How to use the iDataLink Maestro interface on your Kenwood radio

[@paulgrimm7842]

This is a great product with great tech support . The gauges are great. I’ve got things like exhaust, intake manifold , transmission temp.

[@RicheySynthetics]

Could you do a video of step by step wiring of a newer Kenwood (DNX 995S) wire harness along with iDataLink and accessories including GPS, SATELLITE RADIO, BLUETOOTH, AM/FM ANTENNA, USB/AUX and including excluding using factory speaker wires. In another words, if your going to run all new speaker wires from amps and do not need the factory wires. Particularly for a 2015 Tundra NON-JBL eliminating the factory amp as well.

[@broberts5occ]

Great vid guys! Plus you added the kids yelling hooray in the intro again lol gotta love that.

[@DiyAllaroundguy]

Extremely helpful video . I was wanting this head unit but was wondering if it would even worth the features . Thx guyz

[@jmaslin]

Another fine video for my morning coffee, thanks guy. This helped me too, I have a F250 w/ Sync and factory USB so I'll need some of that equipment.

[@joeymerrell8585]

How did this work out for your f250? I have the same truck w sync and got the rr2 and can’t get my steering wheel controls to work.

[@justinaskew5107]

When programming this for my 2018 tundra. I have a factory amp however its the NON JBL system. Ive removed that and am using an aftermarket amp. When programming it gives me the option for amplified non jbl which I selected. Apparently before I hit flash theres an option to uncheck factory amp however I cant seem to find that. Any help?

[@newlifeministriesofapex6181]

I replaced the stock head unit in my 2006 Range Rover HSE with a Kenwood DMX9706S and want to retain the OEM camera. Is this possible being that the video cable is what appears to be a mini bnc proprietary cable?

[@lost0187]

Can the operation of rear a/c be used on screen when paired with a i data link system for say a Ford Flex or Lincoln MKT?

[@billgantz7861]

Is there anyway to flash or program the Maestro. As it is working and such so far. But, I'd like to update it while not having to pull it out. And start all over via laptop....

[@jessicareviea4513]

i'm wondering the same thing. thinking about adding a USB port on the side of my console to do just that...as long as it will work. because getting it out is no fun.

[@rjose610]

My ac controls use to look like this in the video..today I started it up & now it looks different & doesn't work ..it has a plus & minus symbol...any fix ?

[@patrickgowdy7656]

Mines don’t come on at all

[@Smokyburnowt]

Firstly, you guys are awesome. Thank you for putting such accurate content! Do you have a newer version of this video? I have a 2020 Tundra Limited CrewMax and I’m replacing the factory JBL system with a Kenwood DNR1007XR, Idatalink RR2, Focal Flax 3way in the front and Focal Flax 2way in the rear. Doors will be powered by a JL Audio VXI 400/4. A pair of 12” Image Dynamic 2ohm subs are going to be in a TacoTunes Full Fiberglass box behind the rear seat, powered by a JL Audio VXI 1000/1 @2ohms. Considering adding an additional VXI 400/4 later in order to run fronts and rears separately at higher wattage. I’m using a VXI Hub to link the amps in a network and also a DRC205 Remote Knob for separating my sub volume from my main volume when needed I’m almost done installing everything, but I’m a bit confused on where to start when it comes to system setup and tuning. Also, I want to add front and side cameras later on for a 360 camera setup for parking assistance, but I don’t know what cameras to buy. Would you guys be able to post a video to help me get these topics pointing me in the right direction? Oh, and one thing you recently commented was that Pandora isn’t all that great. What’s a better alternative? I’m a hobbyist, not a professional. I haven’t installed a sound system in a really long time, but I like nice stuff and I like a clean install just like you guys do. Thank you!

