#howto

[@akmaldawson5187]

Good 👍 job

[@lionsgate6727]

Nice Thank you....straight to the point. I love it! 💯

[@putigtiilblock]

❤❤❤

[@Fuzzerk]

What version of their cable did you buy? I have the same nibbi cable I believe 46in and I think it’s too long. I saw they sell like a 36in one. Is that this one? Out of no where when I giving throttle the bike will die. Thinking the cable is too long? With the stock cable set up there was zero issues. But the stock cable isn’t long enough for the Nibbi throttle tube.

[@MikeBeatzcom]

Great video!

[@anglegrinder4630]

Do you hook up the throttle handle first?and what makes it do the snap back,at what step?

[@anythinggarage]

@anglegrinder4630 the throttle cable is what's pulling the slide up. The spring is what's bringing the slide back down. If you let go of the twist throttle fast, it makes a snap cause basically the metal slide is "sliding" down fast. Makes sense?

[@anythinggarage]

@@anglegrinder4630 I have a separate shorts video on how to do the twist throttle on the handle bars. You'll see it on my channel

[@mikeanthony8934]

Hey, I put on a new throttle cable and bike wont start. I remember there being a clear plastic piece covering the cable on the carburetor end. Do u think that's the problem?

[@anythinggarage]

What carb do you have?

[@mikeanthony8934]

@@anythinggarage MCI. It's the original carb on a 77 y,400

[@anythinggarage]

@mikeanthony8934 on an old yamaha dirt bike?

[@mikeanthony8934]

@@anythinggarage yes, it ran fine before I put the throttle cable on. As far as I can tell, it is opening and closing all the way.

[@anythinggarage]

@@mikeanthony8934 you might have a cable that's too long? You may need to see if you have to raise the throttle enough to get the slide to suck in more air. Other than that, Idk what to tell you. Could be an idle adjustment? Wish I was there

[@Mfr.pharaoh]

What cable would i use for there 26mm pe fl

[@anythinggarage]

Should be the same cable

[@lilscotty11]

What length throttle cable do I need to get for Vader?

[@anythinggarage]

104mm cable length with 12.8cm movable length. Use this link: a.co/d/4oLrwO4

[@Wickedkooll]

Uf you can cancyou show me how to connect my clear fuel lines and tubes im a super noob

[@fernandomartinez-oh7sj]

what if i lost the white washer ?

[@landen_576]

I lost mine😔

[@Johnny2Bags47]

I lost this little nipple clip or something

[@fernandomartinez-oh7sj]

so what if i lost the white circle?

[@anythinggarage]

Oh shoot that sucks.i would try to get in contact with nibbi and ask if you can purchase that part. I do now know of a universal replacement or part readily available off the top of my head.

[@fernandomartinez-oh7sj]

is it essential? @@anythinggarage

[@anythinggarage]

@fernandomartinez-oh7sj I'm sure it may work without it, but it won't be optimal. The spring load mechanism will still move the slide but may come out of wack or less too much or too little fuel in. Only way to know is to try. I would say try to find a replacement. I will look into this

[@jakegregory6222]

@@anythinggaragewhat did u find does it work without I have just lost the same part

[@jakegregory6222]

@@anythinggarageit feels like it is revving without me giving it anything

[@elliott_montg21]

I got a 212 ghost pedator engine... the carb looks very similar but i cant find the throttle cable anywhere, what cable does it use?

[@eugenejoseph6484]

You just have to find a cable with a small stop on the end of it I found one for the same engine and carb on go power sports.