How to use the different OUTPUTS on a mixing console | Understanding Mixer Outputs

[@storiesoftheamericansouth7346]

Thank you for your work! I bought a used yahama mg32 for $150 US. It was very dirty. Strippped it down to the chassis and cleaned it. Was very careful w the contact cleaner, but many pots are still scratchy and the channel 24 button won’t turn off. So I’ll need to clean again. Do you have any tips on cleaning the pots really well? Also the right channel never reaches the stereo mix, but it is there in PFL. Any thoughts on that? Keep up the great tutorials. You’re the reason I went ahead and gambled the 150 hoping this thing would work. So thanks!!!

[@LaloBajo6th]

Thanks a bunch man, your video is very helpful! I wish I could have referred to them years ago. But never to late to learn!

[@chiemelieijezie5284]

Hello bro…thanks for your videos. Please which mixers come with direct outs

[@gak0090]

Great concise, accurate and logical explanations. Thank-you!!!

[@kennethdesmond1804]

Thanks boss for this video, but please can I use the aux output for live streaming via a mobile phone, if yes, how ?

[@teashea1]

intelligent and articulate tutorial - very good production values also

[@MegosilSounds]

Thanks bro.. but is there away I can work a talk back mic system so the band can hear ourselves.. with or without the mixer

[@bendebenjamin2552]

Pls I still find it hard to do the connections as in grouping, pls can you be specific where exactly to input from the mixer to compressor and from the compressor back to the mixing console. And while grouping,the main output will still be use or it won't.

[@eniolaadeyemi7389]

My 16 channel MOSFET mixer console doesn't have "Aux" spelt out on it, but it has "EFX1", are they the same thing?

[@johnude7351]

I really do enjoy your videos and they are well explanatory. But i have few things i need clarity on how can you connect your subs on different output on the mixers to make them stand out in the mix

[@KelvinEriaganoma]

I'll probably do a separate video on that. Thanks for reaching out.

[@MrSollex1]

@@KelvinEriaganoma Please do, i also like to know how to connect my subs. If you show us the different ways for both passive and active, that would be great brother

[@BRUTALMEDIA-rm5rr]

What would be the ideal connection for recording a live show with a small zoom recorder? I have stuff coming up and I plan to upgrade to a zoom H6 Essential and I’ve always ran it through 1 cable going from the Aux send but sometimes run into problems not picking up all the instruments. And usually the main outs are being used. What’s your recommendation?

[@KelvinEriaganoma]

There are usually two or more types of connectors for your main output. You can use one pair for your speakers and the other for your recorder. Using an AUX involves creating a separate mix. However, you can use a post-fader auxiliary and set all its input faders to unity. This way, your main mix will be copied to the auxiliary bus.

[@emmanuelbenjamin4737]

Hello please how do I assign Bass guitar and kick out from range speakers to sub on the mixer

[@derekdiamond1977]

Great stuff, but how can I plug a none powered 4 channel mixer into a 6 channel powered mixer. There is no XLR on the 4 channel channel mixer. Great video, thanks for all the info.

[@calebmwesigwa7920]

I have a question, kinder off but need help. Wat are the uses of return ports on a snake cable. Thank you for the good work

[@sammiblackabel7165]

Wow I really lean three to four thing out of this That's awesome 😎😎

[@dovetouchproduction]

Thanks brother for the information. Can I use ST SUB OUT for my subwoofer while I use ST out for full range ?

[@tonyrobertsguitar]

Do 1/4” control room outputs require balanced cables?

[@paragon001]

❤️❤️. I want to Ask. How do I group maybe like 5vocal mics to a single channel control for further sound EQ. I tired it using group channel 1 but it didn't actually increase the volumes of the mic while moving the knob or the fader knob. Pls help.

[@KelvinEriaganoma]

I have detailed video on GROUPS here: kzbin.info/www/bejne/fICzqH-hr6-Egq8 You should check it out first. If you have additional questions, you can leave a comment, and I’ll be happy to respond. Thanks for reaching out.

[@favourshines]

good day sir....please can you do a video on the setup of an alesis divi5 drum module and how it works for me🙏?

[@emmyB10]

Can you pls explain how to connect the talk mic of this mixer....🙏🙏🙏

[@dowiewilliams6843]

Thanks for the video. I have a mg24/14fx mixer board at church, however within the last few weeks, I have been getting a distorted sound coming from the Aux sends. I used aux1 to send the signal to the online stream and aux2 for the on stage monitors. but when I am listening online it sounds very choppy. Speech is fine, but as soon as someone starts singing or and instrument starts playing the sound gets distorted. How can I fix that?

[@allinonechannel4555]

Can we give active speaker to group out in the mixer?

[@fireground8791]

👍 please I keep burning my outside horn speakers, I don't know why it keep happening, i don't know if you can help

[@kryptospace5228]

Hi Please how do I use in ear monitors with the mg24 for instrumentalists?

[@himanshumeena9531]

Hey brother I'm using UI24r soundcraft digital mixer. Please help me out, I need to know how we can split input channel signal and send it to aux only. I don't want to send any 1 channel output to the main L&R ? Just want to send it to aux only and other channels remain the same runs through main L R output. Please make a short video on that 👍🏽 or explain easily.

[@wilfreidngarbe3936]

thanks 👍, please could you release a video on how to use the Sub output

[@King_Lante]

How to do use the subgroups out put into an amp

[@menyindavis1031]

How do you increase aux output in a mixer board. If you have two aux out put but you need more than two.

