How to use silicone molds? 5 product techniques- silicone mould products

[@kimtyndall876]

I know you did this awhile ago but it showed me a lot. I can't work with clay to hard on my hands. Now i can use all the molds i have thank you!

[@KerenTamir]

yes I have a hard time kneading the clay as well so that's why I love resin.

[@benjalucian1515]

OK, I was a knucklehead. I was nervous to try plaster, so since Keren was using glue from a glue gun, I decided to try Mod Podge, plain, to see if it would work. It did. It took a week to dry, but then it popped out easily from the mold, only for me to discover the liquid was too thick and didn't fill in all the details and there were several bubbles, despite me dropping the mold on a table top to get rid of the bubbles and trying to work the liquid into the details. So I decided to try plaster. The plaster set in a couple of minutes and an hour later, I popped it out and it was perfectly cast.

[@KerenTamir]

LOL good job for experimenting, I've tried with things like Gels/mod podge and it wasn't a great success. they are too liquidy, more than the glue gun. Plaster does work best. My favorite is resin but its smelly. glad to hear it worked with plaster

[@benjalucian1515]

@@KerenTamir 😊 Thanks. Very helpful video by the way. Best I've found for a newbie.

[@canadaverydry]

I think that plaster gives superior quality even if more fragile : )

[@harriettezmalloy7182]

Just last night I tried some gel medium in a mold. It is a heavy gel but it’s not called heavy gel, so it’s not as thick as the prima gel you used. But I used it along with an equal amount of a thicker modeling paste, mixed it together & put it in the mold. Great results! And it’s still flexible so if I want to use it on a curved surface I can do so. I want to try that resin you used, it looks amazing. And will try out the glue gun for sure. Thank you for sharing soma y wonderful ideas.

[@tracey8474]

Just a word of caution.. hot glue can damage moulds over time. It can melt and destroy the very fine details so be careful. I would never put hot glue into my expensive moulds..

[@KerenTamir]

the silicone moulds are fine as I've used them for years. The resin I use also heats up, silicone takes heat really well. the plastic ones you're right

[@gail2139]

I am so glad to come across this very helpful video with links to products!

[@yolandagofigure]

Thank you for this it helped out a lot and made a huge mistake using rubber silicone on my silicone molds!🤦🏻‍♀️🤦🏻‍♀️

[@KerenTamir]

so glad to hear!

[@kathyn3978]

Great ideas. I like to also use several layers of wet toilet tissue, packed into the mold. It dries fairly quickly, is very lightweight, and can be painted with watercolors

[@KerenTamir]

OH!!! wow I've never tried do you mix the toilet paper with glue or just plain water? that's a really cool idea

[@kathyn3978]

I lay individual layers in a mold, dab it with a juicy brush with water only, another layer or two, more water, and so on. Depending on the toilet paper, you may not need a lot of water and it could take several layers. I never tried it with a water/glue mix. I usually end up painting and sealing it later anyway

[@kathyn3978]

I should add I first tried this technique after seeing Carol Duval do it on her daily craft show. Loved her show and didn’t miss it when I was home with my babies every day❤️

[@KerenTamir]

that's so very cool!! I'd like to try it! thanks for sharing!

[@CricketsBay]

Oh, wow, I remember seeing that toilet paper into the silicone mold layering. It turned out so amazing. I am going to trying it.

[@carlahubbard7561]

Thank you so much! Just bought molds and was having a terrible time making my embellishments! I like the hot glue method, will try that one first

[@KerenTamir]

You are so welcome! yes that's the easiest one for sure but just remember the glue when it heats up again can warp the piece so don't use your heat tool over it from too close

[@pamelaaudette138]

This is a great tutorial Karen! Thank you so much! I wondered about what other products we could use in those molds.

[@karenferguson7662]

I love watching your ideas..thank you

[@KerenTamir]

Glad you like them! thanks!

[@lzrd8460]

Thank you Karen for sharing this with us. Invaluable info as I want to make some Christmas ornaments with molds I've just ordered online. It's interesting to see just how many different products can be used with silicon molds. Be well.

[@KerenTamir]

You are so welcome! so glad it was helpful!! thank you

[@Heart-toHand]

I actually do have 2 boxes of the amazing casting resin in my house. I love it so much . This is a great share.

