Hey, it’s a sawmill-it’s functional and looks great!
@12ar34sw3 жыл бұрын
I am sitting here watching you work, while I should be in the shop building my sawmill. Yeah, the coffee is gone, back to work.
@sawingwithsandy3 жыл бұрын
Ah well, always time for a break
@bwillan4 жыл бұрын
There is nothing more permanent than a temporary solution that works. Good job on doing the roll up tarps. The tarp wall should certainly keep the bulk of the rain and snow out of the Hillbilly Hideout 2.0.
@waynespyker57314 жыл бұрын
Good for rain but not snow proof. Sheltered in the woods perhaps but I'm on a hilltop, snow even blows through my ventilated ridge cap! South central Pennsylvania border near Baltimore, Maryland.
@bruceriep8033 жыл бұрын
A chainsaw-carpentry scarf-joint! Love it!
@Cherokee10g2 жыл бұрын
Love your heavy thinking, you are going to do just fine!
@kenball85264 жыл бұрын
That is a beautiful supervisor you have!!
@sawingwithsandy4 жыл бұрын
Koda sure is a good supervisor to have a round
@eddycalix377212 күн бұрын
4 year old video. Still coming in handy. The tarp roll up is mint. I think I'll use a pcv pipe at the bottom end of the the tarp for easy roll up.
@charleswise48314 жыл бұрын
Love your information, your transparency, and your passion! Thank you for sharing with “us”!
@sawingwithsandy4 жыл бұрын
Thanks Charles appreciate that
@pwengert14 жыл бұрын
That’s going to be so much better with a little protection around the mill. Great job. We enjoy watching your videos. Stay safe.
@sawingwithsandy4 жыл бұрын
Thanks Phyllis! Should be a great addition
@brucestmartin7774 жыл бұрын
Great solution! Those will definitely last the first season ... and probably 2. She’s a beauty!
@sawingwithsandy4 жыл бұрын
Thanks Bruce. Fingers crossed 🤞
@tkishkapesilurian42814 жыл бұрын
I have been playing with the idea of building a pole barn type shop for my WM130. Thank you for letting me see how you have met the challenge of building the shop building by yourself. I am 70 now and working mostly by myself since my main helper is suffering from cancer and not able to help any more. Thank you for the inspiration to build an all weather enclosure.
@sawingwithsandy4 жыл бұрын
Glad you were able to check out the video. I’m sorry to hear about your helper. Please send my well wishes
@yvesjolicoeur7474 жыл бұрын
I like it a lot. Good job once again. You are a great testing lab...lol...as we are planning to build a sawmill shack next spring. I agree with you about the reason to use tarp...it is so nice to work outside.
@markb14874 жыл бұрын
We tried tarps for doors about the same span,, the wind ripped them in less than 2 months,, we did this twice.. Same thing happened.. The wind finds the weakest point, and slowly starts ripping.. We eventually had to put up tin sheets.. Wind never bothered the sheets.. Great video. Really really good... 👌👍👌
@oldcountry2204 жыл бұрын
Woohoo curtains are up great job Sandy! Been waiting to see this.
@sawingwithsandy4 жыл бұрын
Thanks! I
@wardo174 жыл бұрын
Glad to see you are adding the tarps. That is what we had on a woodshed to keep it dry. On sunny and windy days, we would just raise it to get rid of any dampness. They also work great to keep the bitter cold winds off of you during the winter.
@sawingwithsandy4 жыл бұрын
Sounds like it should work nicely. I likely will keep it up for 3 months of the year and roll it down when they’re calling for snow. Thanks for watching. Hope all is well
@davemclelland92924 жыл бұрын
Great project.... so well thought out Sandy .....like the first aid kit idea too... .:-))
@cwwhite513710 ай бұрын
Great job, brother! Looks like a nice project is finished. Chip
@wardvanderberg14034 жыл бұрын
I'm really enjoying your posts and am glad I stumbled on them. I like your basic approach and thought processes to your projects. Keep on keepin on!
