hp all in one 24 ram upgrade || how to upgrade the ram in HP AIO 24 | HP AIO 24-DP0002ne RAM Upgrade

[@davearnold731]

Great job on this video. THANK YOU SO VERY MUCH. I thought for certain I would crack the screen but I pull outward on the plastic around the bottom and sides and it finally came apart. WHOO HOO, new 512 m.2 and 16GB ram upgraded. Very happy with it, so much faster than brand new.

[@nprstechandvlogs8793]

You welcome 🙂please subscribe 😊

[@jessetwilliams1156]

Thank you for this video tutorial. I upgraded mine to 32 GB. That is the maximum mine will support. I do photo editing on mine, so the 32 GB will help a lot better. It came stocked with 6 GB. It seemed as if the computer always got louder under heavy use. Now, this doesn't seem to be the case. Only time will tell. Great video!

[@nprstechandvlogs8793]

Thanks for the message.

[@d0gechan]

can i ask where you got the ram module? im not very sure where to search, thanks.

[@mikewingert4317]

Great Video Immensely helpful .... Well Done!!😀

[@nprstechandvlogs8793]

You welcome 🙏

[@germart44]

Thanks You. Congratularions, from Bogota Colombia, a Hug.

[@AlexandraAbovyan]

Do I need to buy Crucial RAM for a desktop or laptop for this model?

[@nprstechandvlogs8793]

Laptop model

[@AlexandraAbovyan]

@@nprstechandvlogs8793 Thank you!

[@singerman64]

Great video. I got my RAM upgrades installed, but when I put the AIO back together, it won't power up. When I removed the screen from the chassis, I accidentally pulled the ribbon cable from the back of the screen to the motherboard out of its socket. I hadn't even noticed which way it was inserted into the socket, and it's very cheap flimsy ribbon cable with blue tape on one side of the contacts and copper contacts visible on the other side. Unfortunately, it doesn't matter how I try to reattach it, the power still stays off. No light on the back by the power cord, and no LED when the on-off switch is pressed. Do I now have a boat anchor with new memory in it, or is there some way to fix this? Help!

[@nprstechandvlogs8793]

Thanks for the comment.. sir, first check the memory is supporting or not check with your old memory if pc is ON. There is no problem with the pc. If not, getting ON check with HDMI OUT or IN your PC with Hdmi cable. Still No display you need check with any service centre. Thanks 😊

[@XBnPC]

Same process for AMD Ryzen powered systems I assume?

[@luismario525]

Can you do a video on changing the cpu on this computer ?

[@nini2ka]

Hello can I use use your tutorial on my HP All-in-One 24-f0xx ?

[@RandyReviews1990]

did you put the 2 rams on top of each other i have the same pc!

[@nprstechandvlogs8793]

This 10th processor model have 2 memory slots --DDR-4

[@Void-Temmie]

im having trouble taking off the screen, any tips

[@nprstechandvlogs8793]

The top screen frame needs to be removed (slowly)

[@RandyReviews1990]

can i use a Phillips screwdriver or Flathead screwdriver to pick up the screen?

[@nprstechandvlogs8793]

Used the plastic spudger, and metal spudger &ultra-thin opening tool

[@AdrianGarcia-wl6ij]

Does anyone know if eco means less efficient or better efficiently also does anyone know if this PC will support DDR5

[@nprstechandvlogs8793]

Ddr5 memory doesn't support it (it won't fit)

[@Limicky]

Can a inexperianced person do this while watching this tutorial and if so do you think it workd the same as hp dp-0224

[@viscscrup779]

Mere ko bhi karwana hai .. same model hp PC ... Kidhar bhejna hai PC?

[@sudasatoshi9769]

There is a metal cover over where the ram is for you, everything else looks the same. There are no screws for it that I can see. How do you remove it?

[@nprstechandvlogs8793]

Memory slots doesn't have any screws. I think you saw the metal cover on the m.2 SSD. There is small screws for m.2 sad.☺

[@sudasatoshi9769]

@@nprstechandvlogs8793 Thanks, I just had to give it a bit of force lol

[@user-bw4xd]

I have ddr4-2666/16gb. can i upgrade ram 16gb ddr4-2666?

