How To: Whirlpool/KitchenAid/Maytag Door Gasket 2159075

[@aimebernards102]

THANK YOU! My 15 year old son and I struggled to put the new seal on and your tip about using the tool saved the day!!

[@JohnyG14]

I don't care if you don't really need to take the door off... I just watched a 10 minute refrigerator repair video without skipping... and I dont even need to replace my gasket. This man is pure how-to video magic. The hair, the cadence, the the confidence oozing out his big brass nuts must be respected. Game recognize game, sir.

[@appliancepartspros]

Glad the video helped you out!

[@yorickhunt3371]

+John Gallagher Yeah, it's about time Ron Jeremy's younger brother got some recognition.

[@alexcisotto3007]

That's a good one, dude! Ron Jeremy's younger brother...HA HA HA! :)

[@inlovewithi]

It was very informative.

[@johnstrong7653]

@@yorickhunt3371, no no, he's the Bob Ross of Refrigerator Repair.

[@MichaelRAtwood]

Thanks for this demonstration. My daughter and I started at and finished in 37 minutes after watching this video. It's easier with two people for sure I would be like most guys and be a little upset as you need another person if you have never done this before. I also fixed my broken icemaker after watching your video. Thanks as this saved me a lot of money for a repairman! Now I'm off to fix my rental property gasket.

[@rsmythe9617]

Excellent video that covers everything you need to be aware of. I followed it exactly and got the new gasket on and working perfectly. However, for my unit I did have significant difficulty getting all four corners in place. There were plastic trim sections on the top and bottom of the door that got in the way and only one could be removed. Also I needed to stretch the gasket to get it around the corner edges which also needed to be pried up with a small screwdriver to get the gasket edge underneath. But I got it done! Thanks for the most excellent instruction to us DYIers.

[@dikelediandronicamosito4976]

I'm staying in Johannesburg where can I buy fridge gasket in Joburg

[@BippyGrace]

Thanks so much for this video! I changed out the gasket on my freezer and everything was exactly as shown, and now it works perfectly. Instead of having to spend a grand + on a new fridge, it was less than a hundred dollars to get the new gasket to keep her going for another couple of years. The seal is perfect- even better than on the not-damaged fridge side! The whole operation took me and my kid half an hour.

[@appliancepartspros]

+Bippy Grace Awesome, glad the video helped you get the gasket changed!

[@freyaterrastar474]

Thank you for the clear and to the point instructions. You have saved me a mint in hiring a repairman.

[@kingkoopur9212]

Is the mint for the repairman's bad breath 😂

[@briano295]

THANK YOU! The tips about starting in the corners is a life safer. I've done a few of these now and never thought to do it that way. This is much easier!

[@appliancepartspros]

You're welcome! Glad we could help.

[@huskerbirdman44]

There were some good tips in this video. Using a nut driver handle to push in the gasket worked well. This could be done with the door attached. My KitchenAid has a wide groove for the gasket to fit into, making it even easier.

[@patribtr]

I did it with your easy to follow instructions. You are heaven sent!!!

[@appliancepartspros]

We are so glad you were able to get your appliance fixed!

[@solomonoh]

I just did this with the gasket that does not have the metal lip, but one that came from a used unit. The ridge that embeds into the channel in the door requires that you have a plastic pry tool to lever the gasket under the door lip. I had one for other purposes, bought from Amazon, which is about half an inch wide with shallow steps along the pry side, and blue in color. It came in a multi-pack of pry shapes. This tool lets you more easily slip the ridge into the door channel. I did it with the door attached and it took about 45 minutes. It will require a lot of finger and forearm effort. The key with this type of gasket is to get a part of it near (but not on the corner) embedded first, because it’s impossible to force the corner in otherwise. The metal lip gasket is most likely designed for replacement purpose, as you won’t be fighting to squeeze the gasket in, but rather simply pushing straight without prying as the video shows.

[@buckbrown823]

Thank you! This is one of those things that you think you should know but; an expert showing how it's done is far more reassuring.

[@patkruhm8038]

Watched many many videos but this one got the job done! Thank you!!

[@eck968]

Easy to follow tutorial. Probably took about half hour. Yes; I took the door off. When you’re older; it just makes more sense. Now I need to adjust my door height.

[@appliancepartspros]

Glad we could help!