@sawingwithsandy4 жыл бұрын
Thanks for watching Ward
@heyyoubuddy67494 жыл бұрын
Hey there buddy how are ya? The hideout is looking good. I like that it will protect the mill your work space and you. Thanks buddy for taking us along
@sawingwithsandy4 жыл бұрын
I’m doing well thanks. Hope the same for you as well. Coming along nice eh. Almost done
@troysixberry88284 жыл бұрын
I think it looks great. Good idea too. If you like it after you’ve worked with it a while- I may try that myself. Thank You, for sharing.
@sawingwithsandy4 жыл бұрын
Thanks Troy. I’ll be sure to update everyone after using it for a while
@simplyraw1369 Жыл бұрын
I like being outside to dont want to feel like im cooped up in a building 😊 great build
@dougsmith5484 жыл бұрын
Hooray success congratulations it might not have worked to your satisfaction the first time but it worked. Good enough.
@sawingwithsandy4 жыл бұрын
Thanks Doug!
@mapletreehomestead34374 жыл бұрын
I have used this method several times in the past! It looks great and it’s only fitting that you used the white hockey rink tarp! I love it!!
@hessel91544 жыл бұрын
a low budget construction ... nice !!
@bakervinci1632 жыл бұрын
Pushing the limits of that ladder. I’m a one man builder as well. I’m doing the same thing with a similar build. I want a heavier tarp. I’m protecting an expensive bass boat.
@DavidRobinson-mx6cl4 жыл бұрын
Awesome job, very good idea, I will probably use it myself!!!!!!
@sawingwithsandy4 жыл бұрын
Thanks for watching David
@karencary33124 жыл бұрын
I like. I like. Good job. You may need one on the 4th wall, too. Time will tell.
@resolutekravmaga6514 жыл бұрын
I'm so addicted to this channel! One idea, instead of the bungy cords is to get strips of velcro on the corner posts and along the bottom at the front. Very simple and easy to install. I've been thinking it would be great if you could also make a saw dust trough along the back side to collect you dust. But, I just don't know if it will end up blowing the saw dust straight out of the trough or not?? Love the channel.
@abudden32564 жыл бұрын
Hi Sandy, I have the same 130 model as you do and left it in the box for a year while I figured out how to protect the investment! I'm in British Columbia and work on a golf course. I was able to cut down a couple of cedar trees that had double tops and a 30 foot log for my front beam. I also used cedar logs for the back 3 posts. I have 18 feet wide landscape fabric so used this on 3 sides. I saw on another channel that he was going to use the off cuts as siding leaving gaps between them to get air flow after all who wants to breathe all that sawdust!
@sourdough514 жыл бұрын
If you're concerned with gale force winds, just screw some pieces of 1x2x23 between the grommet holes. Love your channel!
@Z-Bart4 жыл бұрын
People keep saying wind wind wind. He's in a Huge plantation. AKA wind blocker. He ain't on the open prairie. 👍
@johnrigden84513 жыл бұрын
Sandy, if you use a small round pine log (. consistent in size the whole length) instead of the 1x material, your tarp will roll up better, like you imagined it would. Very nice build!!
@lowellgates56524 жыл бұрын
Possibly use ball bungees at the front corners to connect the end tarps to the front tarp.
@JL4ever4 жыл бұрын
@Lowell Gates This was exactly my first thought. I've used tarps for many years and one thing I have definitely figured out from being in a very high wind area is that the tarp needs and will last much longer with some flexibility. I buy bags of 100+ bungees and use them accordingly. Sometimes using 2 or 3 depending on the situation to make it longer as needed. That has helped tremendously. Another option is buying a large roll of elastic rope and using that as needed. For poles I wrap rope around it leaving a gap to run the ball bungee through each loop so that I don't have to use hooks or drill into the pole. One of my biggest drawbacks here is high winds and insane sun exposure which destroys the bungees and ropes. But the tarps hold up really well so replacing bungees/ropes is not bad at all. I just added a 20x40 steel roof to my shipping container and going to wrap the sides this way for the time being until I go full metal. Oh, and I've learned that the tarp lasts a lot longer if I add 2x-3x more loops for bungees. The more points to attach to the less tearing happens.
