How to Wireless Power Transmission System work? Self Made Project/Electrical Technology 2019

Circuit Diagram & PDF Report Of This Project👉🏻:- mirzaabdullaht...
•My contact:-
Sorry for WhatsApp,
And no need to contact more, Because i have already provided you my all helping material.
Thank you!
Email:- [e-mail]
How to Wireless Power Transmission System work? Self Made Project/Electrical Technology 2019
•Required Apparatus for this Project:-
15/12V Transformer (1)
IN4007 Diodes (8)
Capacitor 2200 MicroFarad,50volt (1)
Heak Sink (2)
7812 Voltage Regulator (1)
1.5Kilo_Ohm Resistor for induction led (1)
Indication Led (1)
TTC5200 Transistor (1)
5W5K6J Resistor (1)
24 Gauge Copper Wire
6pin Dc 2way switch (1)
Load (Leds light with 15kilo_ohm resistors,Car mobile charger or 12V Dc fan)
PCB board (4)
Stand board
Glue Gun
Electrical Tools
•Note:-
In this project
Primary coil have 160 turns.
Secondary coil have 150 turns.
And it's Diameter=6×6 inches
(But you can change it also as your requirements)
Message for All Viewers:-
If you complete this project, So then don't forget to show me by email.
And give me the feedback also about this project.👍
•Project Discription:-
The wireless power transmission can be defined as, the energy can be transmitted from the transmitter to a receiver through an oscillating magnetic field.
It works by the principal of Electromagnetic Mutual Induction.
It have no any physical connection between the coil but the power is transfer from one medium to other medium.
Wireless Power Transmission System/Self Made Project/Electrical Technology 2019
[ • Wireless Power Transmi... ]
Thanks ☺️👍
#ElectricalProject #ElectricalTechnology
#Electronics

[@arceusff4450]

Okay I have made this in 4 steps ! the input was 9 volts whereas the output was only 1.5 volts when I keep distance between two coils to 15 cm. When I keep them closer, I got upto 4 volts as output. I presented it in my district science competition and won $500 as prize :) I still think that your one is better than mine!

[@pratikgirhale7324]

We want help bro

[@mohdhamzaanwar5482]

Please give circuit diagran

[@Jousef9]

Why are you rectifying before the transmitter coil? How can DC be transmitted through coils?

[@sumitpradhan9679]

I infact on behalf of my group i thank you whole heartly for the wonderful project and demonstration.

[@mirzaabdullaht]

Pleasure❣️

[@swagatchhetri6692]

Being a member of this group, i thank you for sir for the matter that you provided us.

[@mirzaabdullaht]

You're welcome ☺️

[@dnyaneshwarmarewad988]

Plz mujhe bhi information provide kro plz

[@preparegatewithme6814]

Its a very helpful project . I really appreciate the makers of this vedio. this is a nice example to learn about wireless power transmission .

[@mirzaabdullaht]

Thank you so much❣️ And Stay Blessed👍

[@mohdkhaleel5748]

Finally i found the clear explanation about this project in this video. Thank you very much for uploading this video with clear demonstration. Thank you

[@mirzaabdullaht]

Welcome bro. It's my pleasure ❣️

[@atulchaudhary826]

@@mirzaabdullaht pls provide the circuit diagram of voltage regulator, transmitter and reciever circuit

[@mirzaabdullaht]

Message for All Viewers:- If you complete this project, So then don't forget to show me by email. And give me the feedback also about this project.👍

[@RKCONCEPTCLASSES]

Bhai, can you provide the circuit diagram of this project to me Because I am final year in diploma ELECTRICAL ENGINEERING SO I Make the project Plz help

[@RKCONCEPTCLASSES]

My g mail id [e-mail]

[@mirzaabdullaht]

@@RKCONCEPTCLASSES check description..

