How to use The Behringer 1204USB 12-Input 2/2 BUS Audio Mixer with USB/Audio Interface

[@Trillsam]

Hello, I have the same mixer. What kind of stand is that, the mixer? Do you have some photos or a link? Günter

[@expertisland]

*This is the link for the stand on Amazon **amzn.to/3dcYSse** it is PLPTS55*

[@Trillsam]

@@expertisland Thank you!

[@jasonjellie9342]

I have a question. I have a Behringer audio interface that I want to hook up to the Behringer Via left and right mono input to change it to stereo via two trs cables but as there seems to be only one balanced or unbalanced input on each mic, am I right thst u can’t get stereo input? I just can’t find the mono inputs

[@DarthDimSum]

Finally a detailed and clear explanation on this particular mixer. I have had it for 4 months and found out so many things I have been confused about through this video. Thank you so much sir, you have really helped me out!! Great video :D

[@AndySmallfry]

Same!! I want to but a compressor and I thought I was going to new a pre amp this, that, blah blah blah but then i watched this and remembered the sends.

[@MrSchwein]

Any idea how to plug a vinyl player into the behringer?

[@hannaperina9089]

@@MrSchwein Tape In

[@beckybarnes8875]

I was a radio DJ for the first 10yrs of my career and I have never had so much issues with a device. I used to have to use patch cords into the phone line to put the church on the radio and that was easier than trying to get this to work on my laptop.

[@JustenHarden]

You, sir, are a legend. Thank you for this!

[@expertisland]

Thanks

[@Productum]

Very informative, I bought mine (Behringer Xenyx 302USB) a few weeks ago and I'm still happy with it! :)

[@C01dEyes]

When I unboxed mine yesterday those rachmanin plates slid right out from fell on my foot... Hurt like hell and it was a very unpleasant surprise and yet very pleasant to see a the same time

[@dagostinipoetryproject9047]

I would like to know if you really published an in-depth video afterwards where it is explained how to select the effects and set the various parameters. I bought this mixer, but I can't figure out how to use this function, thanks!

[@DailyFrankPeter]

Nice. Thanks for the rundown of the knobs/ports - it's more comprehensive than the quick start guide. :)

[@robertjbroadhurst3860]

What Behringer products need is a slow start guide, my 2 penny….

[@bravohorn5]

Let me add that this video was very informative, and the 1204 does actually produce some decent sound.

[@RickRijuanaPro]

I've been using this for the last 10 plus years. I'm looking to buy the QX 1204 that has 100 DSP effects. I would buy this over the basic audio interfaces in its price range.

[@MASTERFTW]

Thank you! I have had this product for a long time and there was a few things I was unsure of like the FX knobs and you explained everything very well. Very good video and keep up the awesome work. Now knowing it doesnt have FX built in I may look into the X1204USB which I believe has it built in. I may not needed but now I know for sure mine does not.

[@kenlane6655]

It actually has 16 effects built in, reverb, pitch etc.

[@MASTERFTW]

@@kenlane6655 Really!?? If they are built in without any additional hardware, how do I access them? I am confused on that feature. Any help or links to other videos would be greatly appreciated! Again thank you for this helpful video.

[@TDK-Ouros]

@@MASTERFTW Dont get confused by that comment :) There are 2 versions of the xenyx 1204 usb. One with a little screen where you can set up the FX stuff and one without it. As far as I know, the 1204 without the screen does not have the 16 effects built in.

[@Yalltalkaboutbruno]

I’m trying to use auto-tune with that mixer, but I’m not able to route to audio from the computer USB to main, I can only listen to the mix through the phone outlet. How should I set it up so I could listen to audio with effects from the usb to main mix?

[@tech_nick0]

RIP Focus

[@mrf8358]

🤣🤣🤣

[@QuimFont]

Something I don't understand is sending from aux1 to aux1 (the third red knob on 8:38), it only generates a feedback loop. It would be logical that it would be from aux 1 to aux 2....

[@pattheitguy]

Well, you kind of glossed over a few important things. The biggest is that the Aux (Red knobs) and FX (Yellow knobs) are not, repeat NOT the same. They are not "2 effects channels". I appreciate the video, as I bought one, but readers may not know the difference between the signal TO these 2 outputs are not the same. If you look closely, you will see that the Aux are labelled "PRE" and FX are "POST". Simply put: "Pre" means that the signal going to that 'bus' is BEFORE the faders. Adjusting the faders has zero effect on the signal strength/level. "Post", as you have guessed by now, IS impacted by the faders. If your fader is all the way down, NOTHING is sent to that bus. When to use which? That is a whole 'nuther discussion, but the point is that: . The red & yellow knobs are NOT just 2 busses for effects.