[@KerenTamir]

they are amazing!!! I love it too

[@MicheleCervantez]

Thank you so much for making this video! I was in the middle of a project using paper clay and it was sticking too much! I thought I would pop on and see what everyone else was doing LOL!

[@alfaromeomarilou]

yes yes you re right....i used paper clay and fimo clay and have tried so many times to de mold a total object ...but with no success ...any idea please ? thks

[@KerenTamir]

if you're using molds then maybe a mold release agent would be good, I've used a little oil. sorry I didn't see this comment until today.

[@bmwcruise]

Amazing video, Keren. I never thought of using hot glue in the moulds so you have given me some fabulous ideas :)

[@KerenTamir]

glad to hear my friend. just remember that glue from the glue gun melts if reheated so if you're using in a project don't heat set it let it air dry.

[@LindaBellangelkisses]

Ya gotta love those molds, thanks Keren!!!

[@KerenTamir]

thanks Linda!!

[@susangreffard8092]

I've just been introduced to making my own embellishments with the Prima "Iron Orchid" silicone mold, but using the Mod Podge "high temp mini mod melts" (using a mini glue gun). However, love that you demonstrated using regular glue gun sticks (probably cheaper)! Thank you. Painting with acrylic (black) and using wax metallique rubs (antique silver, etc.) creates beautiful embellishments!

[@KerenTamir]

its so much fun to experiment!! just keep on trying with different things!! thank you so much!!

[@erikabrown824]

Thank you. Such great ideas

[@KerenTamir]

Glad you like them! thank you so much!

[@cheryl7476]

Love the idea of using the glue gun! The resin product is at the top of my wish list, and I am going to get it soon! Thanks for the tips.

[@KerenTamir]

thanks Cheryl!! I do love that one!

[@lorrainecrooks8420]

Hi Karen brilliant video. If I was using the amazing casting resin can you use these for mixed media products as in can you colour them with acrylic paints and guilting waxes? Many thanks x ❤

[@lisastaub3368]

Thanks very informative.

[@KerenTamir]

Glad it was helpful!

[@li-beeti2315]

Great video! a tip to speed-up the drying - get it out of the mold and put it in the freeze for about 10-15 m. then let it dry in the open air. this way you can re-use the mold much more quickly.

[@KerenTamir]

wow I didn't know this and I just saw this comment after 3 years because I went to answer someone else's comment. that is a great tip!! how are you?? haven't seen you around in a long time, hope you're well

[@mirabelledemetz]

Merci pour cette démonstration. Magnifique !

[@KerenTamir]

merci!!!

[@jolac46]

Thank you for sharing with us. Love the molds you use.

[@KerenTamir]

thanks so much Johanne!!

[@kimberlysiddons]

Oh my goodness! I have moulds and use hot glue which works great! Bit I’m going to try that first idea you had...how cool! TFS

[@KerenTamir]

glad to hear!! its fun to experiment. thanks so much!

[@SilentSpacer]

Love your nails!

[@1tinac]

Great demo. Thanks for sharing all this information.

[@KerenTamir]

thanks so much!!

[@MegaGrownFolks]

FANTASTIC THANK YOU 😊

[@KerenTamir]

You are so welcome!

[@kellijohnson7093]

Hiya!! Just found your site...and I'm HOOKED...so new subscriber here and looking forward to more videos from you!! QUESTIONS::: 1*I've been crafting a long time, but NEWBIE to using molds. On a EXTREMELY TIGHT budget due to covid-19. Cant afford the Prima molds. Can you suggest a less expensive brand? 2* Have you tried online sources like Wish or Ali Express? If so, what do you recommend? THANK YOU SO VERY MUCH🙋‍♀️😊

[@KerenTamir]

hi Kelli, thank you so much glad you liked the video and I have lots of other videos using them too. Yes you could buy from Ali express. I've never bought from Wish but from Ali I did. yes you could get them from there if you want cheaper ones. they have a lot. just make sure they are silicone

[@kellijohnson7093]

@@KerenTamir TY😊

[@urbanchili]

Nice video, thank you. I was wondering if modelling past would work. I guess it would have to be a little bit flexible for best result.

[@KerenTamir]

Its a good question. I didn't try but worth a try. I think the paste has to be very thick though. it would be a good idea to experiment!!