@JL4ever4 жыл бұрын
Just trying to figure out how to get it to roll up on its own so as to not fight it the whole way up. 🤔🤔
@MetaView74 жыл бұрын
Looking good !
@danbraun37804 жыл бұрын
Good job.
@russcollins43064 жыл бұрын
Looks good Pal, if it continues to get warm, you'll be figuring out how to stay cool. lol
@miguelnoriega84202 жыл бұрын
Great explanation, thanks!
@sawingwithsandy2 жыл бұрын
Thanks Miguel
@bradlloyd3582 жыл бұрын
I’m thinking of doing the same thing with mine - for the same reason - I would rather mill lumber outside then in - but I want the mill out of the weather - Thks for the video
@sawingwithsandy2 жыл бұрын
Nice to get a good view for sure. Thanks for watching Brad
@woodintheblood41044 жыл бұрын
A first-aid kit at the sawmill probably wouldn't be a bad idea.
@RANDALLOLOGY4 жыл бұрын
I think that would be an excellent idea 👍
@tomki6asp4 жыл бұрын
Put Quik Clot in the kit.
@jasper80924 жыл бұрын
You mean super glue and electrical tape?
@tomki6asp4 жыл бұрын
quikclot.com
@paulvanhouts72912 жыл бұрын
Add a pair of splinter forceps and a 19 gauge needle. The needle works great in opening the skin over the splinter so you can then remove the splinter with the forceps. Then something like betadine and a bandage. Take care of yourself. Try adding some weights in the bottom tubes to give resistance when the blind is rolling up. I have used pvc pipe with sinkers through the inside. The sinkers are on fishing line and held separated by knots then the line is tied through small drilled holes.
@emilecrotteau73124 жыл бұрын
Looks good that should work excellent 👍👍👍
@georgeh99674 жыл бұрын
fast cheap and easy, replace every 2 years as needed, does the job.
@flamingochick579 ай бұрын
now you got the hang of it!!
@okieproperty91414 жыл бұрын
And by the way, you may want to consider putting bunks on skids. That way you can move them when you open doors to mill. Might work for you. Whatever you do, I'll be watching. Thanks.
@flashfire32204 жыл бұрын
I bought a large vinyl billboard sign 15X30 that cost around $50.00. Heavy tarp,advertising on one side and black on the other.
@Tradesman11564 жыл бұрын
I'm planing my mill shed and thought I may use a tarp system on the front wall too.. I was thinking (as some have suggested) of using the banner material from old billboards. Rather than a roll up I may use a cable stretched across the front behind the beam. Attach the tarp with metal rings(chain links). Fasten on one end of the tarp with screws, use Spring snap links on the other, and use bungees to hold it to a post when it is open. Not sure how I will hold the bottom.Maybe a rope through the eyelets to a snap link. In the sign business we would often put slots in banners so the wind would be less of an issue. There are lots of ads for the used billboard (Banner ) material Thanks for the videos. I really do enjoy and look forward to them!!
I like your new video today you did a really good today it looking nice buddy
@sawingwithsandy4 жыл бұрын
Thanks Travis!
@traviscover5904 жыл бұрын
Good night too you guys buddy
@TheDivergentDrummer7 ай бұрын
Aces brother. i was just looking at how to get mine to roll up. I use a piece of 1x2 through the bottom of my Shelterlogic. I'm thinking, if i wrap the rope around the one end of the 1x2 It would effectively use the pole / 1x2 at the bottom as a 'pulley' thereby rolling it as you pull the cord to roll up, or the other cord to pull it down. If i do it at both ends, it stands to reason that it would roll each end equally, creating a nice roll. Adding a little back pressure on the feed line into the 'pulley' this has created, should yield a nice tight roll. Think mini blinds, only the bar is at the bottom not the top.
