How To Use The Flower Stitch Foot

[@a101133]

this is the best demo of the flower foot. the info sheet that came w it was not as easy to understand as your demo. your demo will go on my facebook pg. its a keeper.

[@knitknack2285]

Thank you! I bought this foot, not knowing how to use it lol

[@bpaulsen6701]

This is so great! The other tutorials don't explain how to use different stitches with the foot. So many more possibilities! Thanks!

[@Carylanne927]

OMG I've had this foot in my sewing room drawer for 8.5 years, never knew or cared how to use it, when I bought the machine it came with it. Of course I just haven't looked for any instruction, however, I believe I will go play with it tomorrow and see about the darling stuff I can come up with. I'm using my granddaughter's machine while mine is being serviced and I'll have something to show her when she comes back next weekend. TY for making everything so clear.

[@annlinden1596]

Oh my goodness! I have had this foot for years and could never figure out how it works. Your video was so helpful! Tomorrow I am trying it again! I cannot thank you enough! PS. Did you know that on today’s date in 1842 John Greenough applied for the first US patent for a sewing machine? Fun fact for your company!

[@cindymaki7540]

Wow. Thank you so much. I have this foot but couldn't quite figure out everything it would do. Another video online said to make sure the bobbin is in before installing the foot. I did learn this the hard way.LOL.

[@libyacartwright6735]

Me encantó como explicaste, se entiende bien.....mil bendiciones, saludos desde Panamá 🇵🇦

[@queentroll1955]

Do not take this wrong. But I love you. lol. your video was so well made. I had watched a couple and still was fighting with it. Now i cannot wait to play.

[@sheilajones4491]

Hi have you tried using a fusible interfacing?, also using a tear off or water soluble backing as well really helps. I struggled a lot at first but this worked. I have plate to cover feed dogs but it kept popping off so tried covering feed dogs with polyvinyl electrician tape ensuring i leave a space around the needle hole. This works every time. The tape does not leave sticky residue and when i take it off i leave it on the side of my machine to use again. !!!! do not use sticky tape!!!! Tips Thread needle with presser foot up ensures it goes through tension disks Check using correct bobbin for your machine ensure it us wound correctly Set lower tension 3-4 is good for me but you may need to adjust depending on stitch chosen and material Ensure your sewing piece can move freely and does not get stuck in throat area of machine. Practice in smaller pieces of fabric I use 90 (14) universal needle but for thicker embroidery threads and glittery threads embroidery needles might be useful as have larger eye If am just using stabiliser i find i can use 80 (11) universal needle Hope this helps someone 😊

[@SewingPartsOnline]

These tips are wonderful!! Thanks for sharing!

[@SewingPartsOnline]

Hi Deborah! I have a Brother LB6800 - we have them on our site. Such a great machine! Thankfully, most new sewing machines have a thread cutter - such a great little feature!

[@shirleybrown9643]

So glad i found your videos. I purchased the flower stitch foot quite a while back but have not had time to learn how to use it. Your tutorial certainly cleared up a lot of questions for me.

[@vidhya6327]

Nice tutorial. I tried many tutorials and I would say sewing parts is the best. I was succesful in 1st try after seeing this tutorial. Thank you.

[@JubileeJudy]

This is one of the best tutorials I've ever seen -- thank you for doing both the back and front view. I'm ready to start! Judy, Sterling Heights

[@faithhahn4743]

Just got my foot today and couldn't wait! Worked great right out of the box. This tutorial made it so easy to understand, too. Wish my machine had more fancy stitches to play with using this foot, but ohhh the ideas that have popped into my head already! The only thing I can suggest to others who buy this foot, if you are going to sew onto one piece of fabric, use a stabilizer of some sort with it.

[@carlynholmes]

Good good good instructional informative tutorial... thank you!

[@jeanbudd]

Thanks another great video I have had this foot for a great many years and never used it . I will now though.

[@williamsews]

I tried it and the results were fun, but it only worked on an old machine with foot pressure adjustment, I now have a new machine with this, I should try again - and watch this video to see where I went wrong.

[@falconridgedesigns]

excellent video. thanks for taking the time to show this.

[@mahihour]

Just got it today by amazon I'll make some flowers in my 2year old doll's(my baby) frock.. 😊😊😊😊😊😊

[@SewingPartsOnline]

Hi! Yes, as long as you have the plate cover, you are good to sew. And thank you for your kind words!

