How To: Whirlpool/KitchenAid/Maytag Water Inlet Valve Assembly WPW10432353

How To Replace: Whirlpool/KitchenAid/Maytag Water Inlet Valve Assembly WPW10432353 www.appliancepartspros.com/wh...
Symptoms: one or more of the solenoids have failed and it's not filling, body is cracked and water is leaking on the floor, one or more of the parts have failed and you'd rather change out the whole assembly instead of the individual parts.
Tools: towel, pliers, 1/4" nut driver, putty knife, razor blade, zip tie, wire cutter.
This Whirlpool/KitchenAid/Maytag made Washer Water Inlet Valve Assembly replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, and Kenmore Washers: W10432353,W10334612, W10337065, W10357184, B008DJMFJY, B008DJL37E, B00LQDG7IE, B008DJO402.
Buy the new Washer Water Inlet Valve Assembly WPW10432353 here: www.appliancepartspros.com/wh...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros

[@raulacbo4469]

This video is SO helpful! Now we know what to check out--and how to do it. we appreciate.

[@Boliodog1990]

Great video. Concise no chatter

[@tonyrivas7184]

i see ebay sells a few of these valves PREOWNED… i believe they are guarantee….ussually this valves stops operatening on the cold water , so if u need to use it while replaceable valve arrives …..i use the hot water so that side of the valve usually works….good luck

[@thomastillson5742]

What are those pliers you used to remove the hoses?

[@douglascarlson9006]

Thx to your VIDEO here, I'm close to completing the replacement of my defective water inlet valve (WIV) on my old Mytag ... I just need a few more tips please ... I've just replaced the old WIV with the new one ... BTW, my unit looks to be virtually identical to the washer here in your video ... here's the big question ... Does it matter which of the wires are attached to the celluloid prongs? One has a white plastic casing and the other is red ... does it matter which prong the red one is attached to? Also, just as shown here in your video, there are also two smaller wires that must be re-attached to prongs on the neck of the WIV ... does it matter here also? Is there a way to re-attach the wires incorrectly? ... if so, could I damage the machine? Your thoughts please, thx much, Doug

[@dalegoers7618]

My washer is not made this way It is a newer washer. Seems like they change every 6 months. Why not a book on how to service with every new machine.