[@paulgrimm7842]

I recommend the Kenwood DN 994s. Sounds great with navigation

[@Rayzaa101]

Nice video explanation but my 2007 ram stock radio does nothing lol. Just has cruise control on steering wheel that I never use and has a Aux plug to play music from my phone. No tire air pressure sensor. Not sure I need this at all with the Kenwood unit I want to get(DMX47S). Will take apps work and Android Auto without it? Don't think I want to spend an extra $159 to maybe tell me how warm my oil is. Crutchfield guy said I needed it but from researching Im thinking I dont.

[@8999Longfinger]

I have this exact set up. Does the Parking brake use maestro to detect its engaged? And if so how can I bypass it? That is guys and great videos!

[@dbsimms63]

If you install an idatalink head unit in your car will it allow you to add tire pressure monitoring? I got a Pioneer DMH-2660NEX for my 04 cobra and wanted to put TPM units in my new wheels so I could monitor my tire pressure. Can I do that through the unit? Also would it allow me to monitor the engine through a OBD-2 plug in?

[@thoroughbread1975]

I want to purchase an maestro rr2 for my 06 ford f250. I have a Kenwood DDx793. I went to Best Buy and they couldn't pull up the ddx793 to flash the maestro to the stereo. I take it from the video that you don't necessarily have to flash for the stereo so much as you do the vehicle. Am I right by saying that? The stereo is idatalink capable so it should recognize it once its plugged into the head unit correct? The installer for Best Buy said that he wouldn't be able to flash the maestro,

[@kenbrooks5986]

I have a question. I have the Escort MAX 3 and its connected to my maestro RR2 on my Kenwood. If I get the M1 camera and connect it to the radar detector, with the Radar detector still work on the Kenwood? I ask because the connector would then be plugged into the camera instead of the detector

[@beri232]

What if I have an older Ford F350 (2005).... am I still able to view gauge information on the head unit? I currently have an Edge monitor that plugs into the OB2 to view gauges that are not available on my dash but the trucks ECM has full access to. I could get rid of my Edge monitor if this deck works in this way.

[@d4rkz3nn3n]

So is the rr only needed to retain the steering wheel controls? I've got a 2011 Ford mustang gt that's not a premium so it doesn't have the steering wheel controls but I wanna replace the radio

[@markcasillas2166]

Great videos dean I just bought the DMX706S, hey dean quick question,how come Fernando looks like he hates being there when you talk about products or unboxing? He looks so impatient and mad all the time lol keep up the good work

[@14truelies]

Okay quick question. Is this part 100% required for AC to work on a 2014 mustang gt? I swapped my stock set up for the mastero kit but didn’t have the rr yet and my AC won’t work if I hit the climate button

[@fernandocasillasjr]

"...and for some STRANGE reason you want to retain the Ford sync system..." 😂😂 I know what you mean.

[@FiveStarCarStereoInc]

Fernando Casillas Jr 😂right!

[@spacecowboy1924]

Five Star Car Stereo hey five star I have an interesting problem that you might be able to help me with. I work at a car stereo shop and I install lots of radios. I have the k150 kit and a ddx794 in my 2013 f150. Everything works perfectly fine except for when I sometimes change the song with my steering wheel controls, the radio screen freezes completely and I can't adjust volume, change song, of even shut the radio off. I have heard of issues with the maestro and older Kenwood nav units causing them to freeze. I have replaced the radio and reflashed and master reset the maestro. It only seems to freeze when I use the steering wheel controls and it is intermittent and random. I do this for a living and am at a loss with my own vehicle. I would very much appreciate a response. Thank you

[@TechMechRandom]

@@spacecowboy1924 2 years later and no response. Hope you found your answer...

[@chrishood5891]

I have a 2013 toyota tundra crewmax. I'm having a kenwood DNX575S head unit installed. What exactly will I have or what features as far as vehicle info will show? I'm confused as to what exactly to purchase for the idatalink maestro. Thanks!

[@pauldillingham2237]

I was at a training not too long ago for some idatalink products and they are coming out with some pretty stuff

[@FiveStarCarStereoInc]

Paul Dillingham yeah, they have some more nice dash kits coming and the mysterious factory amp interfaces.

