HP CP3525 M533 M552 M252 CM4540 508A: REFILL TONER CARTRIDGE

How to remanufacture toner cartridge for use in HP Color LaserJet CP3525 CE250A CE250X CE251A CE253A CE252A CF360A M252dw M252n M277dw, M277n CP4025 CP4525 CF400 CF401 CF402 CF403 CE260A CE260X CE261A CE263A CE262A M533 M552 M575 M577 M551 ENTERPRISE 500 M570 CE400A CE401A CE403A CE402A 507A M651 CF330X CF331A CF332A CF333A CM4540 CE264A CF031A CF032A CF033A, CANON Y-SENSYS 7780CX 7750CDN
CE25X, CE40X and CE26X CF33X CF03X and Canon toner cartridges are different but the remanufacturing instructions are the same.
CARTRIDGES USED IN HP CP3525 series
CE250A (Black) 5000 pages
CE250X (Black HY) 10500 pages
CE251A (Cyan) 7000 pages
CE253A (Magenta) 7000 pages
CE252A (Yellow) 7000 pages
CARTRIDGES USED IN HP CP4025 series
CE260A (Black) 8500 pages
CE260X (Black High Yeld) 17000 pages (4525 models only)
CE261A (Cyan) 11000 pages
CE263A (Magenta) 11000 pages
CE262A (Yellow) 11000 pages
CARTRIDGES USED IN HP M551 series (507A)
CE400A (Black) 5500 pages
CE400X (Black) 11000 pages
CE401A (Cyan) 6000 pages
CE403A (Magenta) 6000 pages
CE402A (Yellow) 6000 pages
What you need:
Toner (CE26X -- CE400X: 140 grams for the black, 145 grams for the colors -- CE26X: 210 grams for the black, 260 grams for the colors)
Chip
Drum
These printers can print in color or in black only modes. To print in black mode, the printer disengages the developer rollers in cyan magenta and yellow cartridges.
The image is transferred from the toner cartridge drum directly to the Image Transfer Belt. This process is repeated for each color cartridge in this order: Yellow, Magenta, Cyan, Black.
TEST PRINT:
- Print Quality Test Pages:
1. Press MENU/HOME button.
2. Press down arrow until DIAGNOSTICS or COLOR BAND TEST appears on the display.
3. Press OK.
4. Press down arrow until PQ TROUBLESHOTING or PRINT TEST PAGE appears on the display.
5. Press OK.
6. now a series of pages will print out allowing you to see if all cartridges are printing correctly.
TEST PRINT HP 551 series:
1. Press HOME button.
2. Press down arrow until ADMINISTRATION appears on the display.
3. Press REPORTS MENU
4. Press down arrow until CONFIGURATION, SUPPLIES STATUS PAGE, MENU MAP, DEMO PAGE, RBG/CMYK SAMPLES, or one of the font list, appears on the display.
5. Press OK.
REPETITIVE DEFECTS HP 3525 M551 SERIES
Drum (cartridge) 76.00 mm
Charge roller (cartridge) 27.00 mm
Developer roller (cartridge) 32.00 mm
Primary transfer roller 44.00 mm
RS roller 49.00 mm
Secondary transfer roller 50.00 mm
Secondary transfer backing roller 63.00 mm
Image Transfer Belt drive roller 76.00 mm
Fuser sleeve 77.00 mm
Fuser pressure roller 78.00 mm
REPETITIVE DEFECTS HP 4025 SERIES
Drum (cartridge) 76.00 mm
Charge roller (cartridge) 27.00 mm
Developer roller (cartridge) 32.00 mm
Primary transfer roller 51.00 mm
Feed roller 48.00 mm
Secondary transfer roller 44.00 mm
Secondary transfer backing roller 63.00 mm
Fuser sleeve 76.00 mm
Fuser pressure roller 80.00 mm
PRINTER ERROR MESSAGES HP 3025 SERIES
10.32.00 "Unauthorized Supply in Use" the cartridge is a non oem HP cartridge.
10.90.XY "Replace Color Cartridge"
XY 00: Black
01: Cyan
02: Magenta
03: Yellow
10: Missing cartridge chip
10.92 "Cartridge Not Engaged" the front door is opened. Open and close the front door to clear the message.
10.XX.YY "Supply Memory Error" toner cartridge or cartridge chip is bad or missing.
XX 00: Memory tag error
10: Memory tag missing
YY 00: Black
01: Cyan
02: Magenta
03: Yellow
PRINTER ERROR MESSAGES HP4025 SERIES
10.41.00 Unsupported supply is installed. toner cartridge is not HP cartridge.
10.XX.YY Supply memory error. Toner cartridge or cartridge chip is bad or missing.
XX 00: Memory tag error
10: Memory tag missing
YY 00: Black
01: Cyan
02: Magenta
03: Yellow
48.01 Transfer unit error. Transfer belt has dislocated during printing.
50.1 Fuser error. The temperature of the fuser is low
50.2 Fuser error. Failure during fuser warm up
50.3 Fuser error. The temperature of the fuser is too much high
51.XY Error
51.20 Black laser error
51.21 Cyan laser error
51.22 Magenta laser error
51.23 Yellow laser error
PRINTER ERROR MESSAGES HP M551 SERIES
10.XX.34: Used supply in use
00: Black
01: Cyan
02: Magenta
03: Yellow
10.XX.34: Wrong cartridge in color slot
00: Black
01: Cyan
02: Magenta
03: Yellow
10.XX.YY Supply memory error, toner cartridge missing, cartridge chip missing or bad
XX = 00: memory tag error 10: memory tag missing
YY = 00: Black 01: Cyan 02: Magenta 03: Yellow
-----------------------------------------------
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)
www.linkaccesso...
email: [e-mail]
other links:
www.emmegiricam...
-------------------------------------------------------------------------

[@sukowinoto1836]

terima kasih dengan video ini pengetahuan saya lebih banyak lagi. saya akan menunggu vedio yang lain.

[@maidsandmuses]

Note to those following this tutorial for the *508A* cartridges for the HP M552 & M553 printers: HP have redesigned the cartridge. The tutorial is still mostly relevant, but there are a few differences: 1) there are now two springs on top, and no spring underneath. 2) there is no longer a lever to move to the side in order to separate the two halves (toner & waste units). 3) the charge roller in the waste unit is now not so easy to remove, it has a new holder & spring-loaded bearing design. The bearing on the contact side is VERY fragile; don't try to remove it; it will snap in two as it is made of a conductive brittle black plastic. 4) the gear set is a little different, just make notes of which gears go where, and leave the big gear attached as per the instruction in this video. 5) removal of the developer roller is now different. The end cap on the *contact* side needs to be removed first, with the few white plastic transmission parts. Then another cap underneath that (again on the *contact* side) needs to be pulled off to free the developer roller, but it is held in place by one heat-fused plastic pin. Drill 2-3mm into the centre of this pin to release the end cap holding the developer roller in place. 6) the contacts on the contact side are now made of a conductive black plastic, and are less easy to identify as such. This cartridge has a major design flaw: if the printer is only used sporadically and turned on/off very frequently, the waste collection unit of the cartridