How to Vinyl Wrap an Epoxy Tumbler so it Shines and Sells

Learn how to make any tumbler STAND OUT using vinyl wraps and epoxy resin in this crafty DIY tutorial. Steps include prepping the tumbler, applying vinyl, adding glitter, sealing with epoxy resin coats, and final reveal.
Follow along guide here: www.theepoxyre...
00:00 Intro & Supplies
01:32 Applying Vinyl
03:26 Adding Glitter
05:08 Sealing Vinyl
05:34 Final Epoxy Coats
08:03 Second Epoxy Coat
10:29 Final Reveal
Required Materials:
Tumbler spinner www.theepoxyre...
15 oz tumbler
Tumbler's Lightning Epoxy (from the Epoxy Resin Store) www.theepoxyre...
Pink glitter (from CNS Glitter)
"Kiss the Girl" chunky glitter (from Freedom Glitter) www.theepoxyre...
Mixing sticks and cups www.theepoxyre...
Torch (small or large)
Vinyl sheet
Paper slicer
Sanding block
Steps: Preparation:
Remove the tumbler's lid and set it aside.
Use a sanding block to scuff the entire tumbler for better adhesion.
Vinyl Application:
Cut a straight strip of vinyl.
Wrap it around the tumbler, peel the backing gradually, and smooth it down with your hand.
Applying Glitter:
Tape off the vinyl section.
Mix 5 ml of epoxy (2.5 ml of Part A and 2.5 ml of Part B) and mix for 60 seconds.
Apply the mixed epoxy to the tumbler.
Sprinkle "Kiss the Girl" chunky glitter and pink glitter over the epoxy-coated areas.
Gently press the glitter down to ensure it sticks well.
Sealing Glitter:
After about 5 minutes, remove the tape.
Apply 10 ml of epoxy over the entire tumbler to seal the glitter and vinyl.
Final Touches:
Use a torch to remove any air bubbles.
After about 40 minutes, add decorative lines if desired.
Apply two more coats of epoxy over the entire cup, using a total of 15 ml (7.5 ml Part A and 7.5 ml Part B for each coat). Mix for 60 to 90 seconds before applying.
Ensure the entire tumbler is covered evenly with epoxy, including the edges and bottom.
Torch again to remove bubbles.
Curing:
Leave the tumbler to spin for about 20 minutes, then turn off the spinner but do not touch the cup for another 45 minutes.
That's it! Look at how pretty this turned out. Thank you so much for watching. Don't forget to like this video, subscribe to the Epoxy Resin Store's KZbin channel, and follow them on their social media platforms.
👉👉 If you liked this video and want to see more
👉👉 Comment "Epoxy Resin Tutorial" because that does two things.
1. It lets us know you like it, and encourages our creators!
2. Commenting gives you a chance to win within one of our upcoming givesaways. -hint-hint
www.theepoxyre... is an expert manufacturer of various epoxy resins that can be used for both craft projects and industrial applications. We also offer liquid inks, dyes, pigments, glitter, other additives, and tools for various epoxy resin projects.
The Epoxy Resin Store
[e-mail]
Phone: [phone]
Address: 540 Crane St suite A Lake Elsinore, CA 92530
www.theepoxyre...
Social Accounts:
/ theepoxyresinstore
/ epoxyresinstore
/ the-epoxy-resin-store
/ @theepoxyresinstore
/ theepoxyresinstore
#epoxy #epoxyresin #theepoxyresinstore
*We may use affiliate links to products we like, meaning if you buy something, we'll receive a small commission.

[@josephhinnen7614]

Amazing epoxy 1:45

[@TheEpoxyResinStore]

Hey, thanks for the comment. Do you see yourself creating this in the future?

[@Singz1]

Epoxy resin tutorial , Nice video

[@TheEpoxyResinStore]

Thank you! Cheers!

[@MariaLopez-yu3mv]

Epoxy resin tutorial

[@KeeshaRobinson]

Amazing Epoxy 🎉❤😊

[@KeeshaRobinson]

Very good video. Love gow she is explaining things as she goes like mistakes that could happen. ❤may try cups again 😊

[@dianegill7781]

Do you have to use permanent vinyl