How to use the Airfoil Generator Tool in ~ Autodesk Fusion 360.

Learn how to use the Airfoil Generator tool in Autodesk Fusion 360 to make approximate airplane ribs and wings.
The model shown here in this video is an imaginary one just to show how the Airdoil tool works.
I hope you enjoyed the designing process and the model.
if you enjoyed the process and model, then hit subscribe and like the video. and don't forget to comment on your views on this model and process.
-----------------------------------------------------------------------------------------------------------------------Previous video links:-
1) How to do thermal and static simulation on the cantilever and Simply Supported Beam using Autodesk Fusion 360.
Link:- kzbin.info/www/bejne/Z2qqZJSnmbSEaLM
2)NASA GMAT Apollo 8 periapsis and Apoapssis Sequence Tutorial
Link:- kzbin.info/www/bejne/f3OQo4iIZbhoo9U
3) Perform Static Stress Simulation using Catia v5:-
kzbin.info/www/bejne/g6SYXpuYmc9pncU
4) Design Turbine Blade:- kzbin.info/www/bejne/lauWoaqHetWkp6M
5) Design Diamond:- kzbin.info/www/bejne/pXSYi6uvjrx1g5Y
6) Design Airbus A350 part 1 (Fuselage):- kzbin.info/www/bejne/hXrclaGurK2Mb8k
7) Design Model Rocket Part 1:- kzbin.info/www/bejne/aGq3YXdraLR3aaM​
8) Design Model Rocket Part 2:- kzbin.info/www/bejne/fILGfqyPl8Srla8​
9) How to create boeing737 NG Wing design- Using Autodesk Fusion 360 :-
kzbin.info/www/bejne/hYiufJttpbpkpZY​​​​​​
10) Designing of Thomas the Tank Engine- Using Autodesk Fusion 360:-
kzbin.info/www/bejne/Y4eso6ewZtlla5Y​​​​​​
11) Design a small aircraft part 1:-
kzbin.info/www/bejne/aKWTYaN3e6dnfLs​​​​​​
12) Design a small aircraft part 2:-
kzbin.info/www/bejne/pZi9fqiHrNloic0​​​​​
13) Design a hand wooden glider:-
kzbin.info/www/bejne/f4rKdHRugb2ga6s​​​​​
14) Design a Wooden Study Table:-
kzbin.info/www/bejne/r4KllZ-YZZVorLc​​​
Thank You :)

[@emreyaln7780]

u are a true savior for me...

[@OmegaFusion]

Thanks :)

[@reddwanjahir6364]

Would you be able to make a guide on how to use Airfoils Generator tool to produce a propeller?

[@hmsroyaloak-wn1mb]

hi, is there any possible way to use this on a Mac?

[@chucksdesk]

I am new to CAD but progressing. I am trying to build a wing with twist in it so it ends with the tip at a lower angle than the root. Can you offer suggestions. Thanks

[@もとこ-s5j]

I am not sure though i bet it works by making two different sketches, one for the root and one more for the tip. you generate the airfoil how you want it to be on both of the sketches and use the tool called "loft" to connect the two. In your case, maybe generate a high angle airfoil on the sketch on the root, and a lower angles airfoil on the tip. I hope it works for you

[@chucksdesk]

@@もとこ-s5j Thanks for replying. I had airfoil templates for the airplane I was trying to model, F106. The templates were for the root to the tip. I used the offset plains for each station and traced them as they were. I then use the loft tool. The wing formed with the twist at the tip I was looking for.

[@もとこ-s5j]

@@chucksdesk glad it worked!

[@JohnJaggerJack]

Why does the install file has a "utorrent bundle_file" executable script?

[@salva1750]

thanks

[@ryanstewart8890]

did you figure out how to loft the ends?

[@evgenigeorgiev1241]

Great video, thank you for posting. Any idea how to combine multiple airfoils with this plug in?

[@OmegaFusion]

yes you can, just makae sure to offset the planes then do it.

[@alldaeng-ku4mb]

Matamu thankyou

[@RevanBamoki]

How do i use my own airfoils with this in airfoil tools? It converts what I want to csv and not dat

[@APFS-DS]

it just says failed, plz help

[@samkg1964]

the parting events irpin

[@fabiananguiano1552]

The tool you´re using is not currently working :(

[@maximumdeadpool4037]

imma be honest this video is bout to get like 5-10 hour of watch time from me alone

[@dougskucas5004]

The music doesn't help. A slower pace with a good narrative would.

[@dgcushma]

Thank you for your work but ... First thing, please slow down to half or a quarter as fast as you were going. You aren't the first one to make this mistake, in fact, most early content creators race through their video. Please remember, a user needs to ponder a point of interest you just made but at your speed, many are lost as soon as they see something they haven't seen before. Second, it is also very common to shake the cursor back and forth to make a strong point but it is painfully distracting from what you are trying to teach. Third, if you intend viewers who are not familiar with your language, find a way to include explanatory text to replace your vocal explanation. If you are using a good editing tool, you can translate the explanatory text to several languages you hope your audience will understand on separate tracks. Hope this helps. You obviously have some very interesting information that I would have loved to understand but I gave up about two minutes in. Sorry.

[@sotm2]

Ever heard of telling people what you are doing? Would be much more meaninful if you did!

[@rc_farmer4866]

.....I'm sure this is a great tutorial but at the speed, you run thru this, make it almost impossible to follow

[@alldaeng-ku4mb]

Lu buat video apa sih?? Gk jelas Mending gk usah bikin video tutorial gitu luh gk bermanfaat org pada gk ngerti Gk ngomong bisu apa lg sariawan kau buat video tutorialnya??

[@samkg1964]

the parting events irpin