[@danielletapin2255]

Great it was helpful, I've tried to find that soft clay you used but I think we don't have it in Canada, what was the name of it please?

[@KerenTamir]

sorry Danielle I'm in Canada too but I didn't update the Canadian link here it is: amzn.to/3llXbtS this is the small tub but there's a bigger one too. I just updated the link under the video

[@dargon2001]

Você explica super bem até eu que não sei ler em inglês entendi 90% Parabéns adorei saudações do Brasil Onde posso encontrar esses lindos moldes aqui não tem

[@KerenTamir]

Obrigado Alexandre! so glad to hear. I listed links to where you can buy molds. I'm not sure where you can get them in Brazil but you can order from this stores I listed below the video and they ship to brazil.

[@dargon2001]

@@KerenTamir muito obrigado 🌹🌹🌹🌹🌹🌹🌹

[@sylvielauque6318]

Thank you Keren

[@marytedesco564]

Keren you did it again...I love love love your videos...excellent learning tool..l

[@KerenTamir]

thanks so much Mary!!

[@suzannef3593]

Can you use silicone cake decorating molds with air clay molds?

[@KerenTamir]

Yes you can! as long as its silicone you can. I wouldn't use them for cake afterwards though

[@jwex2813]

May I ask where did you get the silicone molds? Especially the angel

[@KerenTamir]

all the molds are listed below with links. Just not sure if they're out of stock or not but you can check them out.

[@geraldinengia4247]

Thank you so much

[@KerenTamir]

You're most welcome

[@Wisdomseeker_777]

I'm curious if there is a difference in hot glue sticks? I'm using some cheap ones from Walmart in my molds and my molds are coming out with missing parts as well as bubbles, is that normal? I wonder if it's the cheap glue sticks?

[@KerenTamir]

I used the cheap glue sticks too. Are you using a silicone mold or plastic? it should work. just fill it all as much as possible.

[@Wisdomseeker_777]

I have silicone molds, I just had to fill them very slowly and use a toothpick to try to get out any bubbles, that helped alot. Thanks so much for the great content.

[@CricketsBay]

Does anyone have tips on using larger molds? I bought a sacred heart mold on Etsy and the measurements showed it 3 inches tall, flames and heart combined. When I got it, the heart and flames together are almost 6 inches tall. And it's about an inch deep, not 1/2 an inch, as advertised. It's bespoke, so no returns, of course. And I do want to use it, but it takes a lot to fill it and cracking is a problem with paper clay.

[@AbiNomac]

Lovely video. Thank you. Where is the link to Cat Kerr you mentioned about embossing please?

[@KerenTamir]

yes of course here it is: kzbin.info/www/bejne/jnyanpukoMxmr9E and here is a video I made with that technique as well using embossing folders: kzbin.info/www/bejne/fmivnYBud9Wmg5o

[@KerenTamir]

I just replied with links to this but sometimes when I respond with a link it goes to spam. so check your spam folder if you don't see it.

[@AbiNomac]

I got the links thank you. Great links they are too. Thank you for the fast reply.

[@margarethart7101]

This was most informative. I missed the two mixtures - what is the name as I'd like to try this.

[@KerenTamir]

Thank you so much Margaret. the two mixtures come in a package together. the link is listed below for the Amazing Casting resin. Its super easy to use

[@pamelachancellor2526]

Hello Keren, great concepts. Regarding the resin. I am using a resin that dries clear but wish to use it on a round glass surface. Can one de-mold the resin while still soft and form it around a glass ball?

[@KerenTamir]

yes exactly you can take it out before its completely cured and mold it to the round ball.

[@pamelachancellor2526]

Thank you very much, Keren. I appreciate that you took the time to answer. I found you video very informative and it is quite refreshing to see a poster who responds to their fans.

[@raymondraymondp3846]

Pamela Chancello

[@alfaromeomarilou]

nice video ...any tips for de molding easily the paper clay or fimo clay or any other clay from prima moulds ? because upto now all my attempts were with no success...

[@mario48807]

U ARE THE BEST I LOOOOOOVE U ALREDY I NEVER MADE NOTHING IN MY LIVE IM A MAN WITH OUT SKILLLS PLEASE GUIDE ME TO TO SOME PROJECTS AND FOR BEGGINERS WITH PRODUCTS U RECOMEND

[@KerenTamir]

Mario, I'm so sorry I didn't reply sooner. I never saw your comments until today when I went to respond to someone else here. I have so many video tutorial for beginners on my channel. I do hope that after 2 years you found some to help you

[@Elizabeth45840]

Awesome video!