[@Keysofghana]

Please the mono before the left and the right output what is it use for?

[@jewelkieran7265]

I have really learnt a lot from your videos. Thanks for all you do. Please can you do video on how to connect and use a cross over. dbx 234 to be precise. Thanks

[@KelvinEriaganoma]

I've added that to the list.

[@GreatCorban]

Yh thank you sir Kelvin But can you make a video on basic things yo note when mixing pive sound,like,how the drum should sound how loud the vocals should be etc just stuffs like that?

[@GreatCorban]

Sorry for the mistakes in the spellings

[@simonamponsah5982]

My mixer is not having aux but it is having the efx. Can I use the efx for stage monitors.

[@fatherliptin3637]

When are you going to help us in the connection of crossover to EQ and the settings please it's very important

[@iteaching7894]

If we want to use mic output from this mixer MG 24/14fx in an online meet/zoom meetings, what we have to do. Please guide

[@KelvinEriaganoma]

You can use a USB audio interface. Connect the mixer output to the input of the audio interface, and the interface to the computer via the USB cable.

[@idkeyzidkeyz800]

What about when you want to record in a live setting using just a laptop

[@derrickdabbley7308]

That was great bro. Could you please do a video on soundcraft fx16ii for me? Thanks

[@agegejustice4906]

Please I have an issue with the main XLR output making lots of noise. If you can help me with how to solve this, I'll be very very happy. If I can talk with you on phone so you can direct me, that would be awesome. Can we talk on phone?

[@ukeaguvictor9]

Please do this Mixer record audio directly with a laptop?

[@kobinawilliams6077]

Nice video but I have a question. Where exactly does the Direct Output output to? Cause if Main could go to Front of House and Matrix could do same, where does Direct ouput go if it outputs only from one signal source. Let's say you're doing a live show, does it mean each Direct Out will go to it's own speakers? I'm confused

[@KelvinEriaganoma]

Direct outputs are not meant to be connected to speakers. When mixing live, you can create a recording of your inputs on separate tracks in a DAW, using the direct inputs connected to a multiple-input audio interface.

[@kobinawilliams6077]

@@KelvinEriaganoma Oh okay, thank you. Please do you have a video explaining what Insert inputs and Insert outputs are? Wish I could connect to you privately

[@KelvinEriaganoma]

@@kobinawilliams6077 You can send me a DM. Check the "about" session of my channel for my social media links.

[@johnude7351]

@@KelvinEriaganoma i have a question when using two Analoge mixers Due to limited channel on the main mixer and your main mixer is where your monitors are sent through the aux sends how can one hear the individual channels through the aux of the submixer

[@maxmubonda2338]

Can u show how to separate soubd for the bass bin and higher speaker

[@alfredcowie3482]

Can I use 0x1 to huck up to my sub speaker please let me know

[@somavibze3313]

Sir ho can we compress with analog mixer

[@bigjoe_official22]

Great explanations but i wish you to support it with phyiscal demonstrations for better understanding

[@MidnightMistRecords_80]

Can you mix midi instruments in the daw, using line inputs of a console?

[@chiemelieijezie5284]

Secondly, can these direct outs be used to send the individual channels to another mixer

[@KelvinEriaganoma]

Yes, they can.

[@richmandavid49]

What’s the name of the university you mentioned?

[@austinchiagozie6621]

Please sir what's the name of your console?

[@ifesimlevi6889]

Please teach us how to set a graphic eq on a mixer 🙏

[@capacitacionatcenlinea2.104]

Oh man, you blew my mind!

[@raul_lozanomusic]

This was an awesome video!

[@veeramani8]

Brother how video recordings and connection please

[@edzeljancosip6446]

Where to drive the low frequency? output

[@musamusmanfubesi826]

I have a question to ask

[@edongstv]

What are the use of sub out on mixer

[@KelvinEriaganoma]

Sub-out is an exact copy of the main mix. It's use is versatile. Whatever the main mix is used for, the sub-out can also be used for it.

[@shobowaleoluwaseyi6978]

Nice job Kelvin, how can someone get your contact

[@chuksfavour5772]

Omooooò. U said lot of things but I feel u need more illustrations for better understanding. Thanks

[@barakudaofficial5337]

I need mentor

[@gilbertmensah3086]

Good evening Boss I like your tutorial but with the demonstration aspect of your lesson. Please I would like you to show or point out exactly what you saying or teaching, thank you.

[@KelvinEriaganoma]

Will do. Thanks.

[@gochurra5702]

Thaank you bro !!!

[@sammiblackabel7165]

I have a question to ask oooo

[@justinabaraofficial9553]

Insightful

[@larrytan73]

wtf! what happened to the control room out!

[@attangalpha8956]

i didnt understand jack you said matrix

[@luckisoundcraft645]

❤❤❤❤

[@ChristopherBroderick-pc6bg]

Are you taking life classes

[@vinusk1319]

Good👍

[@bendebenjamin2552]

Less I forget you're good,but be a slower and be detailed in showing how to input the cables and be in a practical mode if possible

[@mirekujnr5112]

Please take your time your run faster

[@ReyAvenueOfficial]

Hahah😂

[@Grandpaidiot]

You too rush. The video is not useful

[@lightsobriety6092]

Pls I sent you a message on IG .. I need ur contact plssss