How-To Video: Making a Gummy Bear Lamp

[@FLALabs]

Let me know in the comments what other movie/show references you like to see me make!

[@Prateek1234q.]

God of gummy bears Bow before greatness 🙇‍♂️

[@craiggordon2502]

Did you coat the inside of the whole with resin. You can probably use up resin so you can work on different sides of the cut out but I imagine the exposed gummies in the hole could rot

[@FLALabs]

That's a very good point! I think it would be a good idea to seal in the gummy bears with epoxy!

[@craiggordon2502]

@@FLALabs Cool hope it goes well

[@ryanlucia9892]

Pretty cool man! Might I suggest, coating the gummybears butt cavity with epoxy to encapsulate the raw gummybear flesh after drilling... Could get ants if you don't!

[@FLALabs]

That's a great idea! If ants start coming around, I will definitely give that a try!

[@Jyzenman]

Next time it might be easier to create a "sacrificial" piece of the mold for the hole. Just hot glue it to the inside of mold and remove after you've pulled out the whole piece. Kills two birds with one stone, the hole and making sure all the gummy bears are sealed in with resin.

[@FLALabs]

I love that idea! Thank you!

[@williamg4734]

A router would probably be a better way to make that hole in the gummy bear light but you would have to set up a jig and a vacuum to extract all the chips. As far as cleaning forsters just take a torch and burn that thing off

[@FLALabs]

Thanks for the advice!