[@KerenTamir]

thank you!!!

[@MariaNyceDesigns]

Thanks so much for sharing this information! 💗

[@jackelinerivas473]

Buenos dias....muy interesante el video...por favor podria indicarme que productos usa en el orden que aparece....gracias

[@KerenTamir]

jackeline rivas hola!! Están todos los productos en la descripción del vídeo. Debajo del vídeo. Puedes presionar el vínculo de cada producto

[@scotishcovenanters]

Once that resin is mixed, are there fumes or an odor? Thank you for video.

[@KerenTamir]

scottishcovenanters no odor or fumes at all. I just used gloves because I didn’t want to touch it. But no smell or anything else.

[@sndygskylr]

How did it come out without dusting the mold first? Thanks

[@KerenTamir]

hi Sandy this is a very old video and honestly I don't remember. I can't remember what I did yesterday lol. However for silicone molds I usually don't dust it, I use the material directly wether its clay, resin or glue gun

[@robinodowd458]

I can't find the link for the video using embossing folder's. Is it there?

[@amberasif5615]

Wonderful video .... I thought resins were clear ... This one is white?

[@KerenTamir]

Amber I'm so sorry I didn't see this question sooner. There's different types of resins. this one is for casting so it turns white. It actually comes in black too. The clear resin is used more for coating or pouring.

[@tararoberts183]

Thank you for the tips!!! With the resin, does it have to cure for 24 hours?

[@KerenTamir]

Tara The resin dries in 10 minutes. It’s amazing. Easiest thing I’ve ever done.

[@scotishcovenanters]

Could I ask what kind of paints to use that will stick to the hot glue one? Thank you.

[@KerenTamir]

I would prime it with gesso first and then paint with acrylic paints. just make sure you let things air dry. if you heat set the paint it might melt the glue underneath

[@rosamariaballadares1769]

Disculpe. No se inglés. Pero ése molde qué Usted presenta es Especial ? ....por qué jamás había observado qué : le ponían silicona Caliente !!!. . Bello!!!. Puede responder por favor, le quedó Agradecida.

[@KerenTamir]

Rosa Maria Balladares el molde está hecho de silicona. No es especial simplemente se puede utilizar silicona caliente en un molde de silicona regular. Tengo los productos que utilize en una lista debajo del vídeo.

[@theresafugate1528]

Hi Karen great video thank you. I have a couple of questions for you. #1 Do you think caulking would work like this? #2 I have about 15 small cameo type molds made from plaster or cement. I bought them fort my primo polymer clay. These molds are not bankable and extremely difficult to use. Would you have any ideas? Thank you so much!

[@KerenTamir]

Hi Theresa, thanks so much!! #1 caulking might work but I've never tried. I think you should experiment. That's the only way I learn myself. #2 I've only used silicone molds. I heard they are the best. the molds are soft and mouldable that they work with so many products.

[@theresafugate1528]

Thanks for your quick reply Karen. Yes I will experiment. Also I love using the silicone molds from Hobby Lobby for making chocolate candy, they are like 1.99 and 2.99.

[@kellijohnson7093]

@@theresafugate1528 have you tried a cooking spray like PAM? Also, I read or saw about using corn starch or talc. **PLEASE** GOGGLE these ideas beforehand since I've NOT TRIED THEM🙋‍♀️😊. I don't want you to ruin your molds!! God bless you and yours and good luck

[@rosamariaballadares1769]

Disculpe. Usted demuestra, qué pasta se utiliza en el molde. Mi interrogante es : Es Molde especial ? O..en los Moldes se puede echar , Silicona Caliente ?... No lo derrite ? Gracias.

[@KerenTamir]

Rosa Maria Balladares es un molde de silicona. No es de plástico. Se puede poner silicona caliente en cualquier molde de silicona pero no si el molde está hecho de plástico

[@jewelrygrace9438]

I just bought silicone mold n wondered if I can use cold melted glue in the mold

[@KerenTamir]

I don't know I haven't tried but hot glue becomes cold and dries quicker than cold glue

[@jewelrygrace9438]

@KerenTamir it's a cold, hot glue gun. If that makes sense. The gun n glue sticks look the same, but the glue coming out of the gun isn't as hot as a hot glue gun. I tried it with a cold glue gun. Glue sets up too fast. Maybe if my molds were larger n not so intricate, maybe it would work. Thank you for responding.

