FlySky FS-GT3C Setup Transmitter For Any Rc Car or Boat - How To

Welcome Everyone to a new episode of the Flysky FS-GT3C how to setup transmitter for any Rc car or Boat we while show in-depth step by step how to set up servo settings to adjust all the parameters the correct way for your car and the Flysky GT3C is doing a great job with fine tuning my RC cars they are so much more fun to drive its amazing improvement
For Sale At Banggood
Flysky fs-gt3c transmitter orange: goo.gl/QMD4vt
Flysky fs-gt3c transmitter gray: goo.gl/FSNF4M
bit.ly/FS-GR3E_...
Previous Episode (FS-GT3C Receiver Binding • Best Way To Bind FlySk...
Ps. if you are following my Rc adventures and like what we are doing and would like to help us to make vids on a daily base! Please support us by watching the vids to the End & Comment & share with your Friends We HUGELY appreciated because it is You who make these vids Possible Thank You.
all the links in the description are affiliate links
You don't have Pay extra... it's still the same old price!
It just helps to pay the channel bills... Thank you for your support :D

[@f.s.7490]

Thank you very much, it helped me alot

[@daveryan9338]

Thank you Buddy........i was stumped on Setting servo Reverse! You Answered my Question and Problem Solved........Great Video!!!

[@HowToDIYRc]

:D

[@twix92]

great video , liked the music too

[@HowToDIYRc]

thanks apriciate it

[@regularwattagemode7569]

thanks for the series. My brother has been using this controller with his BSR Berserker and the spring in his TX wheel return would somehow vibrate or shudder as it centered this was amplified by his servo making for a not so great drive. I really enjoyed your series on 1/28 scale drift, so much so I've bought the K969 and K989 with a bunch of spares, we have one running on a programmable TX with a gyro, the other pretty stock, soon will have some carpet drift footage of us trying to race together. Please checkout the adventures of my cheap RTR RC Truggy racing against the likes of a BSR Berserker and a DHK Zombie on our beautiful RC track in Tasmania Australia.

[@HowToDIYRc]

that's cool looking forward to seeing it drift on carpet mate :D

[@marshallcarson1988]

Thank you 👍

[@yinghaotan5884]

Radiolink RC6GS/RC4GS has functuon of Subsidiary ID ( ID seed), does GT3C has it? ID seed explanation from Radiolink is when boat1 still has minimal power, while using boat2 to rescue boat1 ,transmitter controls two receiver at the same time. In this case, radiolink transmitter is able to only communicate with boat2, make it easier to rescue boat1.

[@backyardr.c.channel4732]

Great setup video! Question I have is with the endpoint setup for the throttle. Should it be 100% or 120%? Is 120% throttle the same as if the vehicle came stock or are we over clocking the motor by going to 120% endpoint throttle.

[@HowToDIYRc]

good question not 100% sure with a servo you get a few extra travel degrees

[@backyardr.c.channel4732]

@@HowToDIYRc I got some other feedback saying that 120 is really equivalent to 100 so they are saying it should not matter the esc can not go over its max which is 100.

[@RCACTIONAUSTRALIA]

Good Video 😎👍🏻🇦🇺

[@HowToDIYRc]

Thanks my friend from down under love your country 😁

[@MatthewPlaysFN]

Do these controllers link to more than one reciever?

[@MatthewPlaysFN]

Did explain what trim ment ?

[@BeaversHobby]

Seems like everyone like negative EXP because it makes the car less twitchy. I too have the EXP around 20-30.

[@kristopherburkholder9366]

Will this control two steering servos?

[@HowToDIYRc]

Yes yes even more then 2 if you want too

[@iolavem]

Hi. Thank you for your explanation. But, what could I do, if steering works well, but not the Throttle forward and backward. I don't know what to do to make it work. If I change the wiring into the transmitter to CH1, throttle works meanwhile I'm moving the wheel right and left. But into the CH2, by moving the trigger, it doesn't work.

[@HowToDIYRc]

you need to edit the endpoint of channel 2 to 100% then it shut work

[@iolavem]

@@HowToDIYRc Do you mean, by pressing the trigger (as Left Forward) up to 100% and moving it to front (as Right Back) up to 100% also?

[@flightlieutenant6902]

Great 😊

[@HowToDIYRc]

thanks :D

[@mohammedeldaly5645]

Can I bind fly sky 2.4ghz 3 ch. With ansmann transmitter?

[@terrybrown3697]

I keep trying to get the motor speed the trigger to work reversed and I cannot get it to go in reverse Can you show me what I'm doing wrong

[@terrybrown3697]

I would appreciate it thank you

[@HowToDIYRc]

your esc is probley one way like rc planes and drones you need a car ore boat esc and mix the throttle 50/50 and not from 0 to 100

ia6b is compatible with gt3c?

[@alanlindner1421]

Have you connected the F3C to a computer? I get a usb driver error. Want to try VRC.

[@HowToDIYRc]

no i have never try it but if you have running a windows you can updating the USB Root Hub driver.

[@rjcorrea6640]

How many rigs can it hold in the system?

[@blablametalhead]

10 model mem

[@dontdoit6403]

How to power up

[@psykad3lic]

Will this work with a ARRMA Big Rock 3s?

[@HowToDIYRc]

This transmitter works with the teceiver showed in the vid if you built that in your car it shut work

[@cwatson42785]

Hey buddy do you know why my throttle and steering would be reversed on my flysky transmitter? I just swapped out my tactic radios to my fly sky and for some reason I have to run channel 1 and 2 reversed. The arrma motor wires are hooked up normal. Any ideas? Thanks for any help!

[@OswaldBeef]

Chris Watson just different protocol will often go other the way..flip the setting it really doesn’t matter at all as long as things are going the right way. There is no right way just the correct way for each receiver.

[@cwatson42785]

@@OswaldBeef ah I see! Thanks for helping me by explaining all that. Very much appreciated!

[@OswaldBeef]

@@cwatson42785 if ones remote does not have that option for throttle....you can always reverse the red and black brushed only motor wires to esc to flip its direction as last option.

[@HowToDIYRc]

thx oswalds for helping people respect :D:D:D

[@JacksgapKIMHO]

27mhz Fs gt3-c!!!!

[@HowToDIYRc]

Oh really let me check

[@idronecharpifpv89]

Annnnndddd you did not explain ABS that is the reason I came to the video! Lol

[@mydc2200]

I burned my receiver, shit

[@HowToDIYRc]

that sucks

[@TheFifeLife-AustralianCa-zq1oi]

SLOW DOWN !!!! FFS

[@alanlindner1421]

Have you connected the F3C to a computer? I get a usb driver error. Want to try VRC.