[@joeporcello]

Glad I found this video before removing my old gasket. New Gasket W10407212 for my Whirlpool french style refrigerator door is very similar to this one. If I would have just tried to pry off my old gasket as I saw in another video, it would have destroyed my inside door panel. All is well after watching this video and taking about 40 minutes to install.

[@AlexMiller101]

Worked great, good instructions! This was a lot easier than I thought it'd be. Door closes like a friggin' vault!

[@appliancepartspros]

+Alex Miller Awesome, glad the video helped you get the gasket changed!

[@doggiesarefriends723]

So clear and to the point, love it. Main reason I'm buying it from you guys.

[@jawaad7405]

truly my refrigerator door gasket needs a change, and I shall follow your steps . Thanks for explanation

[@rosssmith4179]

Taking the door off - easy. Taking off the old liner - easy. Fitting the new gasket around the corners - an hour and a half of fits and starts, with lots of cussing along the way. By the time I finally got them fitted, two of the corner seams had split. These Whirlpool/Kenmore gaskets no longer ship with a rigid fitting to go under the lip - it's all soft gasket material and tears very easily. My suggestion - you can do all the work of taking things apart, but hire a pro to fit the new gasket. If it tears, it's on his dime.

[@jrbutterfly31]

ok an hour later, after much howling into an empty kitchen... bike tire levers sort of worked out ok. they're designed for getting the bead of a bike tire seated in the rim, and they're rounded so that they don't gouge the tire, so they were perfect for this. also it helped to loosen the screws holding the inner door panel, just a turn or two, so the edge of the channel was easier to lift, and then tightening them again once done with a section.

[@Crockettman82]

I was wondering what I was going to have to end up doing with the gasket I got shipped to me. It is all creased and whatnot, and I was thinking I might have to send it back! Thanks for the tip on heating it up a little bit.

[@appliancepartspros]

David Wokojance The manufacturers do not always ship them in the best boxes. Lay it out in the sun or in some hot water before trying to install.

[@Crockettman82]

The one box was so tore up, the shipping invoice fell out of the box! A huge hole on the side! I ordered one for the fridge, and one for the freezer. Unfortunately the fridge is the wrong size, so I have to send it back to Sears... It's not as bad as the freezer though, so I'm not too worried about it.

[@bobpierce7443]

Incredibly helpful. The only difference I experienced that I felt may be helpful for someone else is that I lined up the corners precisely, but had to insert the black flap and inch or two down the line and come back towards the corner with the small round push rod to get them to go in. I feel like Tom Hanks in Castaway... "I have made fire!" Thanks APP

[@redkulaT]

WIIIIIIILSOOOOOOON

[@livitcallentine4339]

I have a side by side and and I'm not planning to remove the narrower freezer door in order to replace the gasket. Am I looking for trouble by not removing the door?

[@hassanjassoma5809]

A good explanation sounds like an excellent engineer.

[@petermontesdepastoriza5879]

Thank you very much! Before I saw this video, I was with the impresion that it was needed to remove the entire inside panel to reemplace this kind of gasket.

[@tasmedic]

Thanks guys. This saved me a LOT of money.

[@reinhardschmidt2879]

Great explanation and very helpful ! Thanks 👍👍👍👍

[@jasonhalil2591]

Not all these type seals have the hard plastic lip and they are a real difficult thing to get back into the door liner. I did mine without removing the door and man that bottom section made me crazy!!. I’d certainly recommend taking the door off for sure with this type of seal. Used a hairdryer to soften the seal once it was on for a perfect seal.

[@appliancepartspros]

Glad you were able to complete your repair. If there is anything we can help you with in the future please let us know.

[@jasonhalil2591]

@@appliancepartspros Thank you very much for the guide, it was the only video guide I could find that dealt with this type of seal - all the other push in type seals look a heck of a lot easier than this type. Many thanks for the tips, helped me out here.

[@fishhed8304]

Sweet!!! Thanks for the video!!! We got our gasket installed, the total time was 15 minutes!!!!

[@appliancepartspros]

Fish Hed Good job on getting the gasket installed!

[@AngelofH08]

Thank you for this wonderful informed video. Hopefully this fixes our problem.

[@rk59802]

Just replaced my fan because the original one was noisy. I may have pushed the fan on the motor too far because the shaft protrudes through the fan blades. Everything seems to work, but is this a problem?