@craigclayton45144 жыл бұрын
Hello Sandy ; the wind on Sunday sure shock the Province of Ontario. The Hay stack tarp arrangement from PA stood the test and the outer white poly was still in place after the storm was over. I made a video of the Haystack tarp on my site. From Uxbridge Ontario Craig Clayton
@marknichols78614 жыл бұрын
We had one of those 10’ x 20’ enclosed tent carports. I had to put para cord on the walls - two cords together with the tarp sandwiched between the cords. The cords ran horizontally, tied at each end, so they were strumming tight. I had two sets on each wall, dividing the wall in thirds. This kept the material from flapping in the wind, which is the death of tarps and tents.
@bakervinci1632 жыл бұрын
Nice build on the structure. I’m doing the same for a boat shed
@donlatimer51144 жыл бұрын
Sandy , cut yourself some 4 x 4 post , then find the angle to put your braces on the under sides of your beam and post for corner braces instead of nail them on the outside , this will make I cleaner look do your sawmill shed ... On the backside of saw mill shed put a girt about 3 foot off the floor and then fasten some siding boards to it , this will give you some protection from the weather on the backside and still leave you room for your sawdust to exit the shed ... you might want to think about putting some two by fours crossway under your sawmill frame every 16 inches to 2 feet to allow you to blow the sawdust out from underneath the sawmill frame
@allenchancery48474 жыл бұрын
Hey there my buddy kota inspecting things,, nice job
@brianmurray17344 жыл бұрын
Very impressive
@sawingwithsandy4 жыл бұрын
Thanks Brian
@koningbolo47004 жыл бұрын
4:36 Movie Night at the Sawing Sandy Greenwood Cinema Facility !
@jeffselchow57194 жыл бұрын
Effective temporary element blocking. I have a tarp covering my wood for my smoker, 4'w x 3'd x5'h, tarp is exposed to all elements and now, 5 yrs old, is ripped and torn and needs replacing. It worked for me, I suspect this will serve you well for a couple of years until you can put in place something a bit more robust. Best of Luck.
@danmaciosekmaciosek61664 жыл бұрын
Great videos
@sawingwithsandy4 жыл бұрын
Thanks Dan!
@Mike-vo8nk4 жыл бұрын
If you want a more permanent solution try some sliding barn doors on the front. You could build the rails for the doors on outriggers at either end so they slide all the way open. Cover the doors in polycarb roofing so they will be lightweight and let the light in. You could then add hinged doors on the short sides and they can open back out to the outriggers. 10 minute job mate :-)
@exotictones10544 жыл бұрын
The wind the wind my friend. That's you enemy here.over the years farming one of the biggest purchase every other year was tarps if the move they will loosin up n rip but the shack is looking good.
@mikekehoe29274 жыл бұрын
Thats allmost what I had envisioned. Iam not sure how to make it roll but it not like your going in and out like a door. I mite wall off the back but a tarp would do. Looks great.
@win18854 жыл бұрын
Wind is going to be your biggest problem with tarps.
@dr56744 жыл бұрын
I agree, wind is going to be an issue.
@iceroad4164 жыл бұрын
great idea!
@SuperHurdman4 жыл бұрын
Sandy here is a long time solution for something that might interest you! Get one of those accordion doors you see them in a strip mall when they shut up their stores for the night now their quite expensive but if you go to a mall close to you sometimes you can purchase one second hand I used one at my parents they had a carport and every year my father would put up obs board which worked but was time consuming and also made the carport like a dungeon I think I got that one for five hundred they loved it and still have it to this day! I recently picked one up because I want to build a out door kitchen and i got it used for 200. I saw someone use one for a air plane hanger you will love it and gives a open type feeling and in summer you can open it up in literal a couple minutes I have it on my wood shed waiting to put on the kitchen go tomorrow to my FB page and check it out!
