How to Wrap Interior Trim // EASY DIY!

Today I'll be showing you the second part of wrapping your interior trim; the actual wrapping part. This is an easy DIY project that almost anyone can do with little to no tools! I highly recommend doing this if you don't like your interior and you want to make it stand out from the others. Thanks for watching and please subscribe!
Heat Gun - amzn.to/2oAHjEj
Glossy Carbon Fiber - amzn.to/2otbw7k
Matte Carbon Fiber (In Video) - amzn.to/2oWMwcw
SUPPORT JD CARS: www.paypal.com...
Intro Song: Down - Marian Hill

[@trilax59]

For everyone doing this, make sure you keep the carbon fiber pattern going in the same direction for the different panels. Otherwise, it might look a little strange.

[@JDCarsChannel]

Hahaha yes. Good point.

[@Dutch79]

The OEM carbon pattern is from left bottom to right upper. I did all the trim this way. You need to be aware that the roll of wrap is large enough to be able wrap everything with this proper and same pattern orientation.

[@basilt5022]

Started on my E90 last weekend and it's looking great. One small issue I became aware of and is evident in this video and others is the direction of the lines on the wrap. It would be more visually pleasing if they all went in the same direction. Compare the direction on the dash and the central console. It's easy to overlook. I almost did

[@JDCarsChannel]

Basil T Good point...I didn't even think of that until now.

[@sathyabalakrishnan8729]

this is one heck of a awesome video. The quality is good, good demo, music and job done at ease & neat. thanks mate. I got a vinyl carbon fibre wrap and E90 325d 2010. I just need some tools and heat gun to start this mod !

[@JDCarsChannel]

Thanks man!

[@karlcarrington9548]

nicely done you made it look alot easier than it is i bet

[@deividaslalala3341]

Am i the only one who can hear ""are you dumb"" in the intro music 😂

[@VNNZTC]

I just did my E39 Motorsport to change it from Wood to the same Semi Matt Carbon Fiber that you did and it came out awesome...one thing that you may want to mention is that it is very important to get the direction of the grain in this particular wrap going the same way...I had to redo one piece because of that...I am just about to put a new cover on the steering wheel and will wrap the lower part of the wheel at the same time...Nice videos, well spoken and very easy to follow...

[@JDCarsChannel]

Sounds sweet! Yes...I forgot to mention that, good job paying attention to it! Thanks for the support!

[@chasecc8145]

Looks great man, looks just like the stock carbon fiber trim

[@JDCarsChannel]

Thanks bro!

[@surjanpahal]

Just wrapped the trim in my 2011 328i, took about 5 hours but looks so sick keep up the videos man. hopefully you do a taillight tint one soon

[@JDCarsChannel]

Thanks bro!

[@richardata]

Nice video! I honestly cannot wait to get an e90.

[@JDCarsChannel]

Thanks man! You'll have a blast.

[@richardata]

Oh I bet! I just want to get the car badly. lol.

[@JDCarsChannel]

Ricka Ricka Which model? 328?

[@richardata]

Yeah maybe a 328 or 330. I don't really want the xDrive so that might make it a bit difficult to find especially in Mass.

[@JDCarsChannel]

I was the same way! To be honest xDrive really isn't necessary, even here in New England. All you need is a good set of snow tires and common sense. Also xDrive is more expensive to maintain and there is more power loss through the drivetrain.

[@javianjohnson8746]

Oh yea, I’m DEFINITELY doing this!! 🔥

[@milkshakeflake]

Me too... Did you?

[@brian8431]

Could you do a video just like that but instead of doing time-lapse when you get to the corners show us how you do it slowly because I think a lot of people especially me have problems with those 90-degree three-sided type corners that you get on the dashboards a lot of times, great video

[@MrKafasi]

Thanks dude. Just installed xtron now wrapping is next. Keep it coming, cheers

[@JDCarsChannel]

Glad to help!

[@MrKafasi]

Have you tried doing a aftermarket angel eyes?

[@tomasbaer9070]

Awesome, definitely way better that the shiny version. Now looks like the real thing !!!

[@JDCarsChannel]

Yeah man!

[@tanneryates732]

Thank you so much for this vid! Great content. Working on mine right now!