[@RKCONCEPTCLASSES]

thanks

[@sonuchauhan3398]

My gmail id [e-mail]

[@AMMalik]

Wao great. you are genius. May god give you more success in life. also pray for me. M vloger from Islamabad

[@anugugreeshma8469]

Sir, here we used dc power means constant flux and coil is constant there is no cutting of flux then how it produce emf

[@ramsajan87]

thanks sir..... it's project presented by you it is very clear explanation and very helpful for me to make this project

[@mirzaabdullaht]

Welcome ☺️🙂

[@kadam1512]

Thanks bro for providing me all information ...vry neat and clear explanation. Very helpful for me to make this project

[@mirzaabdullaht]

You are welcome👍

[@dnyaneshwarmarewad988]

Kiran Kadam plz sir provide me information also

[@vilankumar7976]

Tnx for your support i completed our project 😍😍😍.

[@mirzaabdullaht]

Congratulations 👍

[@RajeshKumar-ir2qz]

provide clear circuit daigram to me Plz hurry up

[@yamansahu95]

Circuit diagram mil sakta h kya

[@sirina6510]

awesome video 😍😍 keep it up!! . waiting for more projects and wish you all the good luck 💙

[@mirzaabdullaht]

Thank you so much ☺️ And i will try to do my best👍🏻

[@raviduttsharma8172]

All ok sir project is fantastic but make a video on this project connections and working explain briefly

[@raviduttsharma8172]

What is the principle behind this project

[@sauravpandey7767]

Thank for providing information

[@dnyaneshwarmarewad988]

Saurav Pandey sir plz mujhe bhi informations dedo plz

[@yogeshyogesh4169]

It was really useful hats off for your wonderful work.

[@anasmir2315]

Abdullah bhai acha project hai ...wow

[@himanshunarad4849]

I am the student of Diploma in Electrical Engineering. We have choose this topic for final year capstone project. We have also purchased the components provide by you in the discription. We want the circuit diagram of the project.

[@ritshnagariya234]

Supprb

[@navjotsingh8008]

a perfect project this is what i have made for my final semester project. just need circuit diagram

[@mirzaabdullaht]

Just Contact me on what's app or gmail.I will provide you.

[@AbhishekKumar-yd5cw]

I think you should collab with ibm they need you

[@scienceMUK1]

@@mirzaabdullaht sir we need you contact no BC it's our project plz reply with contact no

[@VipinKumar-ei3lp]

Thank you so much sir for helping us

[@pawanbhagwat.4382]

Thank you sir

[@PowerSystemOperation]

VERY NICE ❤❤❤❤

[@faracinevictor3793]

Kya bt h jnb

[@mirzaabdullaht]

Oo Jnab!❤️🙌🏻

[@dhanunjaypembarthi453]

Jii... Toda cost bataiye total project ka

[@officialIdrismusic]

Thank you so much for sharing your project with us with such a clear explanation of everything!!

[@mirzaabdullaht]

Guy's now you can contact me only on gmail OR in the comment seccion. ID is given in the discription👍 Thankyou 🙂

[@quantummasterclass5557]

Sir how to decide number of turn of coil along with area for 12 volt transfer???

[@shaleensingh8413]

Sir, what is diameter or gauge length of the Copper wire used ?

[@mirzaabdullaht]

24 S.W.G, Diameter is 6×6 inch and about length of wire, Sorry i have no idea because i don't measure it.

[@mirzaabdullaht]

@amarnath sharma Primary 160 turns Secondary 150 turns.

[@mirzaabdullaht]

Just a mail me, then i can provide you the circuit diagram.

[@mirzaabdullaht]

@amarnath sharma Good.

[@safitski3958]

@@mirzaabdullaht how to make 1 mitter transmission ,pleas help me

[@himanshunarad4849]

Please give us the circuit diagram or photos of connection

[@MuhammadAhmed-gm1bv]

you didnt answer the question in the title- the thing i came here for... i guess you yourself were asking the question too 😂

[@Sanjay_Ak__]

It's possible 😮

[@cricfic]

Yehhh thanksss finaly made thiss😻😻

[@mirzaabdullaht]

Oh Great! You make my day😍 Congratulations 🎉 But you should to show me your project. Contacts Given in the Description of my video☑️👍🏻

[@cricfic]

@@mirzaabdullaht okay i will send my project video on your Email!

