How to use FireWire WITHOUT Thunderbolt or adapters to capture DV & HDV tapes with an old computer

[@JDavidMcGregor]

Solution: Go back in time.

[@cosmic_sky_mountain]

so you would have to build a time machine first !!

[@FreshSqueezedLightning]

Just buy a PCIe firewire capture card, they still sell them online

[@BankaiIchigo12345]

By the way any computer that supports thunderbolt 3 implicitly supports thunderbolt 2. The main difference is the connector shape. There may be some circuit differences, but there's an embedded chip in the thunderbolt 2 to 3 adapter that takes care of those differencess. It's a very tiny chip that sits in the plastic shell that houses one of the connectors, just behind the connector itself. Windows does not need to explicitly support thunderbolt 2 for this to work. Windows only sees the thunderbolt 3 chip in the cable so it has no problem recognizing the cable. That chip translates any commands that are needed to the thunderbolt 2 equivalent command, and then the thunderbolt 2 device only sees the thunderbolt 2 protocol being used, so it thinks it's connected to a thunderbolt 2 host. This system works flawlessly. There's no need for any explicit support in Windows for thunderbolt 2.

[@BankaiIchigo12345]

My only letdown is the fact apple stopped making the firewire to thunderbolt 2 adapter. I had assumed that since it was so long after the discontinuing of the firewire port by most companies, the fact that Apple was still making this adapter meant that apple had decided to take a an unusual approach and indefinitely support FireWire. So I was in no rush to buy the adapter. Then one day, without warning it just vanished from the official apple website. Typically a company would post a warning to potential customers of an impending discontinuation of a product. But apple didn't. Nothing posted on any official apple owned websites said anything about this product being discontinued. One day it was just GONE!

[@JerryPH]

Hey Scott, good video. I have a Mackie 1640i FireWire mixer. I sue two PCs, an older dell XPS that has FW integrated on the motherboard. I’ve used windows 7 and 10 on it and it works to this day. I also have a new XPS added a PCIe FireWire card and on windows 11, it works nearly as well, just as slightly more latency. FW can be made to work on modern hardware using up to Win11 successfully. Apple, on the other hand decided to remove all FW support from their Core Audio. There may be a way to get it back but at the cost of reduced security.

[@S-Jon]

do yo do something in wind dv? i found that the quality changed compared to the actual camera. And then, when editing in your laptop, do you do something like change the format ?

[@ScottSchramm]

Nothing special. I show the process in the video.

[@PathumAddarapathirana]

Thanks!

[@ScottSchramm]

Wow, thank you so much for the contribution!

[@fletzyproductions1190]

3:39 that is a issue i see on many camcorder forums. The solution i found is that you should never leave any device on when connecting the firewire cable otherwise you can short circuit both of the boards To fix your camera i would suggest swapping the port of the camera you had with the camera you bought (did this with my sony hvr z1) it should be a pretty quick fix with sony cameras, but i dont know about canon…

[@panamdragonboat]

Thx. a bunch of my Sony cam 4-pins have crushed in so looking to replace the port inserts.

[@BankaiIchigo12345]

Wrong. FireWire, like usb, is INTENDED to be operated as a hot-plug system.

[@Populous3Tutorials]

1:40 out of these 4 "heads", i have the very left one that on the other end is similar (so small firewire to small firewire) does that work? if i get a firewire card that has that small slot, it should fit, while the other end goes into the camera (?)

[@Populous3Tutorials]

edit: so basically that cable shown at 2:32 (bottom left) LBSC

[@Populous3Tutorials]

also, my camera side screen (3:44) is dead, but camera still works and turns on etc will software be able to just record as i put the tape?

[@ScottSchramm]

@@Populous3Tutorials Yes, you can use the 4 pin to 4 pin FireWire cable and it will work. And if the screen is bad but everything else works, then yes it should be fine because the computer will "run the camera" since it can send commands to start the tape, rewind, etc. If your camera has a small viewfinder/eyepiece you may be able to use that to monitor in case you need to go into the menus.

[@Populous3Tutorials]

@@ScottSchramm thanks will try it

[@Fred-g2k]

Virtually ANY type of legacy adapter is available on Aliexpress for very reasonable prices but yes, generally it is just easier to use an old computer. I kept my old HP notebook (NX6320 running XP) from 2005 just for this type of work as it has a firewire port, VGA port, serial port, and even an old parallel port! Old computers are also useful for old equipment like scanners that don't have drivers available beyond XP. I swapped out the HDD for a SSD to really speed it up.

