How To Wind A Bobbin On A JACK Industrial Straight Stitch Sewing Machine

[@sfletcher471]

Very happy to find your videos using Jack industrial machine. Could you talk about needles that can be used and how to change. Also what bobbins are used for Jacks… I would like to buy extra. Really happy you talked about what each function and how to use each…thank you

[@ozcommercialsewingmachines]

Thanks for the suggestions Sandra, we will certainly do videos on the subjects mentioned.

[@Caroline-ue7lp]

Thank you. Just what i needed!

[@ozcommercialsewingmachines]

Glad it helped!

[@alexanderboardman5127]

How tight should the tension disks be? Thanks

[@spidee7711]

Your video is Halping me today .... Thank you so much Bro

[@ozcommercialsewingmachines]

It's my pleasure

[@Pixy_Flower]

what do you do when it don't wine

[@hannawawrzyniak]

Dziękuję za filmik

[@miriamnahom3963]

Hi. Thank u so much! Question- can I wind the bobbin on my domestic machine? I just got my F5 today. Which bobbins should I order? Thanks again?

[@ozcommercialsewingmachines]

Hi! Your domestic machine takes a different bobbin to your JACK but there is no harm in trying to wind a domestic bobbin on the JACK. Your F5 takes industrial "L" class bobbins.

[@miriamnahom3963]

@@ozcommercialsewingmachines Thank you! I tried it but it doesn’t work.

[@sfletcher471]

Thanks for this video! Would truly like to see more videos Love this feature! Which bobbin would I need to order to have extra?

[@ozcommercialsewingmachines]

Depends on which machine you have, the "H" series machines use "M" bobbins, the "A" series machine use the "L" bobbin.

[@sandrawilsenach4631]

Was the needle going up and down while you were winding up the bobbin?

[@ozcommercialsewingmachines]

Yes Sandra, the needle does go up and down when winding a bobbin as there is no clutch on an industrial machine. Quite good really as you can wind a bobbin whilst you are sewing and if set correctly will dis-engage when full.

[@anniihiew1820]

@@ozcommercialsewingmachines so can't wind bobbin without needles moving?

[@ozcommercialsewingmachines]

@@anniihiew1820 that is correct

[@rociogonzalez1662]

@@ozcommercialsewingmachines what??? i’ve had my machine for a couple of years now and didn’t know this😅. it was always a hustle to wind my bobbins, i tried this last night and was able to wind 4 bobbins while sewing!!! thank you for sharing

[@fengirl8996]

I was sewing on my A2 and winding a bobbin, but...the bobbin overwound and i had to unwind and throw away a lot of thread. to make it fit in the bobbin case. This happened on two occasions, Is there an adjustment I can make to stop it overwinding. ? By the way great videos. very helpful. as most of the tutorials on the Jack are in hindi etc.

[@ozcommercialsewingmachines]

There is an adjustment you can make to stop this from happening, it should have been done by the technician when you bought your new machine. The little arm that you bring across to wind the bobbin can be adjusted so that less thread is put on the bobbin. Loosen the phillips head screw that holds it in place then move it slightly closer to the bobbin and see how that goes. It may take a few goes to get it where you want it.

[@fengirl8996]

@@ozcommercialsewingmachines 😀 thank you so much I did what you said it took a couple of goes but got there in the end. There are three videos you have made that have helped me. Thank you again. UK jack A2

[@إيمانالعرقي]

نريد لن تتوفر الترجمة للعربي