How to wire an automotive spdt relay to power more accessories

LETS MAKE THIS EASY
SUBSCRIBE FOR MORE CAR AUDIO DIY TUTORIALS
How to power more accessories with a relay
This is a car audio how to tutorial that will show you how to amplify your low current ignition so you can wire more accessories. A relay is a big switch and once you know how to use a relay you'll find out its pretty easy to wire a relay. We are using a 12v relay or 12 volt automotive relays. Its actually a spdt RELAY there are also dpdt relays but we are only using the spdt
🔻
WHAT TO WATCH NEXT:
HOW TO WIRE A RADIO: • Car stereo wiring harn...
HOW TO STRIP A WIRE • How to strip your wires
HOW TO PLAYIST: • how to
🔻
Parts used for this install are:
🔻
Want to support the Channel? Join me on Patreon and get exclusive content and GIVEAWAYS
www.patreon.co...
🔻
Samsung Glaxay 10e amzn.to/2SiKVKI
~Check out my first channel if you love BASS~ / jpsaudio08
🔻
~Tools I Use almost everyday~
NEW Milwaukee right angle driver amzn.to/2t4mDvM
NEW Milwaukee right angle drill amzn.to/2GwZAwQ
Install bay panel removal tools: amzn.to/2Jv4XiP
Install bay Speaker tester amzn.to/2LHOYki
Digital Multimeter: amzn.to/2Hcz111
Milwaukee drills: amzn.to/2Lxvu1y

[@TheBlackBeltPanda]

30 is your power in, 87 is your power out to device. Hence the 87a (also power output to a device), which is on when the switch is off where 87 is on when the switch is on. The way you have it setup technically works, but power flows the wrong way, essentially connecting 87a and 30 (your device) together when the switch is off and disconnecting 87a from power when the switch is on.

[@mxcollin95]

You’re a great teacher bro…that explanation was really clear made complete sense! Thanks for posting!!! 👍🍻

[@jptheinstallguy]

Glad it was helpful!💪🏾💪🏾

[@runn1nwith5izzorz]

Another helpful and informative video by you. Thank you for your selflessness and the help you provide to the normies like myself. I have used relays in the past but your video helped me actually understand in layman's terms how and why they are required/applied.

[@jptheinstallguy]

thanks for those words bro.💯💯

[@runn1nwith5izzorz]

No problem. It's all 💯 I've watched a few of your videos and with each one, I feel i become more prepared and ready to tackle my car audio install.

[@jptheinstallguy]

@@runn1nwith5izzorz literally the exact reason I make them to give confidence and make your install life easier

[@rednoize4391]

excellent video very detailed and helped me a lot, my question is why do you have a jumper from 86 to 87 ? just curious wouldn't that have a constant source of power... on 86 and 87 ?

[@danthemanbruin7651]

Great job, man. I've watched a few relay videos and yours by far has the clearest explanation of how they work. Thank you

[@steveleston1848]

thanks JP for explaining, my 05 chevy express orginal radio harness didn't have the switched 12VDC the fuse blocks are very hard to acess. so I'll connect my first relay to climate controls stealing it's switched 12VDC an steal the constant 12vdc & ground from old radio harness. out 30 to new radios yellow wire switched 12vdc. excellent video

[@Tito-op7xn]

Lots of useful information that relates to my situation regarding LED. Very clearly and simply explained. Much appreciated for taking the time to post this.

[@eliasmartinez7407]

I really appreciate this also can you show how you would wire two 40 amp relays to a toggle switch

[@MongoKustoms_aka_Jayson]

Thanks, this will help for the relay for a vacuum pump...and the switch

[@noelstaar]

Good video man. Thanks for the info!

[@weatherornotsubaru]

Hey, I've got a LED switch that has 4 prongs on the back. What's the best way to wire that up using a relay? I was thinking the top two prongs are hot/ground for the switch itself...and once the switch is flipped it sends power out using the bottom two prongs. Would I need to use both bottom prongs to hook up to the relay? Think I would only need the 'hot' side to go into the relay? 2nd question, what's a good place to ground that LED switch inside the car (driver's side)? Trying to avoid running a ton of wires through the firewall. Hoping to tap into the in-car fuse box (down by driver's left knee) for the switch and then ground it somewhere in that same area. Then run the hot wire from the bottom prong out through the firewall to the relay that'll be in the engine bay. I'm wiring a lightbar to the top of my car. I'm using a 20amp relay (lightbar is 16amp) Thanks!

[@1ohmwrecker]

Have you seen the video bare vids did where he hooked up 8 amps of all different types and it still pulled less current than a relay by itself?

[@dirtyjersey]

You've made this make sense. Thank you 😊

[@JM-im1iu]

Thanks, I was trying to see if I could run a second relay off of the first or if I needed to tap into a second remote wire.

[@jptheinstallguy]

Glad I could help

[@LordRa88]

Dude, you're awesome. know your stuff. good work

[@jptheinstallguy]

Thanks you 💯💯

[@litdoe7021]

I have drl strips and can i tap into a relay inside fuse box to make them turn on when cars running and off when its not?

[@wolffredd2664]

I have some footwell led lights and a map light I want to wire together to the same ignition source. I used an empty spot on the fuse box. Since the spare map light is white and I’d use it for maybe a minute to find something, but I’d use the LED’s by themselves for longer periods, Would this be okay? I wouldn’t be drawing power from them constantly- most of the time they won’t be turned on. And probably never at the same time.

[@uniquereviewshacks2121]

good explanation

[@christopherbeveridge3969]

You did that all wrong 30 goes to the battery 86 is your low voltage power 85 is ground 87 comes on when low voltage is on and 87a has power when there is no low voltage present and opens when low voltage come on

[@markbest4230]

You're correct. But instead of saying low voltage, I'd replace that with turn-on signal. It will make more sense and be less confusing. It's all low voltage! And, instead of low voltage power, use constant 12V+.

[@kylebell2365]

Good stuff…nice video

[@jptheinstallguy]

Thanks🤝🏽

[@stspringer2003]

Nice video, however everything I have read states that pin 30 should always be power and pin 87 would be your accessory. I know it will work how you explained it but I wonder which is more correct.

[@jptheinstallguy]

honestly you can use either or 87 or 30 both of them connect to 87A

[@raygibson1295]

Show how to tune Amplifiers

[@jptheinstallguy]

ok ill start working on that for you guys the next time i do an amp install

[@Derickltjr]

Dope!!

[@MotoAtheist]

I installed a hidden switch that I can kill the system if I need to take my vehicle in for auto repairs, etc. Keeps the shop guys from playing with it and blowing S up.

[@TrunkThunderLithium]

Actually you can wire alot off your headunit. A amp needs barelt 3% of 1 amp to turn on. Remote wire doesnt need power. I literally had sbout 12 things clicked onto the same remote coming from kicker LOC thsts using my stock sub wiring for signal/remote turn on. The stock sub is unplugged so that should explain rigjt there you dont need shit really for actual power. Guys mess up qn try to use 22g wire for all their remote wire ehich is to small to Daisy chain with