[@samirocket4215]

Hi, I have some problems with my Acer aspire 4520, WinDV says "Error: Can't find DV output pin", the device is running on windows 7 with the built in drivers it comes with, don't really know what could be the problem, any guesses?

[@ScottSchramm]

The FireWire port on your camcorder might be bad. Does the camcorder show any indication when you plug it into the PC vs when it's not plugged in?

[@mobilemusicinc1]

Scott thanks for putting these videos together. I am now trying on an old Mac running OS 10.5.8 it has Firewire 400 so I am running FW 400 to DV and still do not see either of my 2 Sony cameras. One is a Sony DCR-HC38 the other is DCR-TRV460 NTSC. When I go to check the firewire bus a message comes up in red Waring unable to find firewire devices and max speed is up to 400 Mb/sec. At one time I had it working on my 2020 M1 MacBook Pro using all the adapters. I think my Thunderbolt 2 to 3 went out. On an old Mac do you have to hit a certain key when you boot up the computer for it to recognize an external device?

[@ScottSchramm]

You may be thinking about Target Disk Mode but that’s not applicable with this. It sounds like your FireWire cable is bad since it doesn’t work with either camcorder or either Mac.

[@metalplane3]

I have a new HP Omen PC. It appears to have PCIE X1 slot, But the segments are reversed. In other words the longer section of the slot is towards the front of the PC and the smaller segment to the rear. This is the opposite of the adapter cards I find everywhere. Is there a solution?

[@ScottSchramm]

Sometimes the slots are a “combo” and have more pins than needed. A 1X card will fit in a 4X slot for example. To be sure, you’ll need to find the manual for your PC or look at the motherboard itself to confirm what slots you have but generally a 1X card will be compatible with anything from the last 15 years.

[@benr7168]

Scott- Thank you so much for your content. I was about to pull the trigger on a firewire adapter from ebay but saw this and now looking at a 2012 mac mini with a firewire 800 port. for the around same price! hopefully it will suffice.

[@sl5311]

how did it work?

[@chrisf5475]

that the cable from the camera needs to be a fire wire 400 and then you need the adapter to change it to 800? Is it true that a table that goes directly from the camera to a 800 connector will not work?

[@ScottSchramm]

Yes you can use that kind of cable. I have one linked in the video description.

[@chrisf5475]

@@ScottSchramm thanks… 2 2010-2011 MacBooks with different OS won’t detect my JVC camcorder… might be a bad cable then, although it’s brand new.

[@donniedoom6130]

I have a Mac with a 6 pin FireWire 800 port but don’t have iMovie on it, is there some other program to import the videos from?

[@ScottSchramm]

You can download iMovie for free or try QuickTime.

[@卡拉永遠OK唱不完]

The reason why it bluescreen at 3:02 during Windows XP setup was because you need to set to IDE mode in BIOS

[@ScottSchramm]

Good to know. Thanks!

[@卡拉永遠OK唱不完]

@ welcome but this only happened on lga775 systems.

[@kalebemenezes3476]

Hey Scott, could you help me? My church has an old camcorder, a Sony HVR-Z1U, and we would like to use it for live streams. The image quality of this camera is very good, but I don't know how to transfer its footage to the computer without losing quality. Using this method you showed, can I capture the camera's image in real time to use in the live stream?

[@ScottSchramm]

Yes, if you put the camera in "record" mode, it should make it appear as a webcam on a PC. Just be advised that audio does not work in this method. If you want audio from the camcorder you'll need to use a 3.5mm cable in the headphone jack and connect that to an input on the PC. However in a church you probably already have an audio mixer so it's best to use the sound from that.

[@florianborkenhagen9434]

I got my Cannopus Box working by using a Dell Firewire Card with their Legacy Driver for win 10. Works good with DV Video. Before that i used a old vista Laptop Display wasnt working, pretty anoying, i couldnt get the Bios over the external Display. Thats why i changed. But i recomend to use at least something with a dual Core Processor. Core 2 Duo or a Athlon 62x2. Otherwise the CPU get a relative high load. Maybe i will try a Mac, the older ones are also dirt Cheap. A set of Keyboard and Mouse is worth more than the Old Mac Computers itself, many of them have firewire too.