[@Funnyman957]

@@cricfic helo sir

[@shivajiekhande1301]

Provide the video of soldering of this project

[@AK_Dahiya1109]

TTC 5200 transistor kaa kya work hai Or jo coil m mutual induction ho raha hai wo DC m hai ya AC

[@abbireddysathish1665]

Sir..I have a circuit for this but power not transmitting...how to make coils plz help me..

[@mirzaabdullaht]

👍🏻

[@mamasboy7398]

sir can you share something about its efficiency on various distances

[@mirzaabdullaht]

No, Sorry

[@nia.375]

Sir what we did you use 5w5k6j resistor... Pls answer me sir

[@rajoligirisaimadhav2365]

what is the length of 24 Gauge copper wire , it required for 310(160+150) turns of coils?

[@ht7642]

In transmitting end in 160 turn what about loop ? Why should take loop ?

[@nayanmahato8923]

Sir iska ak video bna dijiye plz..keise banaya uska pura

[@menzichannel426]

is it possible to remove transformer and use pvc as our supply?

[@mirzaabdullaht]

Sorry, I don't know!

[@RSElectronics3901]

instead of using voltage regulator for 12v supply, can i use 12v step down transformer ?

[@Amankumarroyamankumar]

How to make what are the material required for it

[@preparegatewithme6814]

Sir , approximately how much length of copper wire is used???

[@mirzaabdullaht]

About length of wire, Sorry i have no idea because i don't measure it.

[@preparegatewithme6814]

Ok sir . We are also making same project can u approximately tell how much length of wire will be required?

[@mirzaabdullaht]

@@preparegatewithme6814 I tell you already about it.

[@avg816]

How the AC supply is given?

[@yogeshyogesh4169]

What are the products needed? How much does it cost bro?

[@mirzaabdullaht]

Check description!

[@mirzaabdullaht]

Check description!

[@yogeshyogesh4169]

Thank you bro

[@yogeshkumarsrno.4986]

Sir pls iska circuit diagram provide krwa do🙏🙏

[@lokeshparmar3851]

How much max distance is possible between primary and secondary coil?

[@mirzaabdullaht]

It's depends on the level of project.. Btw in this project 1ft distance is possible.

[@sundarapukirankumari3745]

Thanks for uploading such a nice project. But where should we use the heat sink.

[@mirzaabdullaht]

Check circuit diagram, link is given in the description.

[@rajoligirisaimadhav2365]

where did you get that 5W5K6J resistor? do you have any other alternative resistor for this? if no., send me the link where to buy that 5W5K6J resistor.

[@venkateshejjigiri-4137]

How the coils are connected ?

[@poojashri6767]

These coils are centre taped. Refer the circuit diagram

[@mubashranabi6311]

I am unable to get resistor of 5w5k6j. I got 5W2K7J resistor

[@rameshbabu1940]

Sir ,if IC is used ,what shud be the range of tht for 12 V transformer

[@vivekam5385]

Could you explain the connections of the 2nd page of the circuit diagram which you uploaded in the report???

[@bright2381]

Pcb number how much

[@gilbertalaurin]

Can you make a 12v high amp output version of that?

[@anugugreeshma8469]

Sir we are dc power and constant coil then how can we produce emf

[@liyaquthali8761]

best projects for my school students sir, please send list of all materials used in this model plz

[@mirzaabdullaht]

See in the description

[@liyaquthali8761]

ok sir i viewed thanks for reply

[@avg816]

Can you please show the block diagram for this?

[@maryoriley1907]

What can i use to replace the 5w5k6j resistor and TTC5200 transformer? Because i don't have them available

[@cricfic]

U can use two 5kw3kj series connection

[@techtravelertales1]

how much current can it pass

[@dalalianusha2105]

Bro, how did u connected the load for mobile charging.

[@shaikabbuthaheer2937]

Sir why u taken 160 and 150 turns? How u calculated that turns ?

[@meme5646]

Sir, can you give me this project?

[@poojashri6767]

Can anyone pls tell how to select resistor ohms and watts? With an example pls?

[@officialsmartlegend]

5w5k6j aa register maltu nathi koy biju use Kri sakay

[@azharalii5537]

How much does it cost???

[@sanjayadhikari_]

Can I use 5W4K resistor is it ok???

