how to wire a dual voice coil 2 ohm subwoofer : dvc 2ohm sub

[@bodaciuos357]

thank you. finally some one who broke it down. to where it made sense to me anyway.

[@hotnuns69]

fr\

[@lucanmajesty3036]

Wish my math teacher was like you. Thank you boss💯

[@jptheinstallguy]

@@lucanmajesty3036 💪🏾💪🏾

[@Clare.1985]

Thanks man. Could watch your videos all day brother.

[@noerosas8643]

Great video, straight forward.

[@themafia3119]

Thanks. Great explanation. I bought a dual 2 ohm voice coil subwoofer from Stereo Integrity and was trying to figure how to wire it up as 2 ohm. I guess I have to run 4 ohm in this case.

[@jptheinstallguy]

Yes if it is a dual 2 ohm your wire options are 1ohm or 4 ohm I'm glad I was able to shine some light on your question💯💯

[@OSJO65]

@@jptheinstallguy in short if i buy a DVC 2ohm there is no possibility of utilizing the sub as 20hm only 1ohm and 4ohm?

[@themafia3119]

Yeh that's what he said​@@OSJO65

[@JonathanGarcia-zn8rz]

​@@OSJO65unless u just get 1 2ohm voice coil sub.

[@chills2193]

Thanks man. You saved me from making the wrong sub purchase.

[@djyayme3474]

Thanks this video helped a lot

[@brittany9151]

Very very helpful just got a scar evl 12 d2 and I was running both coils strait to both ports on the amp I have a 2k rms scar mono block amp and it’s confusing me on if that could give me 2 ohm or not if u have any feed back lmk!!!!

[@JonathanGarcia-zn8rz]

Hell yeah...finally my boy explained on point...i was wondering why the 2ohm skar EVL sub comes wired to 1ohm? I have a 2ohm amp so i want to keep it at 2ohms...thank you

[@NateMoons]

thank you bro

[@johnathonoppel393]

I understand the single sub but after I do the second the same way do I need a second power wire or does each side of the voice coil attach separately

[@rustybrown9829]

Thanks.

[@Triniadventures-c3d]

I have a 2ohm amplifier and a 2ohm duel voice coil subwoofer can this work together

[@johnbathgate904]

If you have a 2 ohm dvc sub and want to run a 2 ohm load drom amp its very easy to do that. If u have a single channel mono amp with dual speaker outputs run one set of +/- to each voice coil amp will see a 2 ohm load . If amp only has one set of speaker outputs run 2 + wires out of amp + terminal and run 2 - wires out of amp run one +/- to each voice coil . Both these ways allows you to use a 2 ohm dvc sub and have the amp running a 2 ohm load. That is the correct answer to the original question.

[@cmb-b5h]

I am using a Crown xls 1502. I have Dayton um15s in separate boxes. Is it possible to wire the subs to each channel of the Crown and produce 2 ohms. Just like the above video, everyone is telling it's either going to be 1 ohm or 4 ohm.

[@Zanman08-zm8di]

Would it be a positive jumper wire or negative jumper wire

[@Stolencamaro]

Best explanation

[@jptheinstallguy]

@@Stolencamaro thank you

[@Jdk877]

So if I have two amps already and i want to test wiring each amp to a single coil.. ill need a second set of connections on my sub box to achieve this right?

[@JustinLockamy-lo7xx]

Thanks bro you broke it down just to my level of understanding, look forward to seeing more of your useful content.thanls again

[@TekleMeElmo]

Question, I have an Audio Art 400x2 and a Punch 800.a2 amp. Not sure which amp I’m going to use but what I need to know is, should I go with dual 2ohm or dual 4ohm subs?

[@Jay.Frederick1974]

So I have two 2 ohm dual vc subs and did what you mentioned and turned them into 1 ohm in which I successfully did and they individually tested at one ohm. But as soon as I hooked them up to the monoblock they tested at .07 at the amp. I'm guessing this is because the two positives and the negatives at the amp are connected. Would this mean that I have to disconnect the jumpers at the speakers considering this

[@milianos076]

This what i needed thnx so much ❤

[@jptheinstallguy]

No problem 😊

[@tatesmobilewashandinstalla7025]

Cant you take two dual 2 ohm subs and wire them parallel-series? That would drop the load back down to 2 ohms. Youd run jumpers from + to - on both subs then + to + from one to the other and - to - from one to the other and run your line out from those two. The jumpers from + to - will make the subs 4ohms each until you run + to + and - to - then it drops back down to 2ohms. Am I understanding that right?

[@2010bassking]

Hey, I have a Dayton audio Spa 1000 active module and I bought a Dayton audio um10-22, which is a dual 2ohm woofer. If I connect everything as shown in the video, I automatically have 4ohm? The module and the woofer are for my Sunfire mk2 subwoofer. I only connected a voice coil to the module for testing, but no real performance came out of it.