[@TerrydeAlaska]

I have a 2015 MacBook pro with thunderbolt 2 ports. I want to connect to a 4 pin dv connector on my Sony Handycam. What adaptors do I need?

[@ScottSchramm]

You need the Thunderbolt to FireWire adapter which was discontuined.

[@TerrydeAlaska]

@@ScottSchramm Can I go from 4 pin dv connector to usb 3?

[@ScottSchramm]

@@TerrydeAlaska No

[@stacydescoteau4408]

Hi Scott. I'm looking at a Mac Mini that has a firewire port. I can then plug my Mini DV camera into that port and transfer video correct? Before I buy it is there anything else I should ask? I'm not a Mac user so is there an operating system within there that I should be aware of that may not work with my camera for capturing?

[@stacydescoteau4408]

Also do you suggest a certain software with a Mac to capture? I've only done PC so I'm used to WinDV, Adobe Premiere Pro or Virtualdub

[@ScottSchramm]

If the Mac has a FireWire port built in then you are good to go. You can install any OS and use iMovie to do the capture. Check out my other videos if you need further help.

[@KoenPol123]

Hey, so I was thinking building a pc with the latest intel processor. Is it possible to connect a pcie card in it and then capture the footage or is that not possible with the 12th gen and above processors?

[@ScottSchramm]

If you use the PCIe card, it will work regardless of processor.

[@microstorm]

I have an older analog hi8 Sony camcorder (has FW 4 pin output), would using the 4 pin to 6 pin method work?

[@ScottSchramm]

Yes, same method will work

[@Obsttellermitbanane]

from what ive heard it shouldnt work. updates would be appreciated

[@ScottSchramm]

@@Obsttellermitbananeif the camcorder is analog hi8 only then it won’t have FireWire. If it’s digital 8 and has FireWire, most are backwards compatible and should do the analog to digital conversion.

[@davidcolthart9976]

Really helpful thank you! After searching for days I finally stumbled across your videos which are the only ones to address this issue in detail. I got my hands on an old MacBook pro running Yosemite 10.10.5 that has a direct firewire port which finally solved my initial problem. My new problem is that iMovie is no longer installed and I can't download it in the app store because the OS is so old. Is there any other software or another route that could work? I'm so close and desperate to finally make this work! Fwiw camera is a Sony DCR-TRV17, and I'm trying to digitize some old videos to create a gift for friends and family.

[@ScottSchramm]

If you open QuickTime, choose File > New Movie, do you see the camcorder listed? (make sure it is on and in playback mode). Another option I have not tested is this: download.cnet.com/lifeflix-minidv-importer-free/3000-13633_4-76428938.html

[@zebadiahwitch]

So the only way to transfer video from an old camcorder is buy and set up an entire OLDER OS?

[@ScottSchramm]

No, there are other ways. Check out my other videos on this topic: kzbin.info/aero/PLeiKzXHZh57DW9y3cg_4i8WOeYs6a0O4c

[@sl5311]

I did some add'l research. I have a Windows 10 Pro desktop with an AMD Ryzen processor and there is a known problem hooking up firewire ports to it. So I am back to looking at Apples on your list. What do I do once I have uploaded them the miniDV tapes to the Apple-how do I get them off onto a thumb drive? Sorry I've never owned an Apple before. Thank you.

[@ScottSchramm]

On a Mac you would use iMovie to capture the tapes. When you’re finished you can export the video using iMovie into whatever format you want (MP4) and then connect a flash drive and drag and drop the files to the flash drive.

[@sl5311]

@@ScottSchramm Ok thank you. I'll keep you posted. I really appreciate your commitment to this puzzle! Seriously it is very impressive.

[@Breammummy]

@@ScottSchramm How can you get imovie though. Most are emptied when you buy them. So gotta buy ilife dvd? But then Mac minis dont have dvd drive. why is this so hard.

[@ScottSchramm]

@@Breammummy You can download iMovie from the Apple App Store for free.

[@joeymaps]

I was able to convert my mini dv tapes off my camcorder on my MSI gaming cpu by installing a PCIE chip and then firewire to dv. Capturing software WinDV

[@joeymaps]

However the more I capture from the camcorder, I understand the risk of the camcorder being worn out and the Sony Walkman being resold for $500-1k and that’s a bit much for my liking.