@idadho4 жыл бұрын
If you use a larger diameter pipe, it will roll up better. 4 inch PVC drain pipe will work great. Even a 4x4 with edges chamfered into a octagon will work. The weight of the 4x4 will hold the tarps down when a wind comes up. You might even have a 4 inch diameter tree that you can peel and use.
@larrykluckoutdoors82274 жыл бұрын
Looking good
@PatCoutu-f3w6 күн бұрын
good ideas
@MrRickoscar4 жыл бұрын
Nice.
@brianmorrow66864 жыл бұрын
Looks really nice. Use cheap 2" strapping (ratchet type) instead of rope and it'll roll way easier. Additional strap front middle will also aid in rolling. You only need enough strap from beginning to just under full extension.
@okieproperty91414 жыл бұрын
Put walls on hinges. Like a door. Then use heavy guage screen. That way you can close doors and then open when you're using sawmill. When closed doors will keep out snow and rain. Just put a drip edge at top for rain.
@mauso120124 жыл бұрын
I used a system similar in my greenhouse to cool it off . Only half way up though.
@daveklish72743 жыл бұрын
Sandy, I found your channel almost 2 months ago and immediately subscribed. You put out nice videos with lots of information but without sounding like a know it all. I had a Peterson 4' cut WPF sawmill since 2004. I used to do portable milling and haul my mill around, but I quit that part of milling about 10 or so years ago, opting to mostly saw for my own needs, but on rare occasions I cut for others at my site. To my point, I don't have any 4' diameter trees on my property so I no longer needed to be able to saw such big logs. Thus, I just sold my mill, and ordered a WH130Max, 16'+ cut (1 track extension). I like the saw shed you built, if you were to build it now, after using it for a while, would you change anything? I plan to build one much like yours, not only the saw shed, but the lumber shed, a log deck and slab cuts rack. I see your saw shed is basically the same length as the track, would you build it longer now? I was thinking I'd like it about 4-5' longer on the cut starting end, but then maybe carrying lumber to the drying shed might end up hitting everything on the turn. Your thought please
@Cjnchef4 жыл бұрын
Simple solution is always the best. Hell airplane hanger doors if money is no object. Great solution
@sawingwithsandy4 жыл бұрын
Thanks Leith
@michaelhodges38414 жыл бұрын
Hi, try replacing the single pulley with a double pulley. At the first double pulley use a couple of cable clamps and 6x50mm dowel on the two ropes. Trim one rope and run the other through the new double pulley. I've done that on my chicken house. Nice build. A wood stove and a coffee pot then you will be all set.
@howtodave17254 жыл бұрын
now the bears have a place to get out of the wind
@sawingwithsandy4 жыл бұрын
Haha pretty much (and coyotes)
@Grizz2704 жыл бұрын
ive heard that if you use painters tarp made of cotten and roll on thompson water seal they make great affordable tarps but are combustable ..also maybe instead of rolling up the tarp have a rop on the inside and outside so when you bull it up it bunches the tarp instead of rolling up ...just a thought
@russcollins43064 жыл бұрын
You may finish the other half of the roof in a couple of years. Then the two ends would be your only concern. Looks good
@koningbolo47004 жыл бұрын
Wooden side walls set between the corner posts with a bump out lining up with the eves would give you storage space / very deep window sill if you were to put in (reclaimed) windows in the bump outs...
@neutralmind60474 жыл бұрын
If fasten the rope to the tarp it will roll up great job
@davidvansickle5634 жыл бұрын
If you can for future, find advertising companies that own billboards, when they discard old ads they work excellent as tarps. Think materialthick material
@josannefromin77504 жыл бұрын
U are great, just do what works for U
@sawingwithsandy4 жыл бұрын
Thanks Josanne
@rosethroop84104 жыл бұрын
You need to keep the tarps from hitting the wooden posts if you do not you tarps will be damaged. Good job on the mill shed.
@RobertJLessard4 жыл бұрын
I think no walls but maybe large multi hinged doors so you can open it all up and have the open feeling.