[@josephlara7970]

Hey so I have 2 dual 2ohm subs with a kicker 1200watt-2400max 1ohm stable amp. How should I wire this?

[@slowbrezze]

wire it most efficiently 2ohms more efficient Lee's strain and control amp plus box control the sub 1ohm if u got the electrical

[@marvinwake9987]

Probably a dumb question but can you wire 2 2ohm dvc subs to 4ohm?

[@brutusdior1550]

I have a w7 connected to a t1000.1. I tried connecting a LC1500.1 (without changing any wiring to the sub) the amp was clipping at low volume and no matter how I turned the gain nothing changed it just showed protection mode.. is the amp bad or is the wiring causing this

[@Boomie0419]

So how do I do this without using a jumper wire? Basically the two wires won't fit into my terminal. So I'm trying to figure out how to connect the wires outside of the terminals on the subwoofer

[@don-magiclivescope-juan8752]

So quick question jp I have a bxx3000.d Brutus high phonics and am between getting the 15 orion hcca 15.2 or 15.4 for more power or trying to drop the ohms help me out bro thanks 🙏🏿

[@charlietuggey5891]

hey, I've been looking at your videos and I'm trying to wire an amp to my 2002 Cavalier but the battery terminal is different from every video I've seen and I'm not sure how to properly wire it without damaging the rubber around the terminal, if you could give some advice that would be fantastic. Love the videos btw, the most helpful audio equipment videos I've seen.

[@0397rb]

Get an adapter

[@michaelmincey2622]

Cam you do a video on wiring multiple subs? 2 subs, 3 subs, 4 subs and so on. Much appreciated on the videos you do. Thanks.

[@jptheinstallguy]

BOOM kzbin.info/www/bejne/r5faZqCHqrqJoJI i made this video a few months ago how to wire 1 sub up to 4 hope this helps

[@michaelmincey2622]

@@jptheinstallguy thanks. The video helped me out. Gotta rewire my 3 Skar 8's this weekend before I fry the amp. Lol

[@robertpope5185]

Question I have 2 15in zvx dual 2ohm skar subs can I hook them up the same way

[@jptheinstallguy]

Yes they both dual 2's

[@leviholland5783]

Thanks💪🏼

[@johnd0ugh]

if i have a 2 channel amp can i run 1 on each coil?

[@briannash7960]

I'm confused I've heard that a 2ohm dual voice coil can only be wired, 0.5 ohm, 2ohm, or 8 ohms, is this true? I'm wanting to get a 1 ohm load.

[@tumi058]

I'm kinda lost here, i have a double coil sub but my amp got 2 ohms.... How can i connect that?

[@silver831cali3]

Hey did you figure it out? I just bought online a 2ohm sub and a 2ohm amplifier. Sub 1,500 watt RMS Power 750watts Amp 2 ohms: 1200 watts x 1 chan. Im unsure of it and don't want to mess it up

[@tumi058]

@@silver831cali3 i connected the parallel connection unfortunately it was shutting my amplifier off.... Then i used the one wire connecting red to black from other side to the other.... Then the remaining red and black i connected the wire to amplifier.... Its been 7 days now my amp is not going to protection mode...sounds better

[@mattjb160]

what gauge wire should you use for a jumper wire

[@marlonoriley8821]

I ordered 8ga wire and ordered 8ga banana push terminals for the sub and the box. Seems to hold up fairly well.

[@abnerbustillo-br8pn]

What happens to the max watts when you go from 2ohms to 4ohms?

[@firebender3092]

you are going to be running less power at 4ohm

[@jptheinstallguy]

Nothing happens to the power handling of the sub, but the amplifier will provide a different amount of power from 2 ohms and 4 ohms

[@jamaicasgodson2125]

So which ohm is better 1 or 4

[@jptheinstallguy]

Easy answer would be just that 1 ohm will give you more power than wiring to 4 ohms because the resistance is lower, but amp will not run as efficient as 1ohm vs 4ohm

[@jamaicasgodson2125]

@@jptheinstallguy so which would you prefer

[@jptheinstallguy]

@@jamaicasgodson2125 i usually run all my systems 1ohm

[@briannash7960]

I have 2 dual voice coil skar dd2 10 inch subs

[@jptheinstallguy]

If you want 1 ohm at the amp you need dual 4 ohm subs to wire together or 1 2 channel amp that is 1 ohm stable and wire each sub individually

[@ToyaWashington-c7l]

Amani Route

[@OrgestFrashëri-z6d]

Justen Orchard

[@MalachiRodney-l6f]

Wilford Road

[@SalomeFabian-k8c]

Lennie Common

[@HertyEden-e3z]

Virginia Ranch

[@kingsuavorico6126]

i didnt know you could wire a dvc 2ohm to 1 ohms

[@Stolencamaro]

As makes no sense when they selling it and say 4 ohm with 2 conection when is real life 2 ohm when u conect

[@terrylouis1341]

Very good video brother you explain it very well thank you very much 👍

[@StrongPaula-f4g]

Runolfsson Views