[@pauldillingham2237]

they are good about keeping things hush hush till it comes out

[@FiveStarCarStereoInc]

Paul Dillingham yeah why get feed back on things we might need and want. Better idea keep it quiet

[@pauldillingham2237]

true true. keep up the amazing works guys. I lead a couple guys at a honda dealership with remote starts. and do car audio on the side

[@FiveStarCarStereoInc]

Paul Dillingham cool thank you. Has the say "Winter is coming"

[@73ariangtr]

Dean/Fernando, Atoto A6Y2721PRB-G head unit and iDatalink's Maestro ADS-MRR...am I able to get at least backup camera and steering wheel controls to work?

[@HeartOfTheHorses]

This looks awesome. Will it fit in a 2015 F-350 super duty? Thank You for any information 🤠. Guy

[@dennis7814609]

I have the DNX995S in my 15 F350 replacing MFT Sync2, put it in in 2019. Huge improvement.

[@the-bu3lb]

Do you know if they have this for Jeep Wrangler so I can see my doors open adjust the 4x4 Information?

[@jpenner5540]

If I install this on a 2017 Ford F-350 xlt with a Kenwood dnx694s radio. Will I see ambient temperature? My stock radio had ambient temperature in it and when the Kenwood got installed I no longer have temperature. Thanks Jordan

[@darrellbyrd69]

I have the 8706s kenwood i have 2 batteries in my truck will it show both batteries on the gauges

[@joecader]

How do I know / make sure I'm not getting ripped off? There's so many 'connectors' used.. Best Buy has like 7 things for my 2016 CX-5 with Bose and one is out of stock. Could you guys help me? I got the Kenwood DMX7709S

[@briangutierrez5635]

What I need one for my 2008 Toyota 4Runner SR5 it did not come with the JBL stock play just a plain radio the CD player what I need the Maestro RR for the new radio Kenwood 770 6s

[@noelus11]

Hi I'm interested to install the Kenwood 995S and Maestro RR in my new car. Vut I'm from the Philippines and my unit is a Toyota Innova 2018, a model not found in the US. Will these units (Kenwood amd Maestro) work in my Toyota with the features I desire like getting the gauges on screen, AndroidAuto, Car Play etc?

[@scottsmith6693]

I have a 2015 f250 with ford sync 2. I am wanting to put a kenwood excelon dnx893s in but I was told it wouldn't retain my factory a/c. Is this true and if so, how do I fix it?

[@YouTrolol]

i have a 2013 honda insight. when i go to the maestro page, select my car, i end up with an installation guide, but no harness. is this compatible with my car? does it just not need a harness?

[@s.sfishing4978]

Acoording to the website it won’t go back to 2001 for a Toyota Landcruiser. Am I at a dead end with trying to purchase one of these?

[@FernandoSanchezLandeo]

mazda cx5 2016 sport trim, for a kenwood dnx875s what else you recommend? Can I be able to keep the feature like lock doors, etc?

[@droneenelcielo3388]

hello I bought the radio dnx996xr, if I buy the ADS MRR master, does it work on a nissan patrol y61 2007 diesel?

[@150dbtrunk]

You guys are great

[@kevinandre7064]

What about a 2016 Hyundai Veloster Turbo? What features are available??

[@aztecgoji]

Do I need an RR module for my aftermarket radio to work? I have a 06 chrysler 300

[@TheEnemigo360]

Do you guys have a dash kit for 2015 Chevy Malibu 3lt turbo with automatic climate system?

[@eezyrider65]

You guys are good! What can you tell me about disabling the parking brake sensor (Parking Switch?) to enable video all the time on a Kenwood DDX8706s with a Maestro RR installed?