[@antic4mper819]

looks cool, especially with the black leather interior bmws, but with other interior colors i think i prefer the wood

[@Cocochantelle]

Really? I have the beige/tan interior and I cannot stand it. I feel like it dates the car 😅

[@johnfisher4910]

Thanks so much! This will be my next project.

[@JDCarsChannel]

Glad to help! Have fun!

[@nefibernal6113]

great video, thanks for sharing and i agree the matted one looks so much better, i wish that BMW had it as a default option

[@JDCarsChannel]

Yeah!

[@jereberry25]

do an overview of everything you've done to your car so far

[@EliteMiningSkill]

Looks so much cleaner than the gloss! I see your channel's growing too, keep it up man!

[@JDCarsChannel]

I agree, I like it much more than the gloss. Thanks for the support!

[@iiAmMango]

God that wood, I hate it so much lmao

[@JDCarsChannel]

Recreational_Shit • Hahahaha ikr

[@iiAmMango]

JD Cars hey bub by any chance you plan on smoking out your head/tail lights? You seem like you do solid work wouldn't mind getting your opinion on best way to do it without buying custom lights

[@zackw.varela4870]

Recreational_Shit • me too!!! Lmao Wrapping the trim looks 100xs better

[@Cowboy96]

Recreational_Shit • That wrap shit looks shocking if you want to change the trim (for some unknown reason) buy a new set and do it properly Ps the wood looks better anyway

[@eilbron]

Corey Lampson its 1800$ to replace the whole set on a bmw. Sounds like u never own a bmw and u just judge

[@scotmarq]

It looks awewsome, you did a great job!!

[@JDCarsChannel]

Thanks man!

[@carlmcrae119]

Great video- Ihave a Lexus gs350 with the wood look/ how much time is involved in a job like that/ Is It something a novice can do/ where do you get the vinyl

[@tjkoko2001]

im pretty new to this stuff and it took me a couple of hours to do the actual wrapping, after you do the first one it goes by pretty quick, also i went to a junk yard to take off the trim parts and it helped and sped up doing it on my actual car, all in all probably a days work, and the wrap i got on ebay, you can even buy a small sample size before u commit

[@dami18rapsodos]

How I can remove the parts from my car ?

[@johnvigil1741]

i currently have the brushed aluminum trim that I am thinking of wrapping. if there are any nicks or imperfections in the trim would they have to be filled in prior to wrapping or would the wrap mask those imperfections.

[@JDCarsChannel]

Yes

[@davidforde1973]

Looks sick Just wish I could be bothered to do mine

[@JDCarsChannel]

Go for it! Totally worth it!

[@760Kid]

Yep bet it takes all day but what an upgrade.

[@beamernz1]

Well there goes my sunday😂 awesome vid!

[@JDCarsChannel]

Hahaha well worth it! Thanks!

[@dennisnguyen7116]

@JD Cars you should paint the headliner black! Would look so much better on your black on black interior. It's easy but really time consuming.

[@JDCarsChannel]

Yeah!!! I am planning to do so this summer, it will be a big project. However my dad's BMW has the black headliner and it looks so much better!

[@dennisnguyen7116]

I agree 100% dude, it's so worth it. Makes the interior look so much classier.

[@JDCarsChannel]

For sure!

[@tjparsons3006]

Did mine today in Silver carbon, great vid

[@JDCarsChannel]

Thanks...I'm curious what that looks like. Sounds cool!

[@ccbloodcc2]

This looks really great

[@JDCarsChannel]

Thank you!

[@Explore-Gobal]

Nice demo and nice video.

[@JDCarsChannel]

Thanks!

[@PrankHouse12]

Good video man! Plan on doing this to my car!! Keep up the good work homie!

[@JDCarsChannel]

Thanks man!

[@franksilval]

Thank you... I will follow your teachings on my car....!!!....

[@JDCarsChannel]

Glad to help... good luck!

[@saq59]

Another idea for a cool mod is to upgrade the steering wheel with an BMW Z4 steering wheel it's looks awesome

[@JDCarsChannel]

Yeah that would be sweet

[@NasgulSlayer]

Great work dude! Very professional 💯

[@JDCarsChannel]

Thanks bro!