@seanboers99534 жыл бұрын
You may find the tarp rolls up better if you used a wider diameter pipe. Something like a 3" or 4" PVC sewer pipe. The small pipe has too tight a radius to roll with the string - it gets lifted instead. On the large opening - I would add a few more ropes towards the middle. To avoid pulling too many ropes - bring them back to a central location and tie them off to a single rope.
@barrelfish81064 жыл бұрын
open eye-hook screws on the posts to hook tarps? nice work
@jeffbradley814 жыл бұрын
winter time wood burner
@OGDucknCover4 жыл бұрын
I think it looks great, even if it's just a temporary solution.
@jeanlefebvre64583 жыл бұрын
Wher are you in Ontario I’m in Cumberland I have a champion sawmill I like watching your videos 👍👍👍👍
@JimDockrellWatertone4 жыл бұрын
The grommets on the side tarps look like they line up with the front tarp....a few cheap carabiners to attach them together would button up that corner pretty good. At least stop both edges from flapping in the wind.
@michaelodonoghue74644 жыл бұрын
Negative Five Degrees Celsius would be eminently more enjoyable for Me Personally than the 38 Degree Celsius Weather I'm going to be getting this (Australian) Summer. Stay Safe, Stay Chill.
@sawingwithsandy4 жыл бұрын
those temperatures would cause me to melt haha. Thanks for watching Michael, hope all is well
@windycityselects22143 жыл бұрын
Could you do a slower more detailed look at how you did the pulleys?
@kingmuppet70234 жыл бұрын
Run, the trees are fighting back..........Plot for new movie.... "WHEN TREES ATTACK"
@sawingwithsandy4 жыл бұрын
....on the next episode of "Sawing with Sandy"
@MrWaldorfian4 жыл бұрын
If its raining and snowing, wouldn't you want the tarps in the down position?
@kenball85264 жыл бұрын
Check how it’s done on the big sailing ships.
@koningbolo47004 жыл бұрын
I think the back wall needs to be closed off with a lengthwise pull up flap to allow the sawdust flying out when you are lumber jacking.... Na maybe a door to the outhouse facilities... ;-)
@toddmeanie60034 жыл бұрын
In my opinion the Rope will cut the tarp eventually you might try to make you a crank system like an old speed wrench made out of 1in PVC pipe and make a U joint to go on the end of the pipe out of PVC pipe and a block of wood..... you know like they used to do roll up tarps on a grain truck
@rickvollick42133 жыл бұрын
I’ve beeen looking for a Woodland Mills cap. Any idea how I can get my hands on one?
@sawingwithsandy3 жыл бұрын
I’m not sure how those get distributed
@richvail75514 жыл бұрын
Quick question, when milling wood from recently dropped trees do you need to cut a thinker piece to allow for shrinking as it dries?
@sawingwithsandy4 жыл бұрын
Normally I’d cut the piece thicker than I want for my finished dimensions. For rough lumber I don’t pay too much attention to shrinkage since I am building with lumber before it dries.
@richvail75514 жыл бұрын
@@sawingwithsandy is there much shrinkage in lumber as it dries? I was thinking of giving it a go this year and I wanted to make that my dried lumber was still within the standard that I was shooting for. Thanks
@sawingwithsandy4 жыл бұрын
You will get width shrinkage. Depends how much by the species of wood. If I wanted to be certain of a certain size I’d cut it atleast 1/4” wider than the finished width I want
@richvail75514 жыл бұрын
@@sawingwithsandy perfect, thanks.
@terrycarl89234 жыл бұрын
You made a greenhouse
@MrHowieZ19734 жыл бұрын
Looks good to me. :)
@danfreitas79054 жыл бұрын
It's easy to criticize sitting here but...why not install wood siding on the West end of the mill and backside of your shed? Put in window openings in if you need to see through using your tarp idea to cover them when it storms. Seems like that would help cut the wind and make the shed a little more comfortable. Good job overall.
@sawingwithsandy4 жыл бұрын
I may end up doing that down the road but for now I need a place for the sawdust to go out