[@joeymaps]

Also depending on the condition of the tapes, not everything capturing as smooth so Mini DV head cleaning tapes highly recommended. Just depends on usage.

[@micheleastolfi6708]

hello scott, you are a valuable resource. anyway, i'm in the situations you speak at the beginning, i bought all the cables to make my chain for macbook with m1 pro, couldn't get it to work then i tried to buy a new cable and it worked! but...i had time to scan 2 tapes and now my mac doesn't recognize my Sony DCR PC110E Pal anymore. I wanted to ask you: I have a windows pc assembled in 2016, which mounts this motherboard "Gigabyte GA-Z97P-D3/Rev 1.1" I would like to try to use it following your video. actually already years ago I used it with a capture card like a usb stick and coloured cables, but that doesn't work anymore and the quality of the footage was very low, what do you suggest me to do? thank you very much...

[@ScottSchramm]

Your motherboard supports PCIe cards, so the one I show in the video will work for you: amzn.to/3w5WFIs

[@micheleastolfi6708]

@@ScottSchramm oh thank you, so i will try this way. if it does not work I will certainly have to change camcorder

[@sl5311]

@@micheleastolfi6708 what happened?

[@NevilleStyke]

If you're using Windows, some older Panasonic MiniDV models, such as the NV-DX100B will only work with Windows Vista or earlier Microsoft operating systems, for firewire transfer. Although the computer will recognise and install the camcorder, when you try to capture video you will get a capture of the sound only with no picture. They all work fine with WindowsXP, as does all the old software. I like WindowsXP; it seems bullet proof!

[@ScottSchramm]

Hmm, not sure why that would happen. MiniDV support should be the same across all OS's.

[@NevilleStyke]

Yes. When I first came across this, I thought that it must be a faulty camcorder but I tried it with many other camcorders and many other Windows computers. IIRC, the Panasonic NV-DS11 will work with Windows7 and earlier but all the other affected models (NV-DX100B, NV-DS5B, NV-DX110B, NV-DA1B etc.) will only work with Windows Vista and earlier (otherwise, with newer Windows OS, firewire gives perfect sound capture but no picture). These are all PAL system camcorders and mostly (if not all?) have the Panasonic DJ-mechanism. If I ever get a Panasonic NTSC camcorder (I no longer have my AGEZ30UP), with a DJ-mechanism, I'll try that but we don't get many NTSC camcorders, here in the U.K.@@ScottSchramm

[@DavidB-rx3km]

I feel your pain - first camcorder didn't work (just wanted to eject tapes), second camcorder - main screen didn't work, so I have to look down the tiny viewfinder, first firewire port on PC didn't work, first firewire cable was broken, second firewire pc card didn't work, second camcorder just didn't want to connect to pc. I've given up and will try again on tapes that have been lying around since 2006 in about ten years time when I have enough patience for this nonsense again. It's taken me two months at this point. Thank you PC gods for the USB port.

[@panamdragonboat]

Great video sir. I use an old Sony Handicam 1394 4-pin to older Lenovo 410s, 420s and some 510s, 520s to run older Dartfish software video capture with time code for rowing regatta video replay timing system. Some of those Lenovo's transmit fuzzy analyzer video while others are OK. Can't figure out why. Alos, the 4-pin ports are VERY fragile. If you force the cable in, the pins will crush to the back of the port and render it useless. The Sony hvr z1 or v1 replacement port mentioned below 12 days ago solves this issue if you're a handy fixer. Will check out your laptop list and maybe try a Dell XPS instead of the Lenovo's going forward.

[@aNYCdj]

bought a 2012 mac mini Catalina for $100 last year of firewire plugged it in loaded life flix and everything worked perfectly no extra cables or work around

[@sl5311]

What kind of camera did you have? Did you lost quality?

[@aNYCdj]

@@sl5311 canon ZR 40 small camcorder but you need a 4 pin to 9 pin firewire cable, its dv quality, life flix can combine into 1 file or break it up into many files to edit what you dont want. The older version works great its too complicated with adapters to use on any newer mac past 2012

[@Breammummy]

How did you get imovie in it? It doesnt have dvd drive? Did it already have imovie installed.

