How to Weld a 2G 2-Inch TIG All the Way ~ Tulsa Welding School

#welding #welder #tigwelding
In this video, Tulsa Welding School instructor Justin Buller shows you how to weld a 2G 2-inch TIG weld all the way.
Tulsa Welding School was founded in 1949 by two welders who recognized a strong demand for skilled tradesman in their industry. Over 60 years later, Tulsa Welding School (TWS) has evolved into an educational institution that prepares students for various skilled trade careers with a multitude of specialties and applications. Graduates from Tulsa Welding School are trained to have the knowledge, skills and essential attitude to immediately enter their chosen profession.
To determine which program will be best for you, visit: www.weldingsch...
Connect with us:
Facebook, Tulsa: / tulsaweldings. .
Facebook, Jacksonville: / tulsawelding. .
Facebook, Houston: / tulsawelding. .
Twitter: / weldingschool
Instagram: / tulsaweldingschool

[@dustinrichard8674]

That tac was a damn caterpillar 1/8 my ass that's too heavy

[@ryangunter295]

Was going to say the same thing 👍

[@ronaldray1827]

Yooo thats my teach on the weekends this guy is dope !!!!

[@zachgage3303]

Big thanks to Justin. Great teacher that really takes pride in his students.

[@fredycastro2557]

That was a great example of a professional tig welding, I were just a stick welder and I never get experience on be welding and talking as you do, thanks for sharing your knowledge from Snjo ca thank you.

[@sundarkiranmadanu1192]

much respect for taking time to teach us all the skills you got. stay safe. take care

[@jaredclark6503]

Can appreciate this guys hard work on this video but I’ve been in this trade for 35 years and you don’t need a 5/32” gap to weld pipe. Heavy 1/8” is effective. Only time I use a 5/32 and back feed is when I’m doing Heavy wall with a lot of high low mismatch or when the fittings are bigger or smaller than the pipe. Then i May transition the pipe or fitting to get a better fit up.

[@brandon13kitchen]

Teaching skills/knowledge and ability to explain what's happening 10 out of 10 Tig welding ability 6 out of 10 Cap is 7 out of 10 Root 3 out of 10

[@earlgallup5223]

I thought you was going to say 10/10 every time

[@earlgallup5223]

I used to make those same Welds on the landing gear on the space shuttle in 1983. Titanium reinforced chromoly weld. At950 amps

[@matchuyallis7269]

Please, feel free to share more

[@michaelriccardi424]

I also want to hear about that

[@gregcampbell3064]

Nice job, great video, When I took my test on 2G they required the fill and cap with 3/32" 7018. It would be cool to see your technique on that because it's always interesting to see how others do it and learn new methods. Thanks.

[@edmundcordero939]

As of now I'm regularly doing this kind of weld for steam line i love to see and learn some new techniques and learn cause I know I'm still lacking and I need to learn more. Thank you sir

[@user-dk3ug6wd2i]

Thank you for the good video. Is the material carbon?

[@robsoden8426]

For those that missed the tip for learning to walk the cup. I learned the same way. I took the head of the torch off the hose. Sit on the couch and watch TV and practice. This will teach you not to push the cup.

[@WDSINC]

Real quality

[@chicagoone1]

All I know is good work sound like you was making love to this but if it's a passion its a passion 👍👍

[@letitshinewelding3787]

Awesome work Justin. Much respect brother. Truly put hard work and passion on your welds and I know your student appreciate that very much.

[@xKitKatx-]

Tulsa Has a HORRIBLE HORRIBLE REPUTATION out in the field. The students can’t get a job with Tulsa Welding in their resume. The guys I’ve known replaced Tulsa with Field Training 🤡🤡🤡🤡.

[@letitshinewelding3787]

@@xKitKatx- that may be true! However, in the 3 years 3 months I’ve worked at TWS I’ve had a few hundred graduates successfully complete the program and have since had a career in welding. You are more than welcomed to come for a visit any time for a one on one tour. When I first looked at TWS, they did have bad reviews. As a welder, I was at a point in my life where I could step away and instruct. So instead of talking, I stepped inn to help and assist those trying to change their lives for the better.

[@xKitKatx-]

@@letitshinewelding3787 all that school has to offer is basic welding jobs that pay below 17hr. This school has NO PIPE jobs or anything over $20. This “school” is a joke. And should be shut down. 90% off classmates don’t even have a job after 6 months of graduating.

[@xKitKatx-]

@@letitshinewelding3787 to THIS Day no one will hire anyone that went to Tulsa. Students don’t m Ke how to even run a decent root, cap, and a torch. Y’all just takin their money. And sellin them a dream

[@letitshinewelding3787]

@@xKitKatx- Again! You more than welcomed to stop by any time. We could go back and forth all day long and not get anywhere.

[@ziaurrahman5372]

Good welding sir.from Bangladesh 🇧🇩 Junior tig welder 🥰

[@michaelivey7517]

Thank you Justin. Good video!

[@johnnyrivas4506]

I thought back purging would be necessary in order to keep it from sugaring on the inside or am I tripping. I usually leave a 1/16 or a max of 3/32 gap and do 4 tacks. Im fairly new but thats what the OGs at work suggested I do. We weld stainless steel pipes for caterpillar gasoline engine turbines and every single weld bead is ran through x-ray.

