit high because heavy paper and overseas. In the meantime we are working on a US store and EU store

[@Milkmans_Son]

Who the heck has a laminator that does full 8.5 x 11 sheets for pete's sake?

[@SUNNYSCOPA]

Hi, If you buy it from the US, most of them should take 8.5 x 11 sheets. They are the standard size in the US so I don't see how the laminators would not take 8.5 x 11 sheets. Thanks Jimmy

[@Oproprietario]

bom dia

[@Oproprietario]

manda para o Brasil? passa detalhes para [e-mail]

[@multyplusprintsolution]

Olá, organizart, vai ali na descrição, clica em mostrar mais e tem a relação dos vendedores: Prefira o ebay porque o frete é grátis. Faça o cadastro e depois a compra. Fique atento, pois terá que selecionar tamanho, quantidade, cola, etc mas é bem fácil. Eu já fiz a minha compra e estou no aguardo stores.ebay.com/sunnyscopa