How To Win 190MPH Car!

Get Tickets Here: raffall.com/ra...
This is a brand new complete custom made 1/7 Scale monster!
We only took it out to the runway once to make sure it performs as promised.
Building this car is around $3,000.00 in parts and 40 hours of labor.
EVERYTHING is built to be bulletproof while being 7075 aluminum and carbon fiber.
Perfect Pass Carbon Fiber GT Chassis.
Perfect Pass 7075 Aluminum Arms.
Perfect Pass Full Carbon Fiber Kit all around.
Perfect Pass Ultimate Carbon Fiber Titanium drive shaft system with titanium spool.
Perfect Pass Carbon Fiber Batwing.
Perfect Pass Extended Aluminum Body Mounts.
Perfect Pass Speed Run Springs Set.
Perfect Pass Launch Control.
Perfect Pass Aluminum Splitter.
Perfect Pass QS8-V2 Connector.
Saga Gears
Delta Plastik FC100 Body For Best Aerodynamic.
Castle Creations 2028 1700KV (sensored Motor for smooth operation).
ESC: Castle Creations Mamba XLX2.
Futaba R2006GS Receiver For Better Reception.
Futaba GYC441 Gyro For Better Handling (you will use your remote).
Perfect Pass Monster Servo For Super Smooth And Quick Steering.
Brand New Set Of BSR TEAL Wheels (The New Speed Run Compound)
Vitavon 7075 Aluminum Hubs And knuckles
Vitavon 7075 Aluminum Bulkheads Front And Rear.
Vitavon 7075 Aluminum Differentials 200K rear/500K Front For Perfect Handling.
Arrma GP5 42/15 Differential Gears.
GPM (7075 Aluminum) Adjustable Front Steering Tie Rod.
GPM (7075 Aluminum) Rear Camber Links.
GPM (7075 Aluminum) Rear Diffuser Supports
GPM (7075 Aluminum) Front Bumper Mount
GPM (7075 Aluminum) Front Upper Suspension Mount
GPM (7075 Aluminum) Lower Suspension Mounts
I will ship worldwide for free but the winner has to pay if there is any import duty fee.
(You will tell me what amount to put in shipping docs)
Winner will be notified by email.
You gotta be in it to win it!! Good luck!!
Raz Shifrin.

[@sheiladavis2304]

Raz was that a shot of Heather Brooke in the beginning?! 😅😂 well played sir! Gotta give props where they are due.

[@justonjacoby4455]

Raz Shifrin build video & Kevin Talbot video all in the same day??!! WOW FIRST TIME in the same day!! AWESOME build and giveaway!!!

[@sheiladavis2304]

It's not a giveaway. Kev makes roughly anywhere from 10k-15k or more off of every raffle. If I was him I would actually do a giveaway just as a way to give back to the fans. Especially since moving to the isle of man he doesn't pay income tax anymore. He doubled his income over night. But thats just my opinion and if I were in his shoes, its something I would do.

[@justonjacoby4455]

@sheiladavis2304 you still pay a fee for tickets to win not much but you do I enter them

[@endosrc]

not really. lot of people are subbed to both and sadly, people are gonna be drawn to kev over raz

[@rickroberts7611]

That KT video was made months ago lol..Giveaway is a giveaway..Id like to see him give one away..Nobody would give anything away without nothing in return

[@BradCassidy-l2q]

@@rickroberts7611 I've entered all 3 or 4 of tomleys Free giveaways. he's the only one that I've seen do that. he also gives to charity from a lot of his raffles. I can't afford the paid ones

[@davidswartz5307]

HELLO Mr. Raz.....I just popped in to say that that is one BEAUTIFUL car....Thank you for sharing your build with us and for the chance to win the car.....I wish all the speed runners good luck in the raffle and am standing by for the next video....Thanks again Raz...A friend from Florida.