[@Rome3aaro]

Thanks for this video‼️ very detailed 🙌🏾🙌🏾

[@jamesposs]

I loved this! I graduate this month from Southern career institute. I really enjoyed watching this

[@tebza4826]

Great video, I like it, you're a instructor 💥💥💥💥👌💯💯💯

[@yomommasgardener9648]

Badass teacher

[@damjanristevski7599]

Great video !

[@josessupersport133]

Respect ✊

[@eragswagg1592]

Great job buddy

[@jedhatcher252]

Where's Yale at???

[@mddenis1]

Very good, sir!

[@taylormuddin2]

After working with the hands that graduate from Tulsa school... I wouldnt trust a word this video says. Ain't none of them hands welders.

[@yomommasgardener9648]

Ok and?

[@scottbumps7738]

Root would not pass X-ray. Excessive reinforcement. Thank you for sharing your knowledge.

[@brianthomas7407]

lmao that would shoot all day

[@yomommasgardener9648]

It shoots 😂

[@user-qs7ed9xd5b]

nice videos😊 ありがとうございます♪

[@jeepwk6.5L]

Are weld test won’t allow over an 1/8th root gap :/

[@timoteosoares3118]

How can um stop the arc on top of the weld with a scratch start?

[@marvinpenman4944]

what was your amperage on the caps?

[@DavidGutierrez-zi4dy]

thanks!

[@drackoglobal]

How much to train for argon welding

[@jeremytinker2311]

What kind of Kleins do you use to cut the filler wire?

[@deltathunderfalcon8512]

No. 9 lineman’s work great! (Blue grips)

[@EllisNutt]

The ones he actually have are the Knipex Mini Bolt cutters. He mispoke about which pliers he used. I also use Knipex mini bolt cutters and its like butter. Make sure you get the knotched version cuz it really helps with that 5/32 wire or anything bigger. Makes cutting stainless wire easy too

[@mohammedtroy4296]

root too heavy

[@Heikin-Ashi-Larry]

You busted on the first tack😂

[@joshuarenteria7312]

The root is to heavy you'll bust out and your tie ends aren't consistent with your root..

[@dieselphiend]

Man, with gravity as it is, and hot droopy metal, you gotta wonder why they want a 5/32's gap on the tube. It's better to make your tacks on the vert side of the tube so that gravity isn't working against you. He may have been welding like that so that we could see it better.

[@CR-nn1by]

I don’t think that root is above 1/8th, he will bust for that dingleberry if it’s above 1/8

[@brianthomas7407]

phaser ray would probably be a no go but that would pass xray all day, ive seen way worse than that in the field pass xray

[@codetalker3135]

That’s gonna pass phasa ray n X-ray all day. It’s not perfect root but it’ll shoot. Best way to weld tubes is hot n fast give it a tight 1/8th gap n run ur torch at 150-170.

[@vincebondy5075]

Use a scotchbrite to clean filler rod then wipe off with acetone soaked rag . Gap is too big for nuclear application !! But someplace to start .

[@brianbeaubien7371]

❤

[@khristopherframe8755]

You wouldn’t have made it past the tacks in my test booth!!

[@earlgallup5223]

Do you think he would at least made its third base?

[@brunaogoncalves4209]

Can immigrants take the welders qualification test?

[@youknowiaintworried]

Yes

[@brunaogoncalves4209]

@@youknowiaintworried you and welder?

[@socalfresh6519]

That was my teacher

[@chiefgwopp1004]

*The Man Can Barely Breathe, Give Him A Break. That root is a NoNo Just by eyeballing it*

[@ronaldmontoya5202]

The root pass is not good, it is deformed, the presentation pass has undermining of the base metal

[@ravikoralagamage307]

❤❤

[@Maxladecoupe]

Elle servent à quoi tes lunette vieux?

[@fisbondondandala8757]

Not bad

[@jariolavilaitila5600]

Finland boilermaker say Buller you not coming work tomorow

[@dwaynemetcalf9861]

Guys come from this school to weld 1688/278 hy80 navesea and they don’t make it 10 year pipe welder boiler maker navy submarine welder

[@Jimmermahomoney]

Hi

[@stephenmulcahy9430]

Look Ma! Anyone can glue pipe

[@theodorebradford7450]

Thats not a pipe that's a "Tube" 😉

[@robertoflynn3168]

Cup is too big should be 8 Cup

[@tig6779]

Учи матчасть братик, пока на троечку с минусом

[@austinwilson4440]

No wonder half of tws grads cant get a job or barely hold a torch when they do pass 🤔.. lol you could buy a set of fitting clamps and tack the bottom that fit is all fucked

[@acostafrancisco713]

That is how not to put in a root

[@majstorvelja]

you'd need a ton of wires to burn...then you should record a video...maybe it will be better😉😉😉😉

[@nickbuth5204]

Too dark for most of it

[@jrpo6379]

What's with the excessive nostril breathing? And why is it always people that look like this guy that does it?

[@calebc6028]

do you rest the wire on the other bevel???

[@svarnoyizderevki]

бухой походу.

[@Thewelderlife]

That looks like dookie keep practicing