[@expertisland]

That a good point with the ( "PRE" and "POST" FX ) That is important I have talked about it on other mixers but missed it on this one.

[@kjemradio]

Two gripes I have with this mixer (and it's related family X1204USB, Q1204USB, etc.) is the mute to alt 3|4 and the USB signal. First I would rather have a separate clean mute button to kill the entire signal and a separate Alt 3|4 button. With the way it's designed you never get true muting. The only way on these mixers to fully remove signal from the mic pre is to pull the faders down completely (1-4). While I get the combination probably saved $10, I'd prefer the mute and alt 3|4 to be independent and spend that extra $10 for that feature. Also the USB is stereo ONLY. It will not multi-track record, and it does sound like dog crap when you try to record over it (know this for fact as I was helping some friends of mine set the Q1204USB mixer for their new podcast. It sounded VERY tinny over the internet, whine in our headphones it sounded amazing) So bare that in mind and use the line out on your computer to the mixer).

[@davel8116]

Thanks for that input. The only 4x4 USB Mixer I could find was the Allen and Heath, but they don't have compressors. Have anything better you can suggest? I'm looking to hook up to 2 computers a single mic for various streaming and minor production.

[@Marcos-bx8oy]

old comment but have you found any affordable mixers that will do multi track record? just picked this one up and i realized it was only able to pick up 2 channels

[@micheal49]

"stereo only"???? It is to laugh. All I get out is mono. How the heck do you get this thing to do stereo output?

[@Seej1982]

@@micheal49 panning the inputs in the stereo spectrum.

[@RonRothJr]

I get great stereo sound through USB, but only if you use ASIO in your DAW. The Behringer site has the drivers for this protocol.

[@evanball]

If I currently have an AI say a Focusrite Scarlett Solo, would purchasing this, therefore, replace that?

[@Nameback]

Seconded, I'm in the same boat and also curious.

[@yuheny0]

It can, until you want more control over the number of inputs and tracks you send out into your DAW. So, for example, the FS Scarlett Solo has 2 inputs, it can then send 2 tracks out into your DAW and you can edit those 2 tracks individually. On the other hand, a mixer will always output 1 stereo track. Meaning you can only edit that track alone no matter how many inputs you have. So an interface outputs a number of tracks that is equal to the number of inputs, where as a mixer does not.

[@aRandomHomelabber]

Stil usefull after 5 years! got this second hand for only 50 euros!

[@reinhardtathletics2617]

We have this mixer and sometimes get an "echo" sound when we broadcast. It is random - but I was not sure if there was something that we could turn off that might be on that is causing the echo effect.

[@andythai5492]

You mentioned that you will have a separate processor hook up with this mixer, can you please post the link for that video thanks

[@alyctro8158]

What i don't understand is does it function as a regular audio interface in a DAW? If so, does it cause lag or any interference? I want to replace my focusrite with something that has more recording slots and a TRS out.

[@jonathankrantz9263]

I'm still getting my head around mine. If I've got an FX rack attached and just ne mic for kareoke... Is there a way I can arrange the buttons and dials so that the singer can have the fx in his or her ears and there's a raw recording going to my PC? Ideally another out too to some speakers in the room too

[@kimin6336]

what channel control the signal from usb input?

[@DarrellNelson]

Hi, I have the XENYX 1204USB and I can't seem to get the audio OUT to my MAC BOOK PRO working for podcasting. I can see the CODEC 2 in the "Audio Midi Setup" but the settings are grayed out. I would like some instruction if possible. Thank you.

[@stevenblake6355]

I have the HENYX QX1204USB with the effects generator. Somehow, I have suddenly stopped getting audio in my computer. Have unplugged and re-plugged several times and my computer is still not seeing audio. Worked great for 6 months. Any suggestions?

[@luizantoniodossantos4126]

Thanks for sharing a cristal clear explanation!!!!

[@GTheoMedia]

Any idea why it shows on mine on the clipping meter dots on the Main Mix volume (the dots are lit only on the Left) but it gives me sound on both left and right.

[@MrLarryl79]

you should show the work of the USB part as well.