[@SewingPartsOnline]

You can reach us anytime on our Facebook or by emailing info (@) sewingpartsonline (dot) com

[@appsdaily4845]

Explanation is good. Thanks for guidance

[@kellyhipkins5616]

Thank you for sharing

[@anitagreen2263]

thank you.

[@carlynholmes]

Another very good tutorial...thank you!

[@rebapepper4635]

Thanks, very well explained ! I have it at home, time to practice ! :-)

[@audreybuchinger1]

the video helps soooo much-thanks

[@Welcome_cutie309]

That was one awesome video.

[@carlynholmes]

Thanks for the demo/tutorial!!

[@yolo22]

so cute! thanks for the demo

[@SewingPartsOnline]

Thank you! I hope you enjoy it!!

[@mannarmohamed9414]

Plz say how to take this foot i want this.......😥

[@SewingPartsOnline]

Awesome! Hope you have a great time with it!

[@mannarmohamed9414]

I take this foot but how to take this foot plz say

[@SewingPartsOnline]

Isn't it funny what we find years later?! I hope you enjoy uses this foot - it's quite a bit of fun! If you have any questions, feel free to leave us another comment!

[@Sunnylass7]

I'm way behind the eight ball as I have only just discovered this foot! Really good video, and now I'm excited to have a play with mine!!!!!!!

[@Sweetfluffythings]

Hi, I love this turorial, very clear instructions. I would love to purchase one of these for my Singer which comes with a plate that I cover my feed dogs with which means I can't actually "lower the feed dogs". Please can you tell me if I can still use one of these feet for my machine.. Thank you for posting such an informative tutorial and thanks for answering my question in advance.. A stich of love to ya! x

[@3dgirish]

very very nice This so cool.....

[@SewingPartsOnline]

Thanks for watching!

[@swdesai21]

Thanks so much for your excellent video!!

[@SewingPartsOnline]

Yup, it is compatible!

[@trishjang3234]

Thanks so much, the answer helped,

[@lindabridges445]

Thank you for this demo. I purchased this from you because your are the first to complete it can be used on my Brother QC1000. I have placed an order and am now waiting to receive so I can try this our. Also your pricing was much better than anyone else. Since you use Brother. Do you have videos for the Brother 2340CV?

[@cwettable1]

That was awesome!!!!! I never heard of this foot but watching you makes it look so easy I just might get me one THANK YOU

[@rhondaroberts9581]

Does the needle position have to be in the left?

[@semzm3mz547]

i like watching your videos. you give me belief that i can do it too.

[@audreybuchinger1]

love this video. I could not figure out threading or winding yhe bobbin on my Singer Quantum 9960 machine. as soon as I get off of here I will try it. wish m e luck. does my machine come with a flower attachment? I did not see any. If not, can I buy one somewhere?

[@onyubo]

So many feet, so little time! Who knew that there are so many options!! Please, will this work on a Necchi EX30? Thanks for sharing!

[@normasilver5639]

I loved this thank you x

[@nageswaryvanham725]

Wow, that was fast reply, thank you so much.

[@SewingPartsOnline]

My pleasure!

[@SewingPartsOnline]

Wow - thank you so much! I'm glad it was helpful!

[@SewingPartsOnline]

Yup, it will work with your machine!

[@SewingPartsOnline]

Hi Maximumblue! It will work with both of your machines!

[@rodiatulmardiana3063]

Good learning

[@Rosieposie-100]

Hi, I just bought one do you need to move the material while stitching

[@SewingPartsOnline]

Yes, J 15 bobbins work on the bobbin sidewinder!

[@belindaflanery4056]

I've just recently got a flower foot for my sewing machine,I can do small an medium designs,but when I try the large it messes up it won't go in a circle am I suppose to move the something to make it go in a circle correctly on large motions? Ty ur video has been a big help!!

[@Karmaz132]

I can’t even get this foot to move in a circular motion! I’ve had this for so many years I keep checking for new videos to see what I’m doing wrong but it still won’t move! I’m exhausted!

[@ryoung151ry]

Thanks for the demo on this foot. What is the tool you using to tighten/loosen the screw that tightens the foot. Did it come with your machine. How large of a circle will it make.

[@MIROIRGOOX]

ryoung151ry y

[@SewingPartsOnline]

Hi Sheryl! Do you have the foot? It should have come with a manual that includes pictures of what the flowers look like using different stitches.

[@AvoksimTami]

You have a perfect nails.