[@nprstechandvlogs8793]

i think this process doesn't support 2666mhz

[@NOTGH_ST]

be extra careful removing the panel it is secured very firmly try to use a wider spudger if possible and work at the adhesive before attempting to seperate from the body.

[@rahul104]

All in one pc me daul core motherboard hata ke i3 wala motherboard lag skta hai kya

[@nprstechandvlogs8793]

No

[@rahul104]

@@nprstechandvlogs8793 fir kya krna pdega i3 lagwana hai mujhe

[@sarajlija314]

I tried installing extra ram into this computer. I was able to get everything in place fine but when I turned it I can hear the fan spinning but the screen stays black. Tried the hard reset by unplugging it and holding power button but no luck. Do you know what the issue could be? It powers on but the screen stays black. Any advice is appreciated.

[@nprstechandvlogs8793]

Maybe the memory is not supported

[@sarajlija314]

@@nprstechandvlogs8793 it's the same ddr4 memory card I had inside. I took it out and put the old one in by itself it still has a black screen. Strange. Its a brand new computer too

[@nprstechandvlogs8793]

@@sarajlija314 check with HDMI cable connect with any laptop or connect any monitor. So you can find out display issue or motherboard issue. If this doesn't work check with server center.

[@sarajlija314]

@@nprstechandvlogs8793 I disconnected the hdmi and plugged it back in as well as the power cable into the motherboard and its back up and running. One of those were unplugged I guess. Thanks for the help

[@nprstechandvlogs8793]

@@sarajlija314 ok. Please subscribe to my channel 🙂

[@Joseph-ke1gb]

i have a question, my all in one says it only has one port for ram, ive been scared to open it to check, that means im stuck with 4gb ram? or can i stick another 4 gb of ram or even two 8gb of ram

[@nprstechandvlogs8793]

you can use 8GB also if same Megahertz

[@BLOODWOLF-zd4km]

Can we not change the cpu to anything better

[@nprstechandvlogs8793]

No

[@questionablesutff8712]

Hey.can i insert the long ram sticks or no

[@nprstechandvlogs8793]

No, Only the small one (ddr-4)

[@questionablesutff8712]

Ok thx

[@questionablesutff8712]

Oh thx theb

[@angellorraine3522]

@@questionablesutff8712 bruh I see you commented to the videos how to upgrade 😌😂

[@questionablesutff8712]

Shhhhh

[@gaston8512]

Great thanks!

[@nprstechandvlogs8793]

Please subscribe to my channel.

[@saffron4441]

Is this install the same for an HP AMD Ryzen 5?

[@nprstechandvlogs8793]

Yes

[@asrilgaming21]

Is there room for a VGA RTX 3060?

[@nprstechandvlogs8793]

No, we can't upgrade GPU in all in one.

[@hamonlol]

Nice video, can you list the tools used in here though? Thanks 🙏

[@nprstechandvlogs8793]

IFIXIT OPENING TOOL AND METAL OPENERS, Screwdriver

[@MRXNeoYT]

Can i have a home made alternative to the opener

[@Gamer4lifeRedrayinc]

@@MRXNeoYTbutter knife is what I use for the opening tool

[@hamonlol]

@@Gamer4lifeRedrayinc did it work with that? I remember trying it months ago with my brother and friends but we couldn't get it to open, probably because we weren't persistent enough lol

[@fabymarsalek5256]

Thank you so MUCH!

[@nprstechandvlogs8793]

please subscribe to my channel

[@shtivb2263]

Thank you!!!

[@nprstechandvlogs8793]

Please subscribe to my channel ☺

[@alexanderky9684]

Where i can see the max ram I can upgrade ?

[@d0gechan]

your system proccessor thingie, if it says x32 then thats ur max, if its x64 then thats your max.

[@Void-Temmie]

What is the compatible ram?

[@nprstechandvlogs8793]

Ddr4 3200mhz

[@Void-Temmie]

Is it easy or hard

[@nprstechandvlogs8793]

Hard, you need to use proper tools..

[@Void-Temmie]

One more thing, I am having trouble taking off the screen, any tips?

[@sergiocatholicking1609]

Ed df

[@nuttawut3798]

That ram is the same as laptop ram