[@guitarstella1]

thanks mate i was stuck , just wonderd what is that stand called the mixers on

[@spiritofzen7022]

I’ve just brought this mixer and I’m having trouble getting effects into my wireless in ear monitor , I’m a soloist using backing tracks so am I best using aux 1 & 2 or would the headphone option be better, thanks

[@SuAmigoElilegal]

Question on LEds indicator. Do this lights Indictators indicate just decibels levels or do they also indicate volume levels, let's say if I have 2 instruments on 2 different channels , if both leds indicate 4 ,do they also mean they are at the same level control ?

[@dannylharper6889]

Thanks for the video. I was wondering what is the voltage of the phantom power?

[@tobiaswinter1358]

Great video, thank you for that! When I hook up the mixer to my Macbook via USB, I only get to hear channels 1-4 (drumset). Is there an option to route 5&6 (backing tracks, rest of the band mix) to the USB at the same time?

[@robmitch1963]

Thanks for the review. Helps a lot. And it is a really good unit. Cheers

[@HipKat82]

I have no idea how to hook up my dj controller , i don’t know is where it goes into, also where speakers plug into. I’ve tried everything no sound nothing

[@dislot]

Ive been having trouble with mine. The main mix lights weren't coming on at all (not very tech savvy when it comes to audio equipment) I don't know what I did but i just copied how you had your board set up and now it lit right up. Wish I watched this like a month ago

[@deepak2268]

Very helpful video..am not getting the tonal control effects on the RCA Output..pls help!

[@veerchasm1]

Great pace and explanation. Do more recording videos

[@swimm68]

would love to know what make your stand is please

[@emiljanocakalli1778]

hi. im not so good with electronics. How do i connect this with a microphone wifi reciever so i can use for karaoke?

[@bpcborja]

I plug mi phone to the rca input. How can I do to send that signal to the rca output?

[@hindihitsl974]

Hi where I can get this mixer revolving stand .please advise. Or send me a link . Thanks

[@RobertGossCreator]

Thanks so much for a great review I love the Beringer mixers they work so good

[@missmeikecomedy]

Can I connect a zoom recorder to it and if so which inputs? That’s where I’m lost. I assume speakers connect to the xlr in the back.

[@tanyathompson2319]

What’s the stand called that’s holding the mixer

[@StevenPatrick]

why haven't you talked about how this mixer can hook up to a cell phone I saw another video on this mixer and they were claiming you can accept the mixers sound into your cell phone for better audio while recording cell phone video can you do that with this mixer????????????

[@shahnaz807]

Can I use this q1204 USB for live broadcasting

[@MisanthropicWorm]

Maybe next time use the marantz. It sounded great here

[@WHNorthcote]

Would this work in a small community style radio station?

[@zuitzooter]

Where do I get a stand for the mixer like in this video?

[@darylfields43]

how do you connect a pioneer ddjsr2 to behringer qx1204

[@bwn60]

Have a question that I don't think you covered concerning the USB part of this board. Is that an input or an output? Or is it both..?? Thanks

[@expertisland]

this mixer is a 2x2 ( 2 input L/R from the PC and 2 outputs back to the PC

[@DJBessVA]

I m attempting to use my ALT 3-4 as a monitor for a DJ hook up. I have my mixer hooked up to the unbalanced line in "5". For the life of me I cannot get any sound from ALT 3-4. Im sure im doing something wrong, just dont know what.

[@S.ARIF_2020]

Nice Video and good first introduction to the board, but you might want to double check, of your shot is in focus :)

[@georgestan1423]

Where can connect the two speakers exactly?

[@dantheman_youtube]

Hi - is the a fader/slider which controls the audio level inputted via usb or is there a fader which can be set to control the usb input level? 😎

[@husseineltarras7526]

Can you use the rca outfit out as your main output?

[@kevingallagher9652]

hi just purchased a behringer pmp 500 cant find any tutorials about this mixer any chance you could do one cheers

[@jeffersonpantonia2061]

Hi sir in your opinion the behringer qx1002 USB can i use external audio source to my Samsung Galaxy a70? Android 9 version

[@morgan_westerholt]

Hey there, i hope somebody reads thos after 2 years, but do you think this mixer is capable of running a 5.1 surround sound system and still be able to volume controll every single component? The mixer has only 4 mic outputs, but would it still be possible?

[@vortexproductionyt]

How can i connect a subwoofer to the alt

[@user-dj7cp9jg9m]

Thanks for the review. What was the stand used on the video?

[@beautyler4339]

He talks about it at 11:30

[@Texas1FlyBoy]

Pyle Portable Folding Laptop Stand PLPTS55

[@PhatMc]

Is it class complient with mpc one ?