[@gildardomunozvelez9274]

Excelente felicidades Vea cómo se quita todo el panel para cambiar la manguera que alimenta el dispensador de agua

[@at-wy2ib]

Здорово! 👍Thank! Буду пробовать!😁 Надеюсь получится. Только у меня холодильник Stinol. Интересно, такой же алгоритм 🤔

[@BossaNossa1]

Thought, before replacing the new rubber seal would it be good or bad to add a small amount of some kind of grease/lube to help it go in..? Or would that just help it pop out later..? Thanks!

[@racketrick]

Looks like the more rigid leading edge takes care of that problem...at least he makes it LOOK that way!!!

[@rahuldeol9326]

Thanks a lot,m this video gave me confidence, Respect from australia.

[@appliancepartspros]

You're welcome! Glad we could help.

[@HansSchulze]

there are a couple of edit issues 9:50 freezer door (chop) and one earlier. Thanks for the video!

[@steveo363]

I had to look because of your reply - the fridge was not leveled properly with the feet adjusters so it was wobbly.

[@wilfridoa]

It is very helpful, easy, uncomplicated, thanks for this video.

[@appliancepartspros]

Wilfrido Contreras Glad you were able to get the gasket changed!

[@stel1000]

Amazing job Ron! Great video with very clear instructions! You could be a teacher too.

[@nathanielraymond4808]

thanks a lot for the advice . the steps in the videos are easy to follow.

[@appliancepartspros]

Glad the video helped you out!

[@mij9520]

If the part attached to the fridge where the gasket touches is rusted, is there a hack to replace this or temporarily do something until I can afford another fridge? Is rusted only at the very bottom, causing a tiny air to enter

[@dikelediandronicamosito4976]

Where can I buy a new fridge gasket

[@31victorjavier]

Hi I install the new gasket. The door dont close hard like before. The top is outside half inch in comparation with the other door. I put a petroleun Jelly around the gasket a left all night. What I can do wrong...?

[@GHC_II]

Just saved me $275 by not having the repair man to come to my house. MY GUY!!!!!

[@pottersri]

Excellant video. Is the repair very similar with most refrigerator brands?

[@appliancepartspros]

A lot of the newer ones use gaskets that just push into a channel. Not exactly the same, but same principle.

[@sohelranajcd7728]

good

[@sohelranajcd7728]

good

[@LaurelDenver]

Removing a refrigerator door does make it easier, but it is certainly possible to remove and replace with the door on. When I replace the gaskets, I seldom if ever remove the door--it doubles my labor. Especially on higher end brands like Sub Zero, Lebherr, Monogram, etc.

[@ארנסטקליין]

ךפ

[@GovernorNC]

I'm now ready to install and have the information to be successful. Good video.

[@appliancepartspros]

Glad the video helped you out!

[@anthonyviviano6395]

AppliancePartsPros need to by gaskets for a two door whirlpool upper door is Rick freezer lower doors refrigerator model number is ET 14JKXMNR for serial number is S53834727 would like price Whirlpool

[@paulette6900]

I just got a door gasket, but it doesn't have that hard edge you push under. I'm worried if I take the old gasket off, I won't be able to get this new gasket under that space it needs to go.

[@appliancepartspros]

If the part number you ordered is the correct one for your model then it should work for your unit.

[@alierdal5867]

Çok teşekkür ediyorum çok güzel anlatıyor sun eline sağlık

[@romank5912]

To make your new gasket smooth after taking it out of delivey box, use a hair drayer. It does the job within minutes.

[@СветланаБогдан-э9э]

Да

[@mikepayne1851]

Great job I so appreciate this bid I feel confident I can do this myself after watching you. Step by step was awsome

[@copedennis1]

My old gasket leaking between gasket and door instead of between gasket and refrigerator. Still need gasket?

[@roodyalmasry]

شكرا عزيزى لقد استفدت كثيرا من هذا الشرح المفصل

[@appliancepartspros]

roody almasry Glad the video helped you get the refrigerator fixed!

[@hollandhomes8927]

Why does a side by side Kenmore refrigerator cools only half way in the freezer?

[@bobgillingham5571]

Excellent patient video. You have helped me a lot. Now to order!

[@appliancepartspros]

Glad the video helped you get the door gasket changed!

[@rosemaryknight1273]

I need to find white gaskets for my Kenmore French door fridge. Do you know where I can find them.?

[@saulvera5469]

Does IT seals back quickly?

[@shankargopalkrishna]

Our Refrigerator Whirlpool ice magic door Gasket to replace where can v get please in bangalore

[@joshhillesheim8333]

Would this cause the door not to close?