[@hihellogoogle7125]

How component connection arrange detailsplease video

[@krishnabadrinath1114]

Why you have used ttc5200?

[@nutankumari2109]

How much is the distance between the two coils??

[@lalitsaini9760]

Transformer kitne ampere ka hai or LED ke sath kitne watt ke resistor lagaya hai bhai pls btao mujhe college me project dena hai

[@agree_to_continue]

Sir , can you please provide the circuit diagram. Thank you

[@sushantkumar1235]

what is the use of transistor here.

[@akashgarg5404]

What should be the diameter of the coil ?

[@mirzaabdullaht]

6×6 inches.

[@akashgarg5404]

@@mirzaabdullaht will there will be any significant change in flux or current if we reduce it to 3×3 ??

[@mirzaabdullaht]

@@akashgarg5404 Yes only will be the differences of level project.

[@noumanaslam8220]

This project haven't working according to requirements.. when some thing like dielectric place inside the medium ..flux doesn't change . How would you say that this project is working in good condition ..Also its not fyp project

[@noumanaslam8220]

Work on it ..inshallah in future this technology will used..Best of luck ..

[@sunilprajapati2531]

Isme number of turns kaise selection karte Hai uski calculations Kya hai

[@vilankumar7976]

What is the cost of this project

[@mirzaabdullaht]

It's one of the best project which is not too much expensive. Round about Pkr(1000-1500)

[@akashgarg5404]

How many turns should be there in the coil ?

[@mirzaabdullaht]

it's depend on requirement of project.

[@akashgarg5404]

@@mirzaabdullaht we have same project like this only ..

[@akashgarg5404]

@@mirzaabdullaht at load we are having leds and a charger

[@mirzaabdullaht]

@@akashgarg5404 Would you like to show me?

[@mirzaabdullaht]

@@akashgarg5404 That's great.

[@tusharkumbhalkar7811]

Circuit diagram send karo na

[@AbhishekKumar-yd5cw]

Sir can you provide your patent idea to IBM

[@poojashri6767]

You can't patent it because it is already patented before many years

[@dharaiyadivyesh2010]

5k5w6j resister where to buy

[@roshandahal6639]

I need you help if you can plz reply me

[@atulchaudhary826]

Pls. Provide the circuit diagram of voltage regulator, transmitter and reciever circuit

[@mirzaabdullaht]

Contact me on Gmail

[@ogbeidejosephosaro3630]

Can I get a circuit of 1metre range????

[@maryoriley1907]

Sir Will there be a change in flux if i reduce the diameter to 4×4? Or if i reduce the number of turns to 100?

[@mirzaabdullaht]

You can change, if you want.. But it will be work.

[@bumgctech26]

His project ka circuit diagram banaa kar bhejo

[@cdtmamidianudeepa-vec8255]

Need block diagram of this project

[@romisah7173]

Sir if I want to in-depth knowledge about this phenomenon and the working and how to vary distance and current, which book or site should I refer too? please help

[@mirzaabdullaht]

Sorry I can't suggest you any book because i just follow the books which include in my college sallybus👍🏻

[@meme5646]

Sir can you give me this project?

[@mohdhamzaanwar5482]

Please provide the circuit diagram

[@cricfic]

Coil wire ka size kya hain plzz tell

[@manojbhaiamaliyar8792]

How many Required of wire

[@vishalThakur-sw4zz]

Sir mujhe apke is project ka connection dekhna hae kaise dekh skta hu plzz help me

[@technicalsaeed7374]

Led ke liye kitne ohms ka resistance chahiye

[@shrutithulkar1408]

hello, sir what's up no wrong hey

[@mirzaabdullaht]

No it's alright 👍

[@HimanshuYadav-jg2ru]

If the coil is less than 160

[@bandikrishnaveni7228]

Bro , can you please say the materials required for this project again

[@bandikrishnaveni7228]

And also materials required for charging mobile 📱

[@sandipkundu3800]

Cost of this project??

[@mohannaik4338]

How much cost for making this model sir

[@mirzaabdullaht]

You can check all components price from market, But i can tell you it's one of the cheapest project.

[@butterfliesinmymind7646]

Bro what is the cost of this project?