[@therighteoustv]

Layman's question please- Can I have up to 7 or 8 inputs on this mixer? Say 4 Mics, 1 electric bass guitar, 1 keyboard and 1 electric drums set. Thank you

[@iloveACID]

Yep

[@girlinagale]

What's the 2nd red knob, To Mix- Send 1, to the right of the Aux Send?

[@jaleelrisam]

Hi sir how can put delay?

[@jimmyraj9626]

What cast 4 chanal audio mixer sir

[@emilioricordi207]

I'm looking for a decent mixer for a beginner at least 6 channels, sliders, usb, recording to laptop, sliders etc..any recommendations ?

[@rikeyfrog]

Does the usb also work as na mic output. like does it send audio to your pc.

[@ghostwriter1869]

Yes I use it as a USB audio interface

[@nadiajoline]

I just bought the Xenyx Q1204 and found out it doesn’t have the built in FX. Pretty disappointed as it’s an important factor for me. I don’t understand why they have all those different versions as they’re in the same price range! The X1204 and QX1204 both have the effects build in. Why would they make versions without the effects, I don’t understand. I’m hoping the shop accepts an exchange even though I kinda damaged the box.

[@sergecampeau3610]

I bought this console 6 months ago. I barely understood what you were saying. I am interested at the monent only at the analog functions of the device. I use the RCA jacks as outputs so far (I thought that XLR was only used for mike inputs before today). I have another device that needs to be connected in the RCA inputs. How is it possible to get that signal mixed in the main mix with a mic in the input 1 and get the whole thing in the RCA out jacks??? I tried every possible buttons and this does not work. The manual says nothing. This is really not intuitive! I don't have any cable for the XLR outputs, this is not standard in my world. Do I absolutely need to get XLR to RCA conversion cables? What it the advantage of the XLR?

[@hiphopbeat2571]

HI thanks for this vidéo ! I like this support for the mix table. A link for buy this support ! Thanks you

[@antoineinniss5586]

What about the noise floor...how clean are the preamps in that mixer ? Can you honestly say that I can use this mixer to record voice over and won't have to worry about hissing/self noise ?

[@expertisland]

I reply to your question in my Q&A video kzbin.info/www/bejne/iGWbhoOBqrZpqpY

[@okbenorhabari]

Hey! Is there a way to make the headphones output be mono?

[@GaryRSpicer]

Does anyone here know what size rack ears to use for the x1204usb mixer? Thanks

[@dariusdjcrack3290]

So, for using effects on microphone, I need to buy an effect controller?

[@MASTERFTW]

Seems that way. I was always wondering about that and he explained it well. There is another variation that I believe has the FX built in but that would be the X1204 USB and this one is just 1204 USB. The X1204 seems hard to find these days and is pricey

[@jebint1444]

Can directly connect to computer or require any audio interface additional

[@titouanchevojon7742]

Both option are available

[@dereksmith8318]

hi where did your mixer stand from

[@bartonet]

I plugged in my pc in 2-track usb but i want to set the volume on the main mix, how can i fix this

[@gaspardboesch]

push the usb red button in the control room, and root the out of the control room in 5/6, with 2 jack cables.

[@bad_at_accuracy_]

after a couple years of my x1204usb being left ON probably 98% of the time, it randomly has some static/white noise. This goes away with either disconnecting and reconnecting the usb plug, powering off and back on, or applying pressure to the case on the top right corner..... opening it up is not a good idea unless youre a savvy person, there is wires that need to be disconnected if you wish to fully separate the top from bottom (after removing near 20 screws). I cant seem to have my mic adjusted where it needs to be and also not hear my pc fans and keyboard typing, but i think thats a different issue. past that i still get consistent compliments on my mic quality/voice, as discord and obs allows more noise suppression/gate and extra compression but im not in a booth for next level quality..... ANYWAYS, thanks for the rundown on what all the other things do that ive ignored for the past 2 yrs, hopefully i dont kill mine with prolonged heat damage lol

[@Wordsmith_89]

Same Problem here with the static. Problem is when I power off and back on it crashes my recording software. I did read somewhere that the PC may not be grounded properly. Haven't tried that solution yet.

[@darylfields43]

How to connect to My ddjsr2 pioneer controller

[@JordanREALLYreallyOK]

Hey great rundown! Does this board offer each track as a separate channel through USB, or is it stereo mixed only?

[@houalee9101]

Only stereo mix. The USB doesn't recognize each channel as each own separate channel. Which means, whatever you're recording through each channel, it will capture it as a whole -- no differentiation between the channels.