[@jakes197]

you've probably found the video already but if not . you take the wire labeled " park" put a terminal ring on it then screw it down to one of the screws on the stereo and it's bypassed

[@patrickgowdy7656]

I don’t have those ac settings

[@OctaneStreet]

There are so many aftermarket headunit setups out there... It's impossible to confidently choose one . . .

[@McRemmyBaby]

Dmx1057xr

[@Sos4R4y]

Hi. Love your videos. I've spent hours researching car stereos mostly your reviews. I was wondering....I have a 2012 Honda civic. I'm debating on whether or not I should get the maestro idatalink rr. Will this do everything on my car (battery power, exact tire pressure, temperature inside, power, gauges etc). Thank you for your time!

[@jasontran108]

I have a similar question. Will the RR give you this information if the original Vehicle stereo did not provide these details? In other words, does the RR add features vs just retaining original factory features?

[@TechMechRandom]

I have been watching your videos for a month or so no and decided to pull the trigger on upgrading my 2017 Toyota Sequoia OEM head unit to a Kenwood DNX576S. After doing so I no longer have OEM backup camera or the microphone working for calls. Also, this unit has XM but when I click on it it just says Check Tuner. If anyone has any experience with these issues, please help. Thank you in advance!

[@McRemmyBaby]

Dmx1057xr Don’t be salty lol Installing end this month

[@pakmanmoore7159]

Can I use this for 2002 Buick century limit 🤔

[@jamespotts4846]

Can I get the gauges feature on my kenwood dnx691HD in my 99 GMC Sierra!?!?

[@chevyboi1989ms]

What about performance pages for dodge challenger/chargers?

[@bwilso9490]

Great Video. What would you recommend programming the steering wheel controls on a 2018 Tundra w/JVC.

[@mustanggt9423]

Hello! Quick question i have a 16 f150 4in screen i got the Pac dash kit and the kenwood on this video, when i add the idata link do i not use the PAC wire harness amd use the one for the data link instead??? Thank you for your videos!

[@FiveStarCarStereoInc]

Yes you would use the iDatalink wiring and not the PAC.

[@usman9399]

Hy , great video, I’m from uk just checking if there would this work for my car Honda Accord ctdi ( diesel) 2007 with sat nav . I have see similar ones but it’s for petrol only .

[@jessicareviea4513]

honda makes a diesel accord!? dang we get screwed.

[@joeh690]

Okay so pretty much what this does is link your other accessories like your heat AC and so on onto your screen. I was wondering how you got this working. Way too complicated and expensive for me at the moment. 🤯🤪

[@lonnieking4911]

Hi there, u have a kenwood head unit in my 2016 f150. On the gauges screen everything seems to be accurate, but the mpg is way off.. says I average 7 mpg and instant around the same, I know without a doubt I get atleast 17. Do you know a quick fix for this please?

[@ImanAhole]

i know this is an old question but how you describe this it sounds like you need to change he size of the gas tank in the Maestro Setup page they showed near the end of this video. sounds like default size is smaller than the tank you have in your F150

[@mrmagic34]

Five Star Car Stereo I have a 2011 mustang with sync with kenwood headunit can I use the factory usb port and do I need to use microphone that cam with headunit ?

[@FiveStarCarStereoInc]

spencer wright yes on the sub. I you want to use the sync system you can use the factory mic. If you want to use the Kenwood Bluetooth, CarPlay, or Android auto you have to install the Kenwood mic.

[@joaco6]

hi! can it be connected on an alfa romeo 159 2010? thank you

[@loloent]

I wonder if this can be implemented onto a 03 suburban that has this info on the dash cluster?

[@FiveStarCarStereoInc]

lolo ent no they do not have Applications back that far

[@chrismcdonald7302]

awseome video. I do have a question I have the maestro rr and a Kenwood 893s hooked up in a 2016 f250 diesel the only issue I'm having is when using bluetooth through factory sync there is now static very annoying any help would be appreciated. I had no such static prior to installation. Oh and static is only present when. vehicle is running thanks!