[@EJ-74]

Woke up to new Raz and Kev videos, you know it’s going to be a great day 😁

[@mikeinvegas1]

Thank u Raz great to finally see a Raz video. Always the best most creative videos. Very Informative. ❤

[@chrislang7460]

YAY. King Razzy is here. Finally some quality rc content again!!!

[@alankowalski8781]

I loved the whole video Raz. Especially all the setting up and tuning. Never even thought about half of this stuff, but I am more into bashing. I learned a lot, thank you.

[@Bulldawg101st]

The stop motion was much cooler than Kevin Talbot!!!

[@MSDModelismo]

Man, the quality of the parts and assembly... simply perfect. Good to see you posting new videos Raz.

[@SpeedSyko]

Raz is a Hero!!! How many people can do what he does! Hes the king of speed runs and ingenuity. The brilliant mind and the mind of a child is why he’s such a wonderful guy! Love you brother never stop giving us something to Strive for! You’re amazing my good friend!!!🙏👊🍻🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆

[@trife74]

The best movie I’ve seen in months 😂!! Thanks Raz great video … going to copy and paste..🤙🏽

[@quietrc]

I have no idea what Temu-Denise-Richards was doing in the middle of this video, but I appreciated it!

[@Nihat_ONAY]

Hi Raz. i like your diff oil fill technique.👍

[@SpeedSyko]

Wow! This needs to be named “perfect suspension set up!” I learned so much from this!!! I’m beside myself!! 🙏👊🍻

[@rclife3231]

Bad ass car man 😮

[@audiquattrojamie]

Great to see you back Raz, looking forward to more epic content 👌🏻 Love the humour! 😂

[@2424gold]

Hmm, cant find the "perfect pass soldering station" on your website.

[@RazShifrin]

Soon:))

[@steveblackbird]

Said it before Raz, and I'll say it again. Your cars are meticulous works of art. The fact it's capable of 180+mph is a bonus. Beautiful work.

[@VinydFPV]

Awesome video my friend!!! Super fast 1 motor car... I kinda don't see why people create a car with 4 motors? 2 at best. Do you really need 3 more motors to go like 230-40 mph?? I guess that's why I stick to building monster trucks way less technical. Leave it to the pros I guess? I do build and fly fpv freestyle drones which is very technical as far as tuning the quadcopter on betaflight. Any who love the video as always my friend...

[@Kaykash8100]

RAZ ur videos are the best ... They are so informative and help with the most intricate details of running a top quality car.. a Always start out intending to watch just a fraction of the video but end up watching the full thing.. 👌👌👍😎😁😀🔥🔥👏👏!!

[@chancelbrown4526]

I love your products, but I live in the midwest Chicago IL, and I can't get them on your website because they are always sold out. How can I get them cause I do try and promote your products to new speedrun new comers but everything is always sold out ????????

[@RazShifrin]

My apologies what are you looking for?

[@chancelbrown4526]

@@RazShifrin arrma carbon fiber chassis, The arrma aluminum arms Aluminum front splitter Pps motor mount combo

[@rcfamily4life74]

It looks like rubberized asphalt. It's very quiet compared to traditional asphalt. Another amazing build. Happy RC'ing Y'all!!!

[@a2bdazsrc998]

Hi Raz, should start making parts for RC drag racing guys. Those cash days are getting competitive!!!!

[@DadsRCGaragePNW]

You and kev have inspired me and my daughter. We went and got ourselves a limitless kit. Now the fun begins. Just have to source all the parts and then get to the spots to run it. What’s the world record for a 10yr old?? lol she could do it!!

[@carlosrubio7455]

Hola quiero poner XL 2 y 1721 mamba a mí coche. Qué relación piñón y corona me recomiendas?? Motor tiene 1250kv .

[@BuiltbyBrendon]

Another amazing video raz, I've been missing having regular updates from your channel.

[@coygtrc]

What an awesome build and car 🤩 Seeing at 180 with the dirt looked like the real speed car world record on the salt lake 😮 👍🤝

[@RcpsychoRen]

i hope the best !

