How To Use the Bonny Doon Hydraulic Press Deep-Draw Kit with Phil Poirier

Join G. Phil Poirier, owner and creator of Bonny Doon, as he introduces and demonstrates the Bonny Doon Steel 6” Master Deep-Draw Kit for your Bonny Doon hydraulic press. Watch as he effortlessly turns a brass disc into a deep-drawn vessel without compromising the thickness of the sheet all throughout the design.
Shop some of the suggested products based on those seen in this video:
Bonny Doon Steel 6" Master Deep-Draw Kit ow.ly/XA9o50GkPSS
Bonny Doon 20-Ton Mark III Electric Hydraulic Press & Ram ow.ly/5a9250GkQma
Jeweler's Brass 6" x 12" Sheet, 18-Ga., Dead-Soft ow.ly/R5Si50GkQhv
BurLife® Liquid Lubricants ow.ly/CLr450GkQkT
Steel Ruler with Conversion Chart ow.ly/DVq050GkQnj
Rio Grande stands for makers who create with their hands and their hearts and who are courageous enough to make jewelry their livelihood.
Connect with Rio Online:
Visit Rio's Website:
Subscribe to Our Channel: ow.ly/dAbu309U7eg
Find Rio on Facebook: ow.ly/DpRd309U63Z
Follow Rio on Twitter: ow.ly/wdtU309U6oF
Follow Rio on Instagram: ow.ly/eu5A309U6vM

[@olukayodepaul7070]

Thanks a lot for clarity.

[@corystreat8037]

Please follow up on this process and tell us more

[@janlee2844]

Very informative. How we seen the complete video.

[@RCStudiosca]

Very nice. Need to save up for these.

[@GNP3WP3W]

Damn, that's one big bullet casing you're making!

[@mecano_s4486]

If I want to press and obtain a diameter of 120 mm, what play should I leave in the bottom hole, knowing that the thickness of the sheet is 1.5 mm thick?thinks ♥️

[@srpracingdevelopments3728]

All of the centreing time and clamp tightening concern would be simply solved with an equaliser gasket. Contact me if you want to know more.

[@jackberry5757]

The link below to the deep draw kit at Rio Grande is not the same as the tools you demonstrate in this video. What's up? No longer available?

[@RioGrande1944]

Thank you for the comment! Yes, here is a link: ow.ly/XA9o50GkPSS

[@josearigojacobojacobo1434]

un gran maestro muchas gracias 😀

[@RioGrande1944]

You are quite welcome.

[@murugavelsen]

Super

[@srimanduindustries9426]

WHILE DEEP DRAWING PROCESS IN WALL THICKNESS WHAT IS THE REDUCTION,MANY OPERATIONS ARE THERE WHAT REDUCTION OCCUR IN EACH OPERATION

[@user-pt3mn5xw3m]

Where is the video continuation? How do you get the bottom in the form of a radius?

[@PSMITHjl]

At the end of the video he mentions "redraw". That is a separate kit, and you can purchase it at Rio Grande, but you need this basic kit to make the first draw.

[@amitluthra5877]

Thanks a lot.

[@RioGrande1944]

Absolutely! We are glad you liked it.

[@amitluthra5877]

@@RioGrande1944 Sir, which material should be used for making Deep Drawn Die.

[@othoapproto9603]

Yeah, but is it still 18 gauge?

[@Tarunhm07]

How to avoid wrinkles and puckering in deep drawing

[@RioGrande1944]

There are a couple things to consider to avoid wrinkles and puckering when deep drawing metal. First you have to make sure you're using the correct gauge of metal. Our keep draw kits are to be used with 18 gauge. You should also ensure that you're using a good lubricant. Our jewelry tech team prefers lanolin or lard.

[@adelelsharkawy9874]

Pravooooo

[@RioGrande1944]

Thank you!