[@FiveStarCarStereoInc]

+Chris Mcdonald we have never retain the Sync system when we do one. I would definitely give iDatalink a call though 1866-427-2999

[@chrismcdonald7302]

Five Star Car Stereo that Ms that's exactly what I did so if anyone has that issue it's with idatalink they talked me through it it 5 mins. great thanks keep up the videos!!

[@FiveStarCarStereoInc]

+Chris Mcdonald glad they helped you out, thanks for sharing

[@Nahyoutrippin]

Looking to upgrade to double din in my 2011 Mercedes c300. Is there a Maestro kit for that?

[@FiveStarCarStereoInc]

whereitallhappens no Maestro for Mercedes yet

[@myk3ch1chas196]

Para el Chevrolet S10 98 logra leer los datos?

[@RobertoRodriguez-ce3iu]

i have a hyundai sonata 2015 and have the radio 893s , ok and i want to know if you know what i need to do or what module i need to use because when i look in the idatalink webpage do not have nothing specific for my car ???

[@RobertoRodriguez-ce3iu]

??

[@FiveStarCarStereoInc]

Roberto Rodriguez unfortunately that is because they don't make anything for your car yet. Your car does not need a smart harness to work so they don't make anything. Yes it would be cool if that made a basic add on so you could get gauges tire pressure sensors and stuff like that. Maybe one day

[@RobertoRodriguez-ce3iu]

ok thanks

[@sgshere]

Hi, I got 9903 with Maestro RR installed but the guy couldn't make the phone button on Vw 2014 SE Jetta work. The phone icon button would just either decline call or long press redial last number. Any suggestions?

[@FiveStarCarStereoInc]

Sumit G you can setup what you want the buttons to do when flashing the RR. Did he try to select other options before flash?

[@sgshere]

Five Star Car Stereo He said that he actually installed a new idatalink RR just for the sake of it and tried it but it's still the same issue. Phone button works with Bluetooth just fine but if you use the same button when receiving a call connected over CarPlay it doesn't. It just ends the call or long press declines. Another thing I noticed was if the car is on ignition mode without engine running, same button works fine and collects the call. Weird.

[@FiveStarCarStereoInc]

Sumit G at this point I would give iDatalink a call and see if there are know issues with your application.

[@davidpacheco3837]

I have a 2013 chevy cruze with a kenwood dnx893s and idatalink maestro rr unit installed everything works great but the turn signal volume is not working no sound tried adjusting volume but nothing changed. Tried holding reset button then plugging in cables into maestro rr light flashes red and then solid green. I even tried flashing the box again but no changes still the same issue. Any advice?

[@FiveStarCarStereoInc]

David Pacheco did it come with the add on speaker for the unit?

[@davidpacheco3837]

Five Star Car Stereo nope

[@FiveStarCarStereoInc]

David Pacheco the GM2 harness comes with a speaker that plugs into port B on the RR. It is where all your car sounds come from.

[@davidpacheco3837]

Five Star Car Stereo the installer used iDatalink ADS HRN-RR-GM5 Interface Harness he has the car speaker cables into port b and 3.5 mm plug into the kenwood.

[@FiveStarCarStereoInc]

David Pacheco when the gm5 came out it did not ship with the speakers. It now ships with the speaker. They may have ad old stock. Either way there is a speaker that needs to be there to make the beep sound

[@JslimSlaps]

Thx nice video

[@MajorStaticX]

Has anyone installed a Maestro RR in their Ford, with an after market Stereo, Kenwood DDX396 or whatever, and experiencing Battery Drain?