[@aNYCdj]

@@Breammummy $20 on sale at best buy cheap external dvd drive

[@markarca6360]

Both of my old laptops support FireWire (4-pin IEEE 1394a/i.Link) Dell Latitude E5400 Sony VAIO 14

[@markarca6360]

And has Win7 installed in it. My Sony VAIO was my editing rig (has Vegas Pro 11 in it - can capture direct from camcorder).

[@meredith2277]

So I have a MacBook pro 2011 with firewire port. I have been able to transfer video using iMovie, OBS, and LifeFlix. But I am not having success capturing audio. Any suggestions? You seem the most knowledgable and clear in your explanations than others I have seen on YT. I appreciate any ideas you might have.

[@ScottSchramm]

Check the menus on the camcorder for any audio settings. Sometimes there is a setting called format or sample rate and there are usually two options to pick from. Change it to the whatever the other setting is and that should fix it. Towards the middle of this video I show such settings kzbin.info/www/bejne/hmazlauBidJ_Zqs

[@crawford323]

OWC (Other World Computers) made a computer dock which is named Thunderbolt 2 ( not to be confused with Apples cable of the same name) can be found on the used market does a superb job of connecting a FireWire 800 to Thunderbolt 2 Cable ( yes the Apple one) from there the adapter from Thunderbolt 2 to Thunderbolt 3 can be found. Confused yet? This Frankenstein method connected my FireWire 800 Hasselblad vintage digital camera ( circa 2008) to a 2024 MAC laptop perfectly. I believe it is criminal for the industry not to have more of a responsibility for legacy connections. This is borderline on the issue of "right to repair." One would expect new products to fill this need.

[@nathanteach7266]

can i put a firewire pci card in my windows 11 pc?

[@ScottSchramm]

Yes

[@nash0rn0815]

Yes but this doesn’t mean you can transmit videos of your camcorder with it. It depends on your processor. I bought an extension card but my processor doesn’t work with my camcorder. But if you would like to connect other FireWire devices with it, it could work.

[@ScottSchramm]

@@nash0rn0815that is an issue if you’re using Thunderbolt since newer Intel processors dropped support for that. But PCIe cards are still supported. Check my other videos where I explain more about this. You can also read the comments where people reported success using this method.

[@nathanteach7266]

@@ScottSchramm Thanks, wanting to sort a transfer method for my uncle and Auntie for all there precious memories. I think this would work better than a capture card quality wise as another video explained I take out the analog and its all in digital. There cam looks to be good quality and well looked after so would prefer this method. Is there any variation in quality at this resolution for various firewire pci cards. Want something that will get the job done And with decent enough quality, but not looking for that 3 percent that would cost more. Around 20 to 50 budget. So a newer processor is supported with a pci fire wire card? Or better to pick up and older lappy or desktop? Much appreciated help. Nathan.

[@ScottSchramm]

@@nathanteach7266Because FireWire is all digital, there is no quality difference between brands. Spending $20 vs $200 will give you same quality. Some audio people will say the cards with Texas Instruments chips are better or worse for live audio, but I've seen zero difference or proof of that. Just get the card I have linked in the description and it should work for you. It also doesn't matter the age of the computer. A system from 2001 will do just as well as a system from 2024 for capturing the video. Once captured, transfer it to a external hard drive or flash drive and the use a newer computer if you wish to edit or transcode it.

[@c.c.h2348]

If you buy an old Mac, does it matter what operating system it runs or does it only matter if it has a firewire port? Thanks for your videos!

[@ScottSchramm]

For FireWire hard drives, no issues, all versions supported. For camcorders, all versions except 12.3 and 12.3.1. For FireWire audio interfaces Apple has discontinued the Firewire CoreAudio driver with macOS Ventura. This means audio products that connect via Firewire will not work on Ventura and must remain on macOS Monterey or earlier.

[@c.c.h2348]

@@ScottSchramm Just to clarify, so for a camcorder, I should avoid Monterey (versions 12.3 and 12.3.1), but all versions earlier and later will work?

[@ScottSchramm]

Correct

[@maxredcomet]

Luckily, I got some old Lenovo R400 with 4pin Firewire400 port. I will try it and update to you :)

[@Optykz]

So did it work ?

[@maxredcomet]

@@Optykz yes. it work perfectly without any adapter required. only use firewire cable.

[@cosmic_sky_mountain]

amazing trouble shooting video, thanks !! quick question: if i wanted to get an apple laptop for this what would be the best, as a one stop solution ?