[@mw5392]

Sick, you should work on the steering wheel next

[@sebbekartellen6493]

I’m definitely doing this to my e90 tomorrow. I’m also gonna replace all interior lights with led lights

[@sebbekartellen6493]

And I’m gonna tint the windows and maybe buy some new black rims and tires.

[@JDCarsChannel]

Sweet man!

[@DeoFlascheAal]

@@sebbekartellen6493 did u finish?

[@r2gamingelite74]

Hey JD, ur video helped me a lot to do mine. Appreciate it! So how do u clean yours such as, what type of liquid is safe to use so the material doesn't tarnish and what not?

[@JDCarsChannel]

Armor All works great!

[@juliancamano4424]

😂😂😂😂”remove these nutz” 🤣🤣 gottiiii

[@allslitup]

Epic video dude, great job!

[@JDCarsChannel]

SKiTHx SKiTHx Thanks bro!

[@entekz3036]

Where did you buy the carbon fiber ? Nvm lol it’s on the description

[@maycolgomez7982]

Whats the song u use whenever u are doing all the wrapping

[@quartznation9499]

Exactly what I was looking 4 thanks

[@JDCarsChannel]

Glad to help!

[@annellapodaca4280]

Did you use low heat with the heat gun? Also, can u pls get another e90 to make cool ass vids like this again? Lol Justin Buice’s and your videos are what gave me courage to start DIYS on my car & I’ve learned way more about my car than I could imagine, good work, thank you 🙏🏼

[@JDCarsChannel]

I used low heat. Tune in this Friday for some fresh BMW content!!

[@alexbianchi15]

I love the matte apposed to the glossy

[@JDCarsChannel]

Me too!

[@paolorod]

+jd cars dude you are a pro!

[@JDCarsChannel]

Thanks dude!

[@Cocochantelle]

Does a blow dryer work as good as a heat gun or does the heat gun produce a hotter temperature?

[@JDCarsChannel]

A blow dryer can suffice but a heat gun is best

[@johnkim1656]

Could you use this wrap to cover 1/3 of the steering wheel? Not sure how to handle the seam

[@benjamindiallo3054]

Hey, Good Videos....Helped me a lot.Keep Going. Question: why didnt you leave the Vents on the cables an put them out first. i am always scared to remove Cables....😄😄

[@JDCarsChannel]

That is a good point...easier to work on the vents if it is removed I guess.

[@TheJojop98]

How much length of the vinyl did u get? For your e90 I want to do my e90 soon

[@GraffitiFart]

Qtna

[@julioviruez6150]

Looks really nice man. I have been watching your videos... since we have a lot of free time on our hands right now I might go ahead and cover the trims on my E92. Any tips or do you recommend doing something so it will come out as good as yours?

[@JDCarsChannel]

Thanks man! Go for it! Just go slow, take your time, and only apply heat when you need to. The material is quite forgiving.

[@Ecxsy]

Great video! ceep up the good work... gona try the same thing ;)

[@JDCarsChannel]

Thanks man, good luck!

[@markezbok7101]

What size roll would I need to complete this on my e90? Good tutorial btw.

[@JDCarsChannel]

Mark Ezbok I would suggest two 18" width rolls, I believe they come in 5 foot sections.

[@markezbok7101]

Ok. Thanks can't wait for more vids.

[@neeatukwei1]

Good work bruv

[@JDCarsChannel]

Thanks bro

[@SAPPERBRAVO]

What size vinyl did you buy to do the whole interior?

[@NeverStopLearningMan]

This is awesome. I always wanted to do this myself but had no clue what to do but now I think I can figure it out. Oh 1 question. I have a partial wood steering wheel. Is there anything I can do to wrap it or is there just no way to?

[@JDCarsChannel]

If it is a piece of trim you may be able to remove it and wrap it.

[@NeverStopLearningMan]

It's just wood with lacqur on it

[@JDCarsChannel]

Hmmm...you may be able to if you can tuck the edges under

[@arleitiss]

Great video, might do mine in white. I also want to replace my stereo and just wondering which model do you have?

