How to wire guitar with a single humbucker with pickup volume control and Invader Pickup Review

Рет қаралды 16,573

Күн бұрын

Basic instruction on how to wire a single humbucker guitar with one volume control. I also review the Invader Clone style pick.
Kmise Neck
www.ebay.com/i...
Invader Pick up
www.ebay.com/i...
KAISH 11 Hole ST/Strat Style One Humbucker Guitar
www.amazon.com...
Electric Guitar Pots Guitar Linear Potentiometer B500K
www.amazon.com...

Пікірлер: 43

@OldMike1958 11 ай бұрын

Good work! Thanks for share it. I am making my own Tom Delonge starting with a guitar that comes from the war... I think because is a disaster. Your video is a masterpiece and I and so gratefull. Regards from Argentina!

@suburbanbadass6962 11 ай бұрын

Thank you and good luck !

@kdubdoom4696 Жыл бұрын

Man you make the best how to videos ❤ you explain things so well! Thank you!!

@suburbanbadass6962 Жыл бұрын

TY! I appreciate the feedback...

@caseyshelton8388 Жыл бұрын

Very helpful. Exactly what I needed. Thank you

@guitarfreek01 6 ай бұрын

This helped me so much. Thank you 👍😊

@rontron418 11 күн бұрын

it seems like this video was made for em. thanks

@suburbanbadass6962 11 күн бұрын

What are you referencing?

@PatrickSalsbury-bf1qh Жыл бұрын

I might suggest a 2-meg pot and a rc network treble bleed across volume tabs. You will like 👍

@joeking433 2 ай бұрын

Should have used the dremel on the bridge side of the pickguard. Doing it at the neck will throw the screw holes off.

@suburbanbadass6962 2 ай бұрын

They were gonna be off either way.

@walther9161 Жыл бұрын

Great explaining this… Q:if you have a bridge pickup and no cover plate or pick guard….How do you connect it to the bridge/tail piece? Connect it to the nut serts in the body? Thanks again!!

@suburbanbadass6962 Жыл бұрын

Are you asking a wiring question? or are you saying that your bridge pick cavity is routed into the body of the guitar?

@Man_named_guiseppe Жыл бұрын

Im trying to find one for my 7 string single humbucker flying v and im gonna try to follow what your doing

@Candylario 8 ай бұрын

Nice!

@michaelmoralevitz4112 11 ай бұрын

Japan pickup. I have a few not the best but for the price. Try Dragonfire pick ups around 60$ to 80$ a little better

@joeking433 2 ай бұрын

I wonder if you really get what you pay for with the more expensive pickups? I mean, it's not rocket science to make a pickup, you wind copper wire around magnets. You can buy the best pickup components for a few bucks, maybe $15.

@michaelmoralevitz4112 2 ай бұрын

@@joeking433 pick up a low price pickup and a expensive one you'll feel the difference.

@CodClip 8 ай бұрын

Do you know where would you solder the ground wire with a hard tail bridge? Thanks for making this vid too, exactly what I was looking for and to the point

@suburbanbadass6962 8 ай бұрын

TY, the ground would go to one of the bridge posts, that are set into the body.

@joeking433 2 ай бұрын

Just put the stripped end of the wire under the bridge and then screw the bridge down on it. That's how the guitar companies do it.

@GopherGuts2000 9 ай бұрын

Very helpful, thanks. GO BIRDS!

@jeromelogan1341 6 ай бұрын

I have a Fender Lace series pickup with 3 wires coming from the pickup white, orange, and green. Is the green a negative,? and if so where do the white and Orange go?

@joeking433 2 ай бұрын

I don't think people can really tell a difference between most pickups as long as they are made the same such as using alnico 5 magnets. There's really no way to differentiate them. Most people who claim to hear a difference in a boutique pickup compared to a Seymour Duncan compared to a cheap Amazon pickup are deluding themselves. They're hearing what they WANT to hear!

@suburbanbadass6962 2 ай бұрын

After I finished this guitar and playing around with this pup for a while it does sound pretty good, gets the job done, but Not as much volume and high output or dynamic. It’s a great alternative for hobbyists. But a good player can make anything sound great right … thx

@suburbanbadass6962 2 ай бұрын

These are also physically not as heavy as a name brand.

@nickcawelti1252 Жыл бұрын

Let’s get to geezz

@barrytrewern3347 9 ай бұрын

I'm playing around with a p bass and changing it over to a lefty with the tone pots removed , pickups will go straight to volume then to the jack . will I need a capacitor or not .I don't play , it is just a project so advice would be great

@PobjoyFranks 9 ай бұрын

Ive just bought a Harley Benton dc junior and want to stick in a humbucker for that high powered Dead Kennedys stinging bite sound on Saturday Night Holocaust..any ideas ?Seymore or DiMarzio?

@joeking433 2 ай бұрын

Wind youe own!

@galacticoasis 10 ай бұрын

No tone control??

@kikiow8909 9 ай бұрын

I believe this is for the Tom delonge Strat and his has no tone control just a volume knob😁

@luciferseven1426 5 ай бұрын

In many cases, if one plays alot of heavy stuff, tone is hardly ever used

@joeking433 2 ай бұрын

This is doing what Eddie Van Halen did on his Frankenstrat, one pickup one volume. The tone control does stifle some of the frequencies, or at least that is what Eddie said.