[@jojozepofthejungle2655]

I seen you say to "bring the bobin thread up" that would be why mine is not working??? Cheers for that info

[@xladymaniacxyt3748]

Hi there I have a old seamstress machine that weighs a ton lol, it has an embroidery setting which lowers the feed dogs, so thats a step in the right direction lol. The only thing is my machine only does a normal stitch ( in different sizes ) so I am presuming that this foot will be no good on my machine because I will just end up with circles and not flowers :( ...... Awesome video btw :)

[@merlefernandes5863]

Pulling up the bobbin thread before starting to machine the flower is very important. Or thread won't catch on the upside

[@Gunzoshi]

Can this be used on Singer 9116? Your tutorial makes me want to try this out sooooo badly.. :)

[@deborahring7564]

Great videos!! What kind of brother machine do you use...I notice that it comes with a auto thread cutter!! Thanks!! :-)

[@montrealmom3]

thank you, the bobbin sidewinder does it work with J 15 bobbins

[@VLinas]

I have an old Kenmore with stationary needle. Will this work for me ? I have a short shank model.

[@mariamarfil1620]

👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼❤️

[@Pradatoo2]

An you uses this on the Brothers sewing machine RX 3340. Thanks

[@sherylthomas9156]

Came with machine in little box inst on attaching to machine but no suggestion on which stitch produced what flower

[@mahmoodinsari6961]

hi.i want to buy a matchine .which hav all the fncshnz nd all kinds of tools inthat plus easy to use.kindly......what u will sugest for me?m actuly vry cnfuse coz i want to use that on comrshl way..........

[@sonyasew2]

Thanks🧚🏿‍♀️

[@sherylthomas9156]

Do u have a print out of the stitches and what flowers they make? Or a few of them anyway

[@joannefink3595]

Hi Sarah! Thank you for the video. Will this work with Singer FeatherWeight?

[@alexadams2954]

Hi I am living in Bridgeport ct, I would like to get a pressure foot for a server singer over lock,it is general or regular foot that came with mine is damage

[@lakshmivp753]

Can you use decorative stotch

[@ivettecardalda9257]

Thanks.

[@brendahare1803]

Does this work on the Bernina 440 QE or Pfaff Creative Sensation? I have both. No Brother machine for me.

[@SewingPartsOnline]

Hi! You can find it on our site by typing #FSF in the search box.

[@radhavishwanath4213]

Ma'm, Is this Flower Stitch Foot suitable for my- Usha-Janome ( wonder Stitch)? If so,,, I will surely like to purchase the FSF. Kindly Reply. & thanks for ur tutorial.

[@SewingPartsOnline]

I am sorry, but I am not pulling up anything on your machine. Is there a model number noted on the machine?

[@montrealmom3]

will this foot work with my singer futura XL400 embroidery and sewing machine

[@brenholmes4894]

Will this foot fit the Bernina 580, with the low shank adapter,#77, please?

[@wakeupherewego7245]

Hi! I had seen many of your tutorials, very well done, good explanations and clear. You are a good teacher. I have a low shank computerized machine which works marvelous with lots of feet. The only 1 I can't figure out what is wrong, why doesn't do any flower, and I tried all about thread tensions, I use different types of fabric, always with the proper film behind the fabric and zero...my machine doesn't do anything. The up thread line simply doesn't stay on fabric most of the times...but does all the other complicated padrons without any change on the machine. I only put again the feed dogs. When I lower them to use this foot, the stitches come up and don't stay. I locked the 1 ones. I even bought a second foot to see if the problem persist and yes. I am so frustrated. Everyone is doing nice flowers...

[@merlefernandes5863]

My machine has a similar problem. It's not picking the thread n making a stitch but going all around without picking threads. Hv you figured out the problem. Would be really happy if you can let me know too

[@wakeupherewego7245]

@@merlefernandes5863 Hi! I think your machine and mine do the same problem. The upper thread simple don't stay on. Sometimes one or another stays, but the majority don't. Than there is a big amount of thread in a " head" under the fabric. Doesn' t do any flower. Would be very nice if the lady who posted this video, could say what she knows about, or if she doesn't know. Any other person who can help? Or have a similar problem and sorted it out? Can you please say what is the solution?

[@incanada83]

@@wakeupherewego7245 Further down in comments, someone had similar issue and I quote the answer below: "Sewing Parts Online 3 years ago Hi! If the thread isn't catching, I recommend changing your needle - ideally to a topstitching needle." Also, found this question and answer below in quotes: if you need that as well :-) " when shifting the foot over minus or the plus sign....should the needle be up when moving it? The needle should be up while you are moving it. If you're doing a circle inside a circle, only the foot should move. The Flower Stitch Foot kind of acts as your new feed dogs".