[@Dickson219]

I can’t wait for you to get stuff back in stock so I can finish my build! Watching this video just made me even more impatient lol

[@bertramkettles8167]

What spur and pinion

[@meirdeaph]

Wow absolutely stunning build!❤

[@xch3no2]

Improve your soldering technique with liquid flux like Kester 951, after you use it you never go back to dry.

[@johnoneal1999]

Weird runway with a highway on 1 side & a train track on the other & both very close...

[@Sponsoredbybaz]

When new people come to this channel, they need to be told that raz is A OG with fast cars and what You are saying is a fact?

[@Dickson219]

HELP ME RAZ! Tell me how you even get these crappy XLX2 esc’s to work?! I’m building them just like you are but I sit mine on the ground and squeeze the throttle and it goes about 10 feet and cuts out! Then I get the stupid red short-long-long beep. I’ve done sent back and went through 6 different XLX2 esc and come to figure out that it’s just the esc being a piece of shit. It will run on 6s all day but soon as you put 8s on it. It goes into that excessive spike in amps/volts mode. At this point I’m ready to go back to hobbywing max5 esc which work perfectly with 0 problems no matter what you hook up to it

[@Cpt-Pugwash14]

Raz is such a perfectionist!!! the exact opposite of Kev lol >.

[@billymanilli]

It's pretty wild seeing stuff where the spur gear is smaller than the pinion! You know it means business just looking at it! Out of curiosity; anyone know why "Vitavon" stuff is SO crazy EXPENSIVE?? I have a few things made by them... imho, it really doesn't seem to be any different than the typical GPM/Integy/etc... except they're 3-5 times more money! edit: btw I just got a "raffall", so don't forget to pick me! lol

[@Sponsoredbybaz]

How did you start doing this Like affording your cars and starting your business

[@FilthUD]

You can’t say that spiel about having to use “The Best” and flash all those GPM packets lol. I saw those Vitavon packs and I was like, “Okaay… the best, for sure. Look at you.” Expecting to see Scorched, M2C, Hot Racing, Integy or Treal.. then, the camera panned to the GPM catalog hahaha. Not hating, just wasn’t expecting it lol

[@rtz549]

Nice being able to build a car from parts and not have to buy a whole car.

[@Dickson219]

Man I have done built a complete perfect pass limitless v2. Everything on it is perfect and I also have another limitless v2 still in the box that I’m piling perfect pass stuff in until I get every accessory, I want on it. But I’m just going to have to sale everything because Castle XLX2 esc’s are so shitty. I can’t get one to go 20 feet without cutting off with the short-long-long beeps. (The excessive spike in volts or whatever it is) I send it back get a new one put it back in the car and same thing. After sending in 6 XLX2’s and this last time when they was sending me a new esc I went ahead and bought a brand new castle 1721 motor and at 20 feet boom it cuts out again! They are garbage! For the hell of it I bought the man a monster x8s and that esc does just fine.. I thought it might be my Perfect Pass launch control but it can’t be because it worked on that mmx8s.

[@fiorevicidomini8220]

Awesom video, very nice build... Congrats!! With my entrylevel 1:10 on road model, so far i reach a bit more than 70 mph with a single 3S battery... I hope, with next upgrade, to achive 90 mph... Than i will move to 4S battery and 100 mph target!

[@vonmoofles6702]

Not sure WTF happened at 5:51 ...but my God, best bit of the show!

[@GoGetterRC]

First time I’ve seen someone openly showing 180mph gearing, so thank you for that Raz. You are proving yet again that you are one of the biggest assets the speed run community has 👍🏻 On the gear calculator, why did you enter 1545 instead of 1700kv?

