HP 6830 CISS Youtube

[@piterbrau265]

friend it was me who managed to put ciss on this model of printer and a partner of mine who gave the idea of ​​putting string inside the cartridge, well the only thing you can’t do is put the ink paths in the cartridge because it will move it then put it in print affection gets better

[@refillhouse]

The internal structure of the original ink cartridge, please search the US Patent Document No. US009452609. from USPTO, we will find the internal structure of the HP 934/935 SETUP, 934/935 Standard, 934XL/935 XL ink cartridges is different, and each type of ink cartridge is modified differently. According to the type of ink cartridge, when filling the ink cartridge, you need to select the correct filling tool. Fill your ink cartridges effectively. To modify the type of ink cartridge for continuous ink supply, it is recommended to use setup or standard ink cartridge. We modify the ink cartridge use setup ink cartridges and other types of ink cartridges are modified using the same method. Use a hand drill to drill a 4 mm round hole, and slowly implant the appropriate length of cotton thread the interior of the chamber, after the space of the chambers body is filled with the cotton thread, the cotton thread can absorb the ink, and can effectively balance the pressure generated when the printer head moves. In order to facilitate the removal of the ink cartridge, we fixed the four separate ink cartridges into one; The position of the ink tube installation provides more space for the ink tube; We removed the printer-head, modified the forbidden part, and reduced the improvement of the internal pressure balance of the printer head. Above the ink bottle, we install a set of pressure balancing devices that can balance the pressure between the atmosphere and the system; and provide a system for ink filling and maintenance.

[@luisvito9966]

Does this method work with non-original cartridges?

[@piterbrau265]

the hoses on the side with time will make the effort down in the solution was to put the hose in the same shape as epson

[@yakupkayahan7422]

Kartuşların içine doldurduğunuz ip pamuklu ip mi? Yoksa özel bir ip mi? Doldurulan ip miktarı ne kadar olmalı? Yardımcı olursanız sevinirim.

[@ibrahimwere8167]

hi, can i order hp 7612 CISS from your website? For 933xl and 932xl cartridges

[@DAN9I]

0:24 мммммммм очень понятно как демонтировать защёлку Упд: на видео он тянет отвёрткой на себя, ни в коем случае не в бок, у меня оч плотно сидела, боялся сломать, я получается давил на кончик этого крючка, тогда защёлка норм вытащилась

[@wayoca]

这个插到墨水瓶上的组件是单向阀吗？弹簧压力是多少的？打印机打印时墨水流动产生的力量应该是微小的

[@refillhouse]

微壓空氣單向閥 蠕動閥

[@wayoca]

@@refillhouse 这个工作是这样的：打印机打印时，蠕动阀是通过打印机墨水的流向力量自动开启的，打印机静止时阀是常闭的

[@refillhouse]

是的. 另一個功能: 可以插入注射筒內的墨水經由供墨管到墨水匣內,進行供墨系統失衡時的維護 ( 沒有壬何供墨系統不會故障或失衡)

[@wayoca]

@@refillhouse 是的

[@betaalyt3809]

In this vedio why did you open the print head

[@refillhouse]

Modify the print head

[@betaalyt3809]

@@refillhouse what modification? I can't understand

[@refillhouse]

The Original Printer-Head Design, please search the US Patent Document No. US008684505 from USPTO, The structure of the original nozzle group that we have been neglecting. After the ink cartridge is manually filled and loaded into the support structure 50 of the printer, the printing nozzle is cleaned twice or more, and an abnormal test page still appears. The main reason is that the ink cartridge is mounted on the position of the annular seal 44 of the support structure 50, especially the air hole 62 under the annular seal 44, and the atmosphere is communicated downward and outward, causing the ink cartridge to clean the nozzle. It will introduce some outside air into the air hole 62. When the ink cartridge is manually filled with ink, a large number of air bubbles remain in the ink container 22, which may be caused by poor filling tools or techniques. There will be a lot of bubbles in the nozzle and it will not print properly; you need to pay attention to the filling speed of the ink or choose the correct filling tool. The ink container 22 installed on the upper portion of the support structure 50, if the negative pressure of the ink supply is too large when the nozzle cleaning operation is performed, the negative pressure guides the air of the vent path 14 below the annular seal 44 into the ink hole 58 in the center of the support structure 50, and the nozzle may have a large number of bubbles, which cannot be printed normally. If the printer is modified to CISS, the negative pressure generated by the nozzle guides the ink from the ink container 22, into the ink hole 58 in the center of the inlet tower 40, finally guides the ink into the nozzle. The modified printer adds an ink tube above the ink cartridge to an ink supply system for the external device. The ink supply from the external ink bottle to the nozzle increases the negative pressure inside the ink cartridge. If the ink of the external ink bottle cannot be synchronously introduced into the wick 96 of the ink container 22, it enters the central ink hole 58 and the nozzle position; instead, a large amount of air is introduced into the ink hole 58 in the center of the support structure 50. The negative pressure generated by the cleaning of the printer, in the case where the ink supply system cannot supply the ink immediately, the negative pressure directly introduces air from the air hole 62 below the annular seal 44, and the air enters the ink hole 58 of the center inlet tower 40 of the support structure 50 again；the print quality is problematic.

[@betaalyt3809]

@@refillhouse Thank you so much sir for your help

[@betaalyt3809]

@@refillhouse can send me the link of the patent Document