[@wakeupherewego7245]

@@incanada83 Oh thank you for all information. I will write them and try all. I can say that I think , I am not sure, that i had tried with a brand new needle for thin fabric, as it was that kind of fabric, but with the one proper for embroidery behind. About moving the width of the circle, I do put the needle up, which for what you post is wrong. But 1 things 1. You mean should be a brand new needle, and for the fabric I am using right?

[@incanada83]

@@wakeupherewego7245 You're welcome :-) Well, according to what the Sewing Parts Online suggested, you may have to try that specific sewing needle. But aside from that, I have a suggestion : have a look at this tutorial (watch from the beginning to end) because it explains better the whole process. I think it is about fabric choices and stabilizer. Either way, it's interesting, not long , and it may help you? I know I learned few things from it !? kzbin.info/www/bejne/hYm8f62amcmla80

[@montrealmom3]

will this work on my singer 6251 model

[@jo-annemclagan2597]

Can you tell me if this work on all machines please?

[@SewingPartsOnline]

Hi Melissa! Unfortunately, Huskystar is pretty picky about what feet it will use. It's not compatible with the Flower Stitch Foot. Sorry ;(

[@jacalynjoana468]

what kind of stabiliser should I use if I want to stitch on garments, quilts and other projects?

[@SewingPartsOnline]

It all depends on what fabric you're using and what kind of stitching you're doing. To sew decorative stitches on woven, medium weight cotton, a light-weight cutaway for fusible stabilizer should work nicely.

[@cheririnkevich5477]

Is this for a regular sewing machine or for an embroidery machine? Thanks, Cheri

[@SewingPartsOnline]

+Cheri Rinkevich It's a sewing/embroidery machine, the Brother LB6800PRW

[@hayfa9996]

can I use it for my brother embroidery 1000e embroidery machine

[@danatucker6390]

I don't know what I am doing wrong but I put the foot on and my feed dogs are down, I start to sew and its going ok and then my needle hits that little metal bar that sticks out in the center of the foot thats on the bar where you can change the size of the stitch, I hit it all the time and it breaks my needle! I am up to 8 needles broken now.... I am so flustered as to what I am doing wrong.... any helpful tips would be so appreciated! Thanks! Also what stitch width and length do I do? thank you

[@catherinelane9631]

Hello from Australia! How are you? Iam a beginners on this. I have a Brother JS1400 sewing machine. But not sure what foot i can used to my sewing machine. Can you please tell me? Thank you very much And also this demo you did, how did you bring the thread up from underneath without sewing the fabric? Appreciated for your reply. Thank you very much

[@SewingPartsOnline]

Hello! I am not showing that this flower stitch foot is guaranteed for your machine; however, after doing some research, it appears you have a low shank machine. It would be a great option to try. As for pulling up the thread, after your machine is properly threaded, you manually rotate your handwheel towards you while holding the top thread and you can carefully pull up the thread. If you would like a visual, please watch our Beginner's Guide to Sewing (Episode 1). This is explained at 9:38. www.sewingpartsonline.com/blog/beginners-guide-sewing-ins-outs-sewing-machine/ I hope this helps!

[@paddyrelangi7852]

Nice

[@Moffeliten]

Does this one fitt Brother NV series

[@athenasgrovetrims9999]

What?!?!? Eyelets in a minute?!?!?! I have not been living right!!!

[@ellenhofer3343]

Most modern sewing machines have a built in stitch for eyelets.

[@annemariegriffin765]

I've a brother innov is 20. When I attach the flower stitch foot the machine show up error and to use G foot for example and won't allow me to sew? Is there a way to overcome this as the machine in the clip looks similiar to mine from the back.

[@SewingPartsOnline]

Hi! Yes, this foot will work with your machine!

[@PeterDH21]

Can this foot be used with my Janome 8900QCP?

[@lillyminxy2002]

I have a Singer Futura 900; a Singer 192 Spartan and a Singer 66 would I be able to use this foot on any of these machines?

[@SewingPartsOnline]

Hi! Unfortunately, Viking does not have this foot yet.

[@drownedinnostalgia3433]

Hi does this work on Brother JX2517?

[@masreyawi]

please I have a question what's the max size of twin needle we can use I have 1.6 wich can be low, and size 2 and 6. thanks

[@SewingPartsOnline]

Hi! I wouldn't go any larger than 3mm.

[@phoebeBme]

This accessory foot works with a low shank machine only. It will work with some Janome machines like the 6500.