[@jarrodhills9925]

I’m jealous of your black handled MIP tools Raz. Those things didn’t come out here in Australia. I could have bought them via the USA but with our conversion rate plus eBay tax and shipping I could buy the same set in orange 3 or 4 times 😬

[@hooligansrcadventures3729]

I’m definitely registering 🤘🏽

[@samcourtrc6767]

Good to see you back buddy hope ur well raz done the raffle bud wish me luck ❤

[@christiannasca3520]

For my understanding: That piece of hardware, which governs the delay or ramp-up time of the acceleration is intended to put down the power constantly without burn-out. Right? I am using the Flysky Noble NB4+ transmitter and it seems to have a setting for servo delay, where you can set the ramp-up time. Isn't that the same thing? And isn't it more elegant to be able to control this setting from the transmitter? Or am I confusing two different things?

[@nofreerides7033]

Got a monster servo for a basher and can’t wait to install it with the vitavon bell crank…

[@ProjectMayhemRC]

Hey raz, I have some wicked ideas for exb diffs shimming. Need something made that might change the game. I don’t know where to start though was hoping you’d help? Lmk I emailed you on the website. Never heard back

[@ruuster83]

Why not a big grub screw to grab on to the pillow ball threads when setting camber?

[@RazShifrin]

Hmm.. I like that idea! I might actually do that in the next version Thanks!!

[@ruuster83]

@RazShifrin whatever works! Thanks Raz!

[@armenvegas]

You really do have nice vids and parts... no diddy

[@johnnyhaberfield721]

Raz.Where do I get the Magical powers of self assembly Drivetrains? Lol.✌️

[@StellaproSN2]

Hey Raz I’m working on a project build which I think you might be interested in, will keep you posted somehow

[@scottbronson9738]

Beautiful work Raz! Your amazing!🏁🏁🏁

[@jgillilan]

Just watching you toss the diff together helped me realize why my TRX-4 front might be binding up!

[@marvinlawson4232]

Super Duper awesome RAZI Yes, I would like to sign up to win that car🎉🎉🎉

[@nutsnbolts4601]

Hi sir, what a beautiful car u design who ever gets that car will be set for life sick sick give away and so now I have a question. I purchased the ultimate driveshaft kit for the V1. I have the scorched chassis. For the V1. However, when I try to install the ultimate driveshaft, it’s like it’s too short or something or it’s not lineing up with the holes that are on the chassis. ?do u have any idea what’s wrong ? Here I ask u because u have the same set up the scorched chassis with the metal in the front

[@Rcprescription]

How do you charge the batteries when you solder the connectors that way?

[@joemiller5160]

I'm entered. Drawing is close to my birthday, hopefully I score:)

[@FilthUD]

Surprised you didn’t use the new K6 bellcrank assembly

[@JamesGrates]

Great vid bud I just watched it for the second time thought maybe I missed the part we’re you talked about the gearing as you mentioned in your latest live stream but no you did not talk gearing just mesh but that’s ok don’t blame you that’s something that we need to pay our dues for not get it for free thanks for what you do

[@blacksheeprc8113]

Long time no see

[@Islow350]

I bought a bunch of tickets! Hopeful to win! More excited to see you open up the shop in Florida!!

[@matrixrc28]

Hey same here that motor is very quiet in my HoBao VTE 2

[@davidnievesfeliu1194]

With the Rc8x the use of the delay is done directly on the remote and can be adjusted at different trigger points to without a separate unit and allows the use of the Futuba gyro

[@jasonwyman5096]

have max5 hobbywing esc and mottor arrma limitless rc car only $800 in aus

[@skyhawk21]

Question, for speed run setup, how should front wheel toe be setup? Also if it’s a truck setup for speed should toe be out or in and or perfect straight? Also what good bearings to use?

[@ronstoner1656]

Good to see a build video from you. Thank you for your efforts.

[@samcourtrc6767]

That runway looks amazing buddy

[@jeppe4191]

Wow what a nice car!! Wish i could have one like this!