[@fieq123]

thank you so much for the learning me how to do it

[@yartao2849]

The refrigerator door gasket was made by our machine,I feel very happy!!

[@appliancepartspros]

Yar Tao Awesome, glad you got the gasket changed out!

[@SEASCAT]

Looks simple enough. I have a small upright freezer and it was only like 2 weeks ago that I defrosted it.... then last night I couldn't even get the door to shut because of the ice. The gasket is crimped bad and when I tried to look at it, came apart in my hand. That has to be it, right?? Hope so. I have ice chest full and need to get them back in the freezer, so I'm going to try and do this today. I'm an old lady, who never had kids- looking for a handy young man to adopt!

[@haleiwahi27]

Great video. It sure makes it easy when people who have done this before take time to video your work and show it to the rest of us backyard mechanics. I'd hate to pay a person to do something only to find out it was a real easy job. BTW, I noticed in the last half of the video you chose not to use gloves. Why'd you use them in the beginning of the video? I hate wearing gloves in any type of repairs. Hard to use gloves and tools same time.

[@appliancepartspros]

Todd White I usually always wear the gloves, they are pretty thin. Occasionally I cannot get the feedback through them and I take them off, in this case I could not tell if the gasket was going in between the door and the door liner.

[@Romidear]

Besides I can't believe how expensive is the gasket, when I bought my refrigerator it cost 500 dollars and one gasket replacement cost 71 dollars, is almost the fifth part of the cost...

[@omarsantamaria6871]

awesome thank you I saved several bucs with this video and your tips ....

[@1960oiram]

Thank you very much for your video. Nice, well explained steps. Do you know were I can get gasket for my frigidaire refrigerator?

[@martinoamello3017]

Appliance parts store near you or online from several retailers..

[@bernardosax54]

Thanks for that repair video it was very helpful 👍

[@Amzeeel]

I almost bought a new refrigirator for $1500, how stupid am I, thanks a lot bro, I will try that!

[@appliancepartspros]

You're welcome!

[@bonnieallen3336]

I have a kenmore professional refrigerator and the handle snapped in two how do I replace it

[@appliancepartspros]

We'd be happy to help you find the correct handle for your refrigerator. If we have a video for it, we can link to it, or we can talk you through the repair. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We’re here to help 7 days a week.

[@mserrato587]

My refrigerator is new, and is not closing on the upper right corner and the bottom right corner, should I change the gasket? Thank you

[@appliancepartspros]

It could be the gasket, or it could be something like the hinges. We'd be happy to help you figure it out, but we'll need some additional information about the model and the problem. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We will need the model number for the appliance, so that we can look up diagrams and information about your specific unit to give you accurate advice.You can look here on our website to help you find the model number: www.appliancepartspros.com/modelnumber_locator.aspx

[@account-not-found-try-again]

Just start at opposite corners and youll figure out the rest yourself. I used my thumbs to push it in. Done. Thx for the vid. Dont forget to like and subscribe!

[@appliancepartspros]

Glad we could help!

[@ragnarlothbrok4029]

sir can i question all door if same btu rubber seal is all the same like here in philippines samsung panasonic etc. how to buy tha in the supplier what can i say to supplier..please advise

[@appliancepartspros]

All the seals are definitely not the same, particularly between manufacturers. You will need the correct part for your model of appliance. Unfortunately, we do not currently ship to the Philippines. However, the most reliable way of finding the correct part for your appliance is by searching using the model number. Once you know that, you should be able to look up the correct part for your appliance, then locate it either online or at a local parts retailer.

[@karenalhakim1038]

Do you have gaskets for boat refrigerators?

[@appliancepartspros]

Karen Alhakim If it is one of the specialized boat brands we do not. If it is one of the brands we list on our site then as long as you have a model number we can look it up and see.

[@rbrani8466]

Very very nice 👌 good video 👍

[@bhaveshrana999]

how i purchase new gasket give information about its price also and buying place

[@appliancepartspros]

You can purchase this gasket here: www.appliancepartspros.com/whirlpool-refrigerator-door-gasket-2159075-ap3083603.html

[@opojha6953]

Please help me how to control cooling of my Whirlpool refrigerator Ice Box? Thermostat controller is not responding Even after putting it at 0 also it is full of Ice... rest ref. is not that much cool . Please help us. We shifted recently our fridge by Truk after that only this problem started cumming before this It was working properly. Please suggest whet to do?

