How to Workout the Cable Capacities of Conduit Appendix E On-Site Guide BS 7671 Calculations Part 2

[@LindaTheLearner]

Gaz ... thanks so much for taking the time to share this ... your gift for teaching is Rolls Royce standard 👏🏻👏🏻👏🏻

[@lsnogaming2893]

Hats off to you Gaz still teaching in your spare time... 👏🏻🌟🌟🌟🌟🌟

[@WTFELECTRICAL]

Putting that thru box in was genius and makes perfect sense, what a tutor

[@GSHElectrical]

Concept audio Ltd thanks 👍

[@garethgalea4311]

You are an excellent teacher. Thank you!

[@GSHElectrical]

Thanks 👍🏻

[@jonathonc28]

Great explanation and I’ve learnt about the use of the through box to reduce conduit size. Thank you

[@2207amin]

Thanks again sir🎉🎉🎉❤❤❤

[@RWATraineeElectrician]

Loving these videos, cannot wait to get started on my journey next year 👍

[@LB-ui3dp]

Could you explain how you came to the conclusion that four 45-degree bends make two 90-degree bends? I cannot see what the Wiring Regs define as a bend.

[@si4651]

These chaps are lucky to have you! How does putting a through box in changes things in reality? Is the intention that the cables only get pulled through half as much conduit and so have an easier ride? The last half the cable will still have been pulled through both runs of tube, but I guess the friction/stretch would be less

[@GSHElectrical]

The box halves the length of the pull as well as the pull is now only around one bend... then your theory is correct 👍. Thanks for the support and watching. Gaz

[@surafelalemayehu5376]

Your Teaching technique is Excellent, I like the way you always refer back to the question at hand

[@2207amin]

Thanks🎉🎉🎉

[@adnanidf94]

Excellent video. Great help. Thank you Gaz.

[@GSHElectrical]

Thanks for watching 👍🏻

[@chrissmith7259]

Thanks Gaz, Appreciate this video has been some help.

[@RC-airspace]

Loving these videos they are helpping me with the City and Guilds level 2 Domestic Elecrical Courses (2365) at the moment thank you gaz `

[@richardwash6678]

Fantastic Gaz, MORE!👍😊

[@davidianwilliams2277]

Hi Gary, your youtube clips are brilliant! Any tips for someone like me to get into the trade?

[@GSHElectrical]

DM me on Facebook 👍

[@markguise4303]

Honestly what a great video. The teachers at my training centre dont even compare to this. If you were pulling twin and earth into conduit, how would you work out the conduit size. Eg. 2.5 t&e, would that be counted as two 2.5mm solid conductors and one 1.5mm? Or am I completely off the mark? Thanks

[@czarny31081983]

Love You...