[@ScottSchramm]

I covered this at 1:18 in the video.

[@cosmic_sky_mountain]

@@ScottSchramm i found a port on my dell m6800 !

[@cosmic_sky_mountain]

hi scott , how do i get my computer to recognise my camcorder ? im using HDV split 0.77 beta

[@cosmic_sky_mountain]

i tried obs and for a moment got an image from the jvc but its gone now

[@StevenFisher-v6f]

Why can't you use a modern desktop and just buy a firewire card for it?

[@ScottSchramm]

You can but I covered only old systems so it could be done as cheap as possible.

[@BankaiIchigo12345]

What about a modern laptop? With that am I just out of luck period?

[@zxcvbgert]

A great pity that Firewire and USB are in competition those years; otherwise, we might see the Firewire to USB converter chip that could be embedded in the connector of a Firewire to USB cable.

[@ScottSchramm]

Two completely different architectures. I don't think it would be possible to make a converter chip in the cable since it has to do with the way the data runs through the bus/processor.

[@whichinghour]

psa they made more thunderbolt firewire adapters and they’re on amazon for $40

[@ScottSchramm]

Yep, I bought some spares 😊

[@TheNewStoryteller]

This is a lot like me that's working with Windows 11 and XP I kind of think that a USB is handy without the Thunderbolt cord.

[@alexpettie3436]

Hi Scott, First and foremost, thanks for your continued in-depth coverage on these topics. I would be at a complete loss right now if it wasn't for the rabbit hole I'm currently in watching your videos and reading the comments. However, I have a few questions after watching several of your videos on connecting firewire devices to newer M1 macs. I'm trying to connect a PreSonus StudioLive 24.4.2 to my 2020 13" M1 MacBook Pro, which is currently running Sonoma 14.1.2, and record in Logic Pro 11.0.1. The PreSonus has two standard 6-pin FireWire 400 outputs on the rear panel. I'm understanding that in the past I potentially could have achieved this by using the method described in this video: kzbin.info/www/bejne/rmashKx_aLuWjdEsi=PHJw-c7JVUv0CyYI But the FW800 to TB2 adapter has since been discontinued, and the TB3 to TB2 adapter is likely to follow (although it hasn't happened yet as of writing this!) My question is this: I have been seeing some of the FW800 to TB2 being sold on Ebay for ridiculous prices. If I were to purchase the proper adapters, (FW400 to FW800; FW800 to TB2; TB2 to TB3) expensive as they are, would I be able to successfully connect the PreSonus to the my computer to record via Logic? Any tips or knowledge would be greatly appreciated; I'm apprehensive to sink close to $200 on adapters that might not even work. I don't have desk space to follow the old-gen computer method outlined in this tutorial, which is why I'm even wondering if the adapters will work. Cheers!

[@ScottSchramm]

macOS Catalina (version 10.15) dropped support for FireWire CoreAudio, so even with the proper adapter it would not work on your system. Your best bet is to put that money towards a newer audio interface that is compatible with your hardware and OS.

[@TheNewStoryteller]

Hey I got my film uploaded it's Windows XP & Windows 11 Team Advice that you'll like to see.

[@ScottSchramm]

?

[@BankaiIchigo12345]

Or ask a company yo build you a custom product and be prepared to pay thousands for it.

[@ScottSchramm]

Or buy a $20 card and it will work.

[@TheNewStoryteller]

I was right.

[@BankaiIchigo12345]

Using an old computer is not a solution. Finding an obscure product that i still made is the solution.

[@ScottSchramm]

There are millions of old desktops, easily available for little money that will work this, vs you want to spend more money on an adapter that is no longer made and hard to come by and you think that is the better solution? Sure, if you wish.

[@oozabo]

no one is gonna do this like what

[@ScottSchramm]

Look at the all the comments and views on my videos on this topic. Others find it very helpful and have been able to transfer their tapes. There are conversion services you can send your tapes to if you want someone to do it for you.

[@lukasb.8915]

Says u

[@joeymaps]

Thanks!

[@ScottSchramm]

Wow thank you so much! I really appreciate your support!

[@joeymaps]

@@ScottSchramm no problem, my works not done yet, ordered a PCi FireWire chip and hoping that it’ll work with my camcorder.

[@joeymaps]

@@ScottSchramm but wanted to give kudos for your work thank you