[@appliancepartspros]

If the refrigerator was moved on its side, that may be your problem. We'd be happy to help you diagnose your appliance, however. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We offer free technical advice. We also have a free repair forum where the techs can help you troubleshoot the problem: forum.appliancepartspros.com/. We’re here to help 7 days a week.

[@colinmata7673]

My refrigerator gasket has come away from frig causing air gaps. I was told to use hair dryer to soften gasket push it in place and close for at least an hour. I have done this when gasket is cold it contracts and pulls away from refrigrtator and cold air escapes. I have had sears out twice for same problem. It doesnt want to stay close to refrigerator. what do I do?

[@appliancepartspros]

It may be necessary to replace the gasket, then.

[@bernarditagonzales6921]

AppliancePartsPros u

[@janicepeters5535]

I was able to follow the directions very easily. Left my power on though. Now door will Not seal( too easy to open)??? Help?

[@appliancepartspros]

If you need additional help with the repair outside of what's demonstrated in the video, you can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We’re here to help 7 days a week. and we'll help you figure out what went wrong!

[@michaeljuarez4027]

Janice where you able to get help because I’m having the same problem you are describing.

[@moshe2495]

Why don't they make permanent gaskets on the refrigerator? Makes sense.

[@nilomagdalaga3579]

Where to buy door gasket?

[@appliancepartspros]

What is the model number of your appliance?

[@yhnocosio4344]

COMO SE LLAMA EL PEGAMENTO PARA EL JEBE

[@steveramer7646]

"Like"? That's all I can do is "like" this video? Where's the "Love it!" button? If there's anything my wife will tell you in not, it's handy. I watched this video and got the job done in probably less than an hour after collecting some appropriate tools. Granted, I didn't cut the power (oops), but I'm sensible enough to know when it's really necessary. Also, we needed the freezer to be working...dang thing is packed. By the way, a sharp metal cookie spatula works just fine in place of a putty knife if you don't have one handy. :)

[@appliancepartspros]

Steve Ramer Awesome, glad you were able to get the new gasket installed!

[@user-brodjga486]

Офигеть мастер! Взял рабочий хладос с нормальной резиной и заменил хорошую резинку на ...... тоже хорошую! :))))

[@manintoynenam]

Why some gasket dnt have magnetic strips

[@apace003]

Remove the top half of the gasket with the door in place, Install the top half of the new gasket. Once in place remove the bottom half of the old gasket. Finish installing the bottom half of the new gasket. No need to remove the door.

[@appliancepartspros]

Thanks for that tip.

[@johnthomsen2126]

If I click the link in the lower corner I got a new page with access denied! Is this because im in Europe?

[@appliancepartspros]

It could be that our security has blocked your area.

[@tw4987]

It took over an hr. to do, a lot of adjusting, he didn't show how to soak in hot water...after i finished, I was told by a tech that if I used a blow dryer on the new gasket, it would hav worked too, then instal it...

[@sethc6663]

I'd suggest checking the new door seal for size/fit before removing the door, very frustrating to remove the door only to find out you have the wrong door seal !

[@appliancepartspros]

Seth C Good tip, glad the video helped you get the gasket changed!

[@blacksebastian2]

AppliancePartsPros i need to change my refrigerators gasket. Its an electrolux. Can you tell me if they use the same system ? Tnx in avance.

[@appliancepartspros]

John van beek You can go to our website and enter your appliance model number to view the parts breakdown for the fridge. All the manufacturers have mounted them differently over the years. Here is a Frigidaire one that is similar: www.appliancepartspros.com/frigidaire-refrigerator-door-gasket-241872513-ap4374868.html

[@gael.g8685]

excelente vídeo de como reparar el sello .

[@appliancepartspros]

Gracias.

[@roylafray723]

This deminstration is in fact outdated. There is a fourth screw to remove to get the hinge cap off. Look from directly on top of the cap. It's small and difficult to see unless your looking directly down from above. if you don't and try to pry it off you will break the plastiic cover. Secondly the removal of the old gasket is easy. The new gasket install is a S.O.B.... and impossible if you've never done it before. My advice, call a service man and watch and learn for the next time it may happen. After a couple hours of frustation I taped the gasket on and will call the service people tomorrow. The video made it look so easy. The ten minute change is a pipe dream. Don't do it.