[@neilbuller5209]

My question is is any of these companies think of semi trucks by any chance I have been trying desperately for well over a year now trying to find some company that makes an interface that will allow me to keep my steering wheel controls on my Freightliner cascadia 2022 to work with my pioneer head unit that I have installed myself alls I want is to be able to turn the volume up and down from my steering wheel controls but apparently that is absolutely not possible because nobody thinks of semi trucks can somebody please explain to me why and why are semi trucks so freaking different than cars it's same freaking systems just a little bit different why can't they like make something for us are we not important I think that question could be answered very easily when things stop showing up on shelves okay I'm done venting you guys have any suggestions as to how I might go about this please let me know I'll take any intel that I can get

[@TheCanineGuy]

Mine stopped reading the tpms ?! Just shows squares. Please help . I have a 2011 f250

[@FiveStarCarStereoInc]

You can go into the settings and restore the RR.

[@lenbata]

Vote for Pedro 😂

[@Jorge026689]

Where you guys located.

[@dowg30]

I have the maestro system and I can't get my gauges to work on my 2009 Dodge Charger R/T Head unit is a Kenwood DNX893S and I have the same problem with my 2006 Chrysler 300 SRT8 Head unit is a Kenwood DNN991HD I been doing car audio for about 15 years now follow the instructions to the T but cannot get it to work it keep telling me that the OBD ll not connected I need help and I put the maestro system in a of vehicles and had it work with no problem at all

[@FiveStarCarStereoInc]

Nathan Neil there was a software update in September for the RR. You may just need to do that. Also make sure the radio is up to date. Did you connect the CAN wires at the ODB2 connector?

[@dowg30]

Five Star Car Stereo the two wires that go to the ODB2 yeah them two wires are connected

[@FiveStarCarStereoInc]

Nathan Neil ok cool, then I would do the software updates and see if that fixes it. If not definitely call them. The first question they will ask is if you did the software updates.

[@PowerHouse28x]

There can be an issue where the vehicle pin out is different than what the Maestro plug was designed for. You may need to move pins in the vehicle harness to connect to the correct inputs on the Maestro harness.

[@pollodelarosa56]

I have the ddx376bt anyone one how to play the videos from a usb to it I tried it on other double like the pioneers it works but on the ddx376bt won’t work

[@patrickgowdy7656]

How do I sync it

[@darrenhenson1711]

Is there a way to allow videos to play while going down the road while using the RR on a Kenwood radio?

[@BeBreezy-zg8fl]

Rca to aux 3.5 mm cable allows. Got a roku to HDMI converter to RCA to 3.5 mm. Works like a champ.

[@TheCanineGuy]

Whats the overhead?

[@joelrod235002]

My climate control pops up, but I cant control it with the touch screen, any reason why? Its a kenwood DMX7706s

[@jessicareviea4513]

NAV1 is not compatible with GM.

[@DaCrazyOne25]

What if the model of your kenwood isnt on the choices to choose from? Lol

[@8094799]

difference between mrr and mrr2 ???

[@TechMechRandom]

Look at the site...there are only a few more additional options.

[@josephcohen7273]

How can i watch youtube from a galaxy 7 edge? It does not have MHL. If anyone can figure this out....

[@jayce5025]

It has the option to retain the ford sync system. If for some reason you want to retain the sync system. Sync is absolute garbage

[@bobkrinsky2117]

Colors was a great movie!!

[@kingguzman01]

1:26 😂😂😂🇲🇽🤦‍♂️

[@djkeys415s]

15150

[@mjahmed80]

lol you keep saying ODB its actually OBD...:)

[@FiveStarCarStereoInc]

+mjahmed80 yes it is because my initials are DB and BD does not sound natural to me. It is a mistake I make all the time. I'm working on it.

[@CCCC-tq8yo]

Dose this work on 2007 chevy 2500 hd classic

[@themoviebay]

Can this help with a uconnect 8.4?

[@FiveStarCarStereoInc]

Deezy from philly it should, what car do you have?

[@themoviebay]

Five Star Car Stereo 2016 dodge journey R/T

[@FiveStarCarStereoInc]

Deezy from philly it does not look good for that car yet. Idatalink say just basic control for that car, no menu control. There is no dash kit yet either.

[@themoviebay]

Five Star Car Stereo thanks 5star!