[@74midwestreviews58]

👍👍

[@dorsettcook]

How do I get the perfect pass smart soldering station?

[@apachebone7591]

Your builds puts mine to shame.

[@fabb60]

I want it!!

[@RC4us]

so Raz you don't use bearings in the bellcrank? do you find the stock bushings work well enough? I'm doing a HUGE infraction 6s build tons of titanium Ram Jam sent me and some CF and aluminum from m2c castle sent a xlx2 and a 1717 this is my 1st real speed build i have so many questions lol as im learning as i go

[@Sponsoredbybaz]

This is a good video I loved the stop Motion.

[@JOHND_RC]

Awesome video!! Great information

[@BuiltbyBrendon]

I've entered the competition fingers crossed I win something for once.

[@The_RC_Family]

Giveaway is a little missleading if it's in a RAFFALL Raz. It should say Win a $3,000.00 190MPH RC Car unless you are "giving it away" Not trying to cast shade mate I like your stuff, maybe it's a language thing. I know it say raffle in the thumbnail but most people will only see the title.

[@RazShifrin]

I agree I changed it. Thank you for the input.:)

[@RoniMeller]

Melech 🎉

[@CK-jk9vd]

Hi Raz, mal wieder ein tolles Video von dir. Danke. Du bist einfach ein richtiger Spezialist geworden,du hast dich sehr Hart mit diesem Thema beschäftigt und hast dir was großes Aufgebaut. Respekt 🎉🎉🎉🎉 Was ich immer nur Schade finde das man soviel Zeit in ein Auto steckt und auf einmal platzt ein Reifen und die ganze Zeit Arbeitszeit für das Auto ist verloren+das Geld für das Auto. Kannst du vielleicht such neue SpeedRun Reifen entwerfen?????😊😊😊😊 Ganz Ganz viele Grüße aus Deutschland/ Uetersen Christian K.

[@jasonwestevans7292]

Long awated vid thankeyou

[@jh6880]

You mentioned ”not even overcharging. You had 4.35v first pass. So what is overcharging then?

[@jh6880]

@razshifriin awesome !

[@wildgoobsid5]

When is someone going to put this much research and manufacturing into tires and wheels that go way beyond the current technology?

[@sheiladavis2304]

I have been working on wheels that I think will change the industry and be new world record holders. Trying to get Kev to put them on the sausage.

[@wildgoobsid5]

Yes. Having grown up following Craig Breedlove and the rest of the record holders it always seemed the wheels got the most attention. The RC world seems to have forgotten how important the wheels and tires are.

[@jasonwyman5096]

rebuilding rc cars its so therapeutic

[@jasonwyman5096]

the wheels me and people will make the best shoes

[@richbon9904]

What brand and model is your radio gear

[@tankerboysabot]

Before you started doing the mesh part I was thinking "why don't they make it how dirt bikes or bicycles are done with a screw tension" and then you showed exactly what I was thinking. So cool the RC world has come to that.

[@carlosrubio7455]

Hola quiero poner XL 2 y 1721 mamba a mí coche. Qué relación piñón y corona me recomiendas?? Motor tiene 1250kv . Gracias

[@paintendaveextremecollisio8057]

Awesome Raz great video 👍

[@jasonwyman5096]

double 2 pionion and spur gears

[@reho6760]

Shagadelic

[@LeeShawFPV]

Very cool 😎

[@todd5060]

I’m sorry.. was that shake or shave? The stop motion was on pointp

[@todd5060]

@razshifriin say huh?

[@chrissmith5148]

Do you grease the shims?

[@SuperGregRC]

Tickets bought😛

[@SpeedrunTnRC]

I almost shortened my esc wires but didn’t because I watched the video …. Entered to win! Fingers crossed

[@SpeedrunTnRC]

@razshifriin this is a scam!

[@SpeedrunTnRC]

Fake account not the draw

[@jasonwyman5096]

down force big wings

[@jasonwyman5096]

ad weight to the shell