[@josediaz-gg7gp]

I chance my gasket I'm refrigerator but it doesn't want to close can someone tell me what's wrong I did everything that I saw on the video?

[@appliancepartspros]

It's hard to say exactly what's wrong without more details. How is it not closing? If you need additional help with the repair outside of what's demonstrated in the video, you can always give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We’re here to help 7 days a week.

[@moderate7958]

Thanks. Good instructive video.

[@appliancepartspros]

You're welcome!

[@geneballay9590]

Great video. Thank you for posting

[@appliancepartspros]

You're welcome!

[@martinoamello3017]

Quite by accident I found this video and we have this exact fridge.. What are the odds? Anyways..It might just help to do a few things first.. Turn water (and power) off if turned on and also remove door handles if laying flat. It's just 4 little screws..

[@zaedlo]

How does a door gasket from a $500 fridge freezer cost $230 ?

[@yitzkopel1841]

Thanks. This was super helpful.

[@appliancepartspros]

Glad the video helped you out!

[@dhflannagan1]

Well done video! Thanks

[@sandstorm60603]

You DO NOT need to REMOVE the DOOR from the refrigerator OR the freezer to REPLACE the GASKET - this is WAY MORE WORK than necessary!!! Why do "Pros" always do things the HARD way!?

[@donbeach9331]

Laura Sands a

[@carlosalbertolinares1242]

You are right dear Laura.

[@Abena_Goddess87]

So you can call them.

[@fasin8me1]

So they can charge u more

[@rblevins97321]

They get paid by the hour, that's why!

[@laugh82lee]

Excellent video. When I try to order the part for my refridgerator, it say the part is discontinued, What can I do now?

[@appliancepartspros]

Give us a call with the appliance model number and we can see if there are any options: 1-877-477-7278.

[@redpedro83]

Great Movie. Thanks for sharing.

[@texasclass]

Can't you leave the door on?

[@janehenry3101]

Thanks. Easy to understand!!

[@appliancepartspros]

Jane Henry Glad the video helped you get the gasket changed!

[@superjoint57]

I just took off the old gasket and replaced it with a new gasket in literally 5 minutes!!! There is NO need at all to remove the door!!! That would have wasted time & energy!

[@Reng-nw6nz]

How do I replace bottom gasket without removing the door？Cause it's really nearby floor.Is that more convient to replace the refrigerator if I lie it down on floor?

[@donpixote3321]

yeah no need to remove door LOL.What a waste of time.

[@zedcartwright5267]

DPT- Of course taking the door off is optional. But I wouldn't say it is much wasted energy as there are only three bolts to be removed from the top and the bottom is just lifted off its holding peg. It is a lot easier to install the seal on a bench than having to lay down on the floor to install the bottom of the seal. I guess if you used a GPS to find an address they may give you instructions to take the interstate whereas Hwy 90 may get you to the same destination just a different route. Same thing here.

[@donpixote3321]

@@zedcartwright5267 LOL what a nonsensical bit of gibberish. It's having to empty everything out of the door as well as removing the bolts and then removing and reinstalling it vs getting down low and simply installing the new seal which is not that hard. Some people just like to do things the hard way.

[@MelodyInTheChaos]

Thank you. I was wondering what the point was to take the door off. No way I'm doing that lol.

[@neildc1654]

Thanks for the tutorial. Question though is could my fridge be just not level and full of condiments on the tray thats why when we shut it it doesnt seal all the time or bounces back a bit leaving a small gap and we have press on the door to shut it or close it gently? Thanks again

[@wichitazeb]

I've got the same issue and I'm leaning towards the theory that my seal is just getting old and worn out. The extra weight of the items in the door and the fact that it gets used more that the freezer door is why I'm thinking that this seal might be failing sooner than the freezer door......I'm not an expert though and it's just a theory. I'm thinking about replacing my seal.

[@neildc1654]

I checked it today and you could be right. The magnet doesnt stick quite as good as my other fridge so Im geting me a new seal from APP, hope that solves the problem. Thanks for your reply

[@neildc1654]

This dude is trying to sell us something expensive. Heres the part number we need Part Number: AP4247867 . I found it here on youtube why the door is not shutting properly.

[@LouieLouie3]

Mine did the same thing and found out it was the door cams. They were shot. I replaced them and the door closes on its own now.

[@skeleman1963]

great "How To" video!!!

[@appliancepartspros]

skeleman1963 Glad the video helped you get the door gasket changed!