How to use the "On The Money" Blade Setter; Adding an Andis T-Outliner Blade to the JRL 2020T

Finally had some time to try adding the Andis T-Outliner blade to the new JRL 2020T.
On The Money Blade Setter: bit.ly/2SMgf5B
Follow Me On;
Website: www.cutsbyreggie.com
Instagram: / cutsbyreggie
Twitter: / cutsbyreggie

[@dmarr4941]

Great video and there's nothing wrong with showing everything. You figured it out and got through it.

[@obsidianbarber223]

Didnt even think of this! Thank you bro!

[@01noi2Ei3Unul]

Reeeeeeeggieeeeeeeeeeeee I LOVE what you do. Thank you 1 milion times

[@mechanicalmonkey7777]

Reggie the blade cover that comes with the jrl is the blade setter .. put it on the blade and click it in place and you’ll see it leaves the screws exposed just losen screws a little and adjust and tighten.. same thing with the madeshow m6 and pop barbers p700 all use the same blade guard zero gap system cuz they all the same trimmers

[@_mattcuts2984]

Dope video 🔥🔥🔥🔥🔥

[@Worldwideblendz]

Reggie you gotta try the JRL blade again when adjusted right i swear it’s the best trimmer out

[@TheSoldierBarberLife]

Which did you think performed better the Andis blade and cutter or the Andis blade with the JRL cutting blade?

[@thaovu9043]

Damnn . U r my idol u know 🙏 . Thank u so much bro 👍 from 🇻🇳

[@FernandoGonzalez-xm8ie]

Thank you for showing an after on how they work with the blade!

[@dc_crush]

This video came on my suggestions lol I can’t believe I never watched this lol

[@yassenmhammed3418]

whata your opnion about pop barber p 700 please ?? is like jrl?

[@soulbarberful]

Which blade did you keep on the still blade or the moving blade by Andis

[@vanntasticschair]

I’m going to try this, I don’t like the JRL 2020t as they are.

[@suzettesmith586]

Mistakes makes it come out close to perfect. Theres nothing dumb about my baby, 👍 job

[@CutsByReggie]

☺️

[@mattbird5292]

Can I put a babyliss blade on a jrl

[@xaviersmith7226]

When you took the screws out of the gtx blade and screwed it down on the jrl trimmer.... does the blade move too high on either side... does it shift at all or does it stay where its supposed to?

[@CutsByReggie]

No it doesn’t slide too much. Once you sturdy it just a bit, it’s pretty stuck where it’s suppose to be.

[@vladankostevski5749]

Are Andis blades better than the original JRL 2020T?

[@gotblendztv4315]

Its cool to see barbers mix n' match theyre tools.... But im to OCD! I could never do that! 😆🤓 💣 video though!!! Keep up the grind, big homie, and shout out from San Antonio, TX, SouthSideCircle92...

[@CutsByReggie]

I am not always a fan of it. I like to use the tool as it come and if it don’t work as is, I usually pass on it. But I had heard some good about this switch so I tried it...Not really worth overall.

[@heavychevy4616]

hey reggie, could i use a gtx blade, & if so, should i use the corded or cordless replacement gtx blade? thank u sir

[@CutsByReggie]

You can use the GTX blade, I would say the cordless one just because if you can get your hands on the new gold GTX blade that would be good.

[@alexxxburnette1990]

When taking those two screws out does that blade stay set? Or does it slide

[@CutsByReggie]

It stays in place thanks to the “white piece” clicking on and then tightening the 2 screws to hold the still blade.

[@xaviersmith7226]

So in order how would you rate them...Jrl 2020t..... gamma evo... gamma hitters... or babyliss fx trimmer

[@CutsByReggie]

Now after using them all for different periods of time I would go: Gamma Evo Babyliss FX JRL 2020t Gamma Hitters

[@xaviersmith7226]

@@CutsByReggie i have the Babyliss FX but i was trying to add a new trimmer... the gamma or jrl... i heard that evo was a true hitter

[@CutsByReggie]

The EVOs are good but one of my favorite cordless trimmer is the .22 Stinger from Caliber.

[@xaviersmith7226]

.22 stinger fresh out the box or with mods?

[@xaviersmith7226]

Which one is your favorite?

[@ask_for_drew2152]

Man I been waiting a month and a half. Contacting them every week and they keep telling me next week next week. To get these trimmers. I just got the 2020c so if your trying to sell a set I will pay full price plus shipping man. Great video

[@angelmatos844]

I got two pairs I have a pair for sale if u want em

[@ask_for_drew2152]

@@angelmatos844 of the trimmers?

[@angelmatos844]

Yea selling the second one they sent me all I need is one I’m in Florida If I send em to Philly they should only take 3-4 days at most to get there

[@angelmatos844]

Me and my family are all from north philly out here in Florida now bro I wouldn’t charge u the full price shoot me 100 altogether n I’ll send them I think I got the box still n shop

[@ask_for_drew2152]

Okay text me 2676409019

[@CobbInterscope]

Yo Reggie I fucks with you bro guys like us have an addiction we say it's so we can educate others when in fact it's because we are clipper junkies we just need an excuse to get new joints all the time

[@CutsByReggie]

😂 I won’t say if you are wrong or right.

[@quest808]

What if u use the GTX blade

[@CutsByReggie]

It will fit but I have not tried it myself.

[@angelmatos844]

Gtx blade and super liner blade work dope on em

[@stk2095]

I think they hit hard for a trimmer i dont use my trimmer to hit to hard because i use my razor to get it sharper

[@Yashinka]

I don't think you actually needed that blade guide once you removed those 2 little screws, it appears that the stock blade didn't have one. Not sure if you've tried removing it from the andis blade completely.

[@CutsByReggie]

Yea, I eventually went to take it off. Not needed

[@jakeroc8120]

Are y’all taking about that rubber piece between the screws?

[@odphadez]

Two words: GTX blade!

[@alessandromonteiro5514]

Ficou melhor,?

[@xthabarber]

So it can be done.....OK 🤔

[@CutsByReggie]

And it makes it a bit better.

[@robertwilliams7842]

If you are putting a andis Blade on It why not just buy andis?

[@CutsByReggie]

Some people might like the machine of one trimmer but the blade of another.