[@JDCarsChannel]

Eonon GA7165... awesome stereo

[@gordonsampson319]

I love the look, am waiting on my E90, has wood finish and would like to change it like yours, can the door cover for the cigarette lighter be cover too?

[@JDCarsChannel]

Yeah of course!

[@fededea2698]

great job , very useful video ! Where did you get that ashtray trim with seat button ???

[@JDCarsChannel]

Thanks man! The links are in the ashtray video

[@ryanmeehan5624]

can u use a hair dryer as a heat gun?

[@jmarcano727]

Going to do this this weekend and was wondering what you use to clean these interior parts when your just doing your basic car wash?

[@JDCarsChannel]

Sorry for the late reply - you can use rubbing alcohol or a paint prepping agent.

[@jmarcano727]

JD Cars i described that wrong i ment after the wrap was done and installed.

[@burtonh1]

I like the vinyl that you switch to. I doesn't look glossy and cheap. Where did you get it from?

[@JDCarsChannel]

Thank you, I agree! Link in the description.

[@yarrovic]

8:49 I always get the same annoying wrinkle on the single air vent Any ideas how to prevent that? my wrap is thick too

[@JDCarsChannel]

I've found that a little bit more heat can be helpful, and patience working the material into shape

[@h3ad_tr9p]

It looks like it has texture on it does it? Also how long of a roll you think I would need to do the inside trim as well as the chrome trim around the door? I was thinking the $50 roll

[@JDCarsChannel]

Yeah it has nice texture to it. I’d say $50 is plenty!

[@matthunnell6659]

Hey man, I follow you here and have a question. . .I have burlwood, including the ashtray cover. . .yours is black? I want it to be covered like the rest of the trim, mine would look dumb with only the lid being wood. . .any ideas? what did you do, buy a black lid? Thanks and keep posting bro!

[@JDCarsChannel]

I bought a black ashtray compartment...but you could wrap it!

[@colinevans1918]

Is the wrap colour called "Dry Carbon" or "Matte Carbon"? Thanks. Great video

[@JDCarsChannel]

Not sure...link in description! Thanks!

[@amalasentell1589]

I would say it’s more glossy than dry or matte

[@notsureimsure7533]

Can i try this without taking trim apart from the car?

[@micahandme8078]

Only if you want it to look like a garbage can.

[@kevrose269]

great info.....thanks

[@JDCarsChannel]

Glad to help!

[@thewhitedominican5864]

Looks great man where did you order the rolls from?

[@JDCarsChannel]

Link in description

[@MultiSeboss]

how many meters2 of foil are needed for this ?

[@joselitogenel]

Hello can you tell me where can I order and part number if the ashtray with cigarette lighter on dash cause I will be doing the eonon as well on my radio ?

[@JDCarsChannel]

Refer to the links in my Ashtray Video!

[@davidrichardson582]

Do you mind sending me the link where you got Stereo system

[@JDCarsChannel]

All links can be found in video descriptions!

[@broken.bimmer4119]

just curious...why didnt you wrap the two plastic pieces on the steering wheel?

[@JDCarsChannel]

Difficult to remove and also I don't mind them being black.

[@broken.bimmer4119]

JD Cars ohhh i seee

[@patrickmaerean5162]

Im going to do this to my e90 but with automatic gear it will be more dificult to get off the center of the console.

[@JDCarsChannel]

Yes, but it won't be too bad

[@scotmarq]

The carbon looks sick, I want to do my 2010, 528ix, it's grey and I dont want the woodgrain, any tips on where to get the best carbon wrap, i.e. Amazon etc?

[@JDCarsChannel]

Definitely on Amazon

[@scotmarq]

Did you use 3M or Vvivid?

[@albertopopescu7848]

My trim is a bit scratched, with this still work well and look nice?

[@JDCarsChannel]

Depending on how shallow the scratches are yes!

[@tjkoko2001]

mine was slightly cracked, i ended up gettin a used trim from a junk yard and it helped me gained the experience to take off the trim without fear of breaking something more important and also wrap the trim without time pressure

[@LS2kid]

What was the original vinyl you used. The new stuff looks more like dry carbon.

[@JDCarsChannel]

LS2kid Both links are in the description

[@danutpirvan7173]

It carbon 3d or 5d?