[@justinlloyd2787]

Do a video on what's the best 15 inch speaker for the price

[@encyclopaedia4853]

da

[@kjemradio]

Sound is subjective. You need to go to a music shop and test out the speakers in person so your ears can be the judge.

[@gambello1195]

Can you record all the tracks separately same time on a daw?

[@expertisland]

No, you need an audio interface for that.

[@gambello1195]

@@expertisland ok, my near retailer listed it as an interface and the usb input confused me. Thanks!

[@oysteinsoreide4323]

@@gambello1195 It's an interface, but you can only record a stereo mix to the computer.

[@olegorekhov1465]

@@expertisland Does it record only the clean signal to your PC or the effets snd EQ settings are also recorded? Thanks!

[@MTVIDEOSCENE]

Really good and understandable even to the novice learner.

[@mattallen5228]

I have no idea how to get this to record audio onto my computer

[@kaylasaalz]

Matt Allen me either

[@ImChief]

Marissa Salazar I can get mine to record but it will NOT record as separate tracks. I have no idea what to do.

[@barrythomson4210]

@@ImChief It won't you will have to do it manually in your DAW.

[@maiabonardelli177]

Ils if I’m too late to get an answer but please if someone cld help it wld be so appreciated. My boyfriends bday is in 2 weeks and all he’s been talking abt for a year is a mixing table. I know NOTHING about this but this one seems good for a reasonable price. Is this one very recommended? Also does it connect to fl studio? If you got this as a gift considering you did not pick it out yourself for your ‘need’ would u be happy? Is it worth it is it good??

[@nannaface98]

How would i find a mic with this type of plug

[@EzyyTV]

its xlr microphones

[@blazeking2751]

Best one for a good price is an Audio Technica ATR-2100. It has XLR and usb.

[@Helene_TheCoolAFVegan]

I purchased that unit April 9th. It stopped working end of July. Apparently it's the USB connection, it needs to be sent for service. Not impressed with this as it's preventing me from recording in my home studio... my clients will go elsewhere if I can't provide voice. Should have purchased the upgraded version.

[@thomasorta4297]

Can I use this device for radio station online?, what about latency, is low?, thanks any help will be greate

[@ericksonpierre3780]

Yes, but you may need a bigger channels. Any ??? I'm here to help........

[@thomasorta4297]

@@ericksonpierre3780 what channel?

[@TheHoot70]

Can I plug in music to my mixer through the "mic" xlr input?

[@csbkfrombrisbane]

Does this have phantom power 48 V ?

[@jaehobk1275]

yes it has the switch is at the back

[@nunu4555]

thaynk u bro💟👍😁

[@mikebreitling6800]

I appreciate the overview, well done. my question is when I use it as an interface, while recording it peaks out the cpu. when I use my old interface theres no problem. wondering if its the board or computer "intel e8400 processor" 3.0ghz idk

[@expertisland]

I Answer your question in this Q&A Video kzbin.info/www/bejne/amerhaqIjsxlbsk

[@Boomer717]

Anyone know how to get this to work on pc for streaming/recording?

[@pedroleao6068]

im having the same problem trying everything and nothing works :(

[@makersengineering530]

are you sure you are explaining for the beginners ? explain with demo would be better?

[@zeitgeist909]

that looks like its made of cardboard? is that a real unit?

[@SynergyGamingTV]

Has a USB port, which is the most important connector on that board and doesn't even mention it.

[@expertisland]

Your right I filmed this video over a day between customers and I missed the USB

[@WDCallahan]

Mentioned USB input @5:08.

[@Deactrals]

@@WDCallahan damn you got them 2 years later

[@zrellll]

Review more generic/cheap mixers please like "Ammon" brand

[@encyclopaedia4853]

da

[@kjemradio]

Why? You get what you pay for in mixers. You buy cheap and you get cheap (lots of hiss on the channels, knobs that strip easy, faders that stick or break, etc.) Save your money and get a Behringer. They are affordable and actually sound/work well. Save even more and go Mackie, PreSonus, etc. What works for some, doesn't always work across the board. 40 years in music tells me so.

[@couchcamperTM]

@@kjemradio lol a few years ago Behringer was known as Noisinger and it was the cheap stuff nobody recommended. I know, that changed, but your comment reminded me of the old days - and made me LOL

[@mooseydeucy]

The commercials really disrupt the tutorial flow. Bring back KZbin of yore please. Thank you