No video

Montavue Network PTZ Keyboard Setup Tutorial

  Рет қаралды 4,042

Montavue Security

Montavue Security

Күн бұрын

If you've purchased the Montavue Network PTZ Keyboard, then chances are you're going to need some assistance setting it up. Look no further, this video will take you through getting it plugged in and powered all the way through initializing the keyboard software so you can begin controlling your PTZ cameras.
#controller
#securitycamera
#keyboard
#joystick
#ptz

Пікірлер: 13
@Mlaprades
@Mlaprades Ай бұрын
Poe And wireless would be two great creatures
@repairman2fix
@repairman2fix 2 жыл бұрын
I've got your Montavue system and cannot wait to purchase one of these. Goodbye to the old mouse. YES!!!
@MontavueSecurity
@MontavueSecurity 2 жыл бұрын
Using this PTZ Keyboard is soooo much better than the mouse. Let us know what you think of it once you get it activated! -Payden
@seeharvester
@seeharvester Жыл бұрын
Let me know when you get one that plugs directly into the nvr. I have your 8250 PTZ, and it's annoying to use a mouse to control it. I refuse to connect my security system to the internet so somebody in China can backdoor my camera. I may have to buy from another manufacturer in the future in order to get what I need.
@MontavueSecurity
@MontavueSecurity Жыл бұрын
You could potentially use this keyboard through a PoE switch without the internet. You would technically still need a router but it would not neet to be plugged into a modem, it would simply be necessary to hand out IP addresses within your network but if it was not plugged into the internet, then you would be an isolated network. You can give us a call if you would like a more in depth explanation into how that would work but it would certainly be possible.
@seeharvester
@seeharvester Жыл бұрын
@@MontavueSecurity Okay, thanks. I'll contact my computer guy and let him figure it out.
@mike_x48954
@mike_x48954 Жыл бұрын
@@seeharvester Does your NVR have RS232 port? Because there is options with these keyboards to connect directly to an NVR with an RS232 link. In link setup it showed "NVR" and "RS232" as an option.
@seeharvester
@seeharvester Жыл бұрын
@@mike_x48954 I think it does. I'll have to check. Thanks.
@rodrigorecados01
@rodrigorecados01 Жыл бұрын
Good night friend, how are you, I'm from Brazil and I have a table like this, how do I reset it, have the factory settings ???
@MontavueSecurity
@MontavueSecurity Жыл бұрын
Hi, Rodrigo! To reset the PTZ Keyboard, make sure it's powered on and then hold the ESC (Escape) button until the screen goes dark and resets itself. Hold it for approximately 10-20 seconds. That will perform a full factory reset of the PTZ Keyboard and put you back to the setup portion.
@rodrigorecados01
@rodrigorecados01 Жыл бұрын
@@MontavueSecurity hello friend, I already did this procedure and it does not solve
@drewblueline9679
@drewblueline9679 9 ай бұрын
I have a NVR and get to the point when I hit escape and go into zone control and I enter the ID # and it says fail
@MontavueSecurity
@MontavueSecurity 9 ай бұрын
Hello! If you are following the tutorial and not coming up with the same results, it's probably best to call tech support. Issues like these can usually be solved pretty quick and our tech support line is typically not incredibly busy. The number is (888) 508-3110. You can also email us at support@montavue.com but with something like this, it will likely take some back and forth, so give us a call and we can get your PTZ controller up and running.
How to Live Stream your Security Camera to Youtube (Montavue)
8:29
Montavue Security
Рет қаралды 9 М.
DAHUA NKB1000 : Keyboard Control System Setup
9:20
Dahua Technology UK & Ireland
Рет қаралды 28 М.
Идеально повторил? Хотите вторую часть?
00:13
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 18 МЛН
🩷🩵VS👿
00:38
ISSEI / いっせい
Рет қаралды 21 МЛН
WHO CAN RUN FASTER?
00:23
Zhong
Рет қаралды 43 МЛН
Алексей Щербаков разнес ВДВшников
00:47
How To Use The Dahua NKB1000-E Network Control Keyboard
7:05
Mast Digital
Рет қаралды 6 М.
PTZ Camera Networking 101
11:44
Monte Weaver
Рет қаралды 45 М.
Configuracion de controlador Dahua NKB1000 con PTZ y HCVR
6:10
Brian Ortega
Рет қаралды 66 М.
Montavue Master Class - Wireless Bridge Setup Tutorial
16:04
Montavue Security
Рет қаралды 3,1 М.
How To Setup The PERFECT Home Network For Beginners
17:07
Steve DOES
Рет қаралды 241 М.
Connect PTZ Camera with PTZ Controller using RS485 Protocol
5:01
Setiawan Hadi
Рет қаралды 7 М.
Идеально повторил? Хотите вторую часть?
00:13
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 18 МЛН