[@alonsovico]

Yeeesss!!

[@joeyDrivez]

Does anyone know where I can find these headlights??

[@cristianponce214]

Did you use the glossy or matte carbon fiber?

[@JDCarsChannel]

Matte

[@Omar-jt2bw]

Why ditch the brushed aluminum trim it looks way better

[@jamiereddick8538]

In the into to this video, what headlights are those?

[@JDCarsChannel]

Unfortunately they are discontinued

[@williamherrera1407]

If you don't have a heat gun can you use a hair dryer?

[@JDCarsChannel]

Yes

[@Brad5161]

Wondering how to wrap a wood center console section on my BMW Z3 without removing the panels...

[@JDCarsChannel]

Great question Brad! This can be done, but it's a bit more awkward and difficult as other interior pieces will likely be in the way

[@Brad5161]

@@JDCarsChannel I haven't seen anyone do a tight bezel with no gap like there is around the switches below my climate controls: images.app.goo.gl/tkJUmQTRSNG8ehTT9 Seems like the wood edge would be exposed. Nobody locally wraps interiors, which is surprising.

[@frassb1te102]

Where can I get the radio u have in to buy?

[@JDCarsChannel]

I have links in my radio videos

[@benward2832]

I plan on wrapping my interior this week, I've got the hexagon style interior, any advice? i plan to use dark grey brushed aluminium on my e91 lci

[@JDCarsChannel]

Just take your time and be patient!

[@benward2832]

Obviously the trim isn't smooth like the wood one, I've gone for .20mm thickness hoping it will be ok!

[@JDCarsChannel]

Good luck!

[@benward2832]

It doesn't work well on the Hexagon style aluminium trim, it still shows the hexagon shape beneath the vinyl.

[@Jeremaiah95]

omG i love it

[@JDCarsChannel]

Thanks man

[@zachliem1979]

how did you remove the vents? what size bit do I need

[@JDCarsChannel]

10mm I think

[@Joakimeg]

Great video as always! BTW, I am noticing that the GA6165 is sticking out a lot. It did the same on mine, but I found out that if you file down two metal piceses that is between the player and AC unit you get it a little better in. Don't have a picture to show you what I mean.

[@JDCarsChannel]

Joakim Egeland Yeah a lot of people comment on that...it doesn't really bother me too much, but I'll try filing it down.

[@angel97687]

I just noticed it sticks out pretty bad lol and I just finished ordering it too smh ahaha

[@piotrpotrzebny]

You should say what to do to avoid this imperfections at 8:47 or 8:52.

[@JDCarsChannel]

New wrapping vid dropping this week

[@rlin700]

What vinyl did you use?

[@JDCarsChannel]

Vvivid vinyl

[@aadamlaher2509]

Where did u get your lights from

[@JDCarsChannel]

Amazon.. they’re now discontinued

[@fcgomes777]

How did u get you’re headlights to not be orange on the side I think it’s so ugly and want to paint it anyone know how ?

[@JDCarsChannel]

Have MyBimmerBrain code them out

[@maryamchochana]

what were the dimensions for the wrap when you ordered it??

[@JDCarsChannel]

I believe it was 12" x 60"

[@Kellionaire]

How much wrap do you need to wrap all of the trim pieces

[@JDCarsChannel]

I used two rolls.

[@leefay8647]

anyone knows where I could wrap my car Interior Trim in SF or Oakland ?

[@tdotgirlsammygirlcomeup9329]

You did a really good job eh

[@JDCarsChannel]

Thanks bro

[@senolis100]

how much carbon do you need, wrap f10 bmw ?

[@JDCarsChannel]

I would recommend a 2x6 foot sheet at least

[@jonscottcuts]

Wouldn't it be easier just to do the wrap while the equipment is still on the car?

[@JDCarsChannel]

Some would argue yes, but it's easier to get behind tricky edges when removing the trim

[@antonioluna7322]

I️ live in mass, if I️ pay you could you do this exact same job on a bmw 325i? Making sure all the vinyl goes in the same direction?

[@JDCarsChannel]

Yeah that would be cool! Shoot me a personal message if you'd like to arrange that.