[@Nova_the_starcatcher]

If I wanted to use the first amazon resin to make frames that would then be turned into magnets, does the plastic it creates feel sturdy enough to be a frame? or since it is easily cut do you think it would be easily broken in daily use? -- Or what would you suggest would be the strongest material to use to make a tiny frame?

[@KerenTamir]

Katelyn Stewart yes it’s super hard. And the thicker it is the sturdier it is. If the frame is very thin it might break. But that’s with everything.

[@candi6642]

Thank you so much for all the cool ideas! One question, would modeling paste also work? That's the only thing I have currently, besides the hot glue. Also, how long would something like that need to dry? I'll definitely end up trying the resin, that looks fantastic, but just thinking of trying something now. I recently found your channel, and am really enjoying it, because it's showing me many new ways that I can still be creative. I'd been a bit discouraged from painting/art for awhile, because I have CRPS, which is very painful, and it has been getting worse in my hands, making detail work difficult or impossible. I'm also terrible at drawing, but now it hurts too much to even try. So, mixed media in general has been exciting to learn about, since it seems to be less challenging in that way, while still having potential for lots of creativity! Stencils, molds, and stamps can do the drawing for me! I appreciate how often you mention which things are difficult or easy with hand pain. Thank you again!!

[@KerenTamir]

I've only seen modeling paste work on very thin molds and its not the best. You could try but you might be wasting a lot of it. I would do the glue gun if you don't have anything else. you'll be happier with the results. I understand completely understand what you mean about pain I've suffered from arthritis my whole life. I made a couple of videos on the subject, they are very personal and they talk about exactly what you described above. Mixed media makes it easier for sure. sending love and healthy blessings. Here is one of the videos I meant: kzbin.info/www/bejne/Y6GolJiEptyhqKs

[@candi6642]

@@KerenTamir Thank you, I'll check them out! I also appreciate that you talk about mindfulness. It helps tremendously, and art can be a great way to practice. I still plan to watch those too, just have been focused on getting a crash course in these techniques for a project I need to finish in time for a friend's wedding next month. ☺️

[@KerenTamir]

so glad to hear Candi, I really try for my own health and well being. it helps a lot.

[@maryamyahya5345]

Can we use mould for bar soap

[@KerenTamir]

yes you should be able to but I dont' know as I've never made them

[@MRVICTORCRAFTER]

SO COOL!!!

[@KerenTamir]

thanks!!!

[@cathiyool3971]

Hi Keren, can I ask what brand of resin did you use Please?

[@KerenTamir]

Hi Cathi, I always put the links to the products underneath my video. Here is the link for the Amazing Casting Resin: amzn.to/2qiVJ0V [ Amazon US ]

[@cathiyool3971]

Keren Tamir sorry I didn't see that, thankyou so much x

[@KerenTamir]

Cathi Yool no worries. It’s all good it’s always easy to miss. But I always put the products I use in the description area of the video. With the links.

[@rosamariaballadares1769]

Por favor le pido : puede traducirlo !!! No se ingles y observó qué es Súper INTERESANTE su Explicación. Gracias.

[@KerenTamir]

Hola Rosa, no puedo traducir porque no tengo tiempo para traducir todo. pero si ud me quiere preguntar algo especifico con gusto le explico.

[@rosamariaballadares1769]

@@KerenTamir Gracias.

[@SandraSantos-rp1wp]

That you cery mych.

[@sortedlife4332]

I have emoji silicon moulds

[@mario48807]

I M SO CONFUSED ABOUT IT HOW TO START SOME MANY PRODUCTS AND POINTS OF VIEW A SAME TIME WHY DON U DO STEP BY STEP PROYECTS PLEASE

[@li-beeti2315]

Great video! a tip to speed-up the drying - get it out of the mold and put it in the freeze for about 10-15 m. then let it dry in the open air. this way you can re-use the mold much more quickly.

[@KerenTamir]

great tip!! thanks so much my friend xo

[@li-beeti2315]

thank YOU for so much inspiration and sharing your tips and talent