How to use the keyboard to control the SMTAV PTZ camera?

For more support, please contact us at www.smtav.com Or send email to [e-mail], thank you!
How to use the keyboard to control the SMTAV PTZ camera?
Connect the SMTAV PTZ camera and keyboard to the switch via network cables.
Both SMTAV PTZ cameras and keyboards support POE.
Turn on the cameras and keyboard in sequence.
After waiting for the keyboard to start, press the "SETUP" key on the keyboard to set up the keyboard.
● Keyboard control the SMTAV PTZ cameras via IP VISCA.
Set mode to "IP VISCA".
Then set the IP address of the keyboard to a fixed IP address.
After the setting is complete, wait for the keyboard to restart automatically.
After the keyboard restarts, add the camera to be controlled.
Then add the second camera you want to control.
Select the “CAM1” key on the keyboard to control the camera numbered 1.
Select the “CAM2” key on the keyboard to control the camera numbered 2.
Press the number key, then press the "SAVE PRESET" key to save the preset.
Press the number key, then press the "CALL PRESET" key to Call the preset.
● Keyboard control the SMTAV PTZ cameras via ONVIF.
Set mode to "ONVIF".
Add the camera to be controlled.
Then add the second camera you want to control.
Select the “CAM1” key on the keyboard to control the camera numbered 1.
Select the “CAM2” key on the keyboard to control the camera numbered 2.
Press the number key, then press the "SAVE PRESET" key to save the preset.
Press the number key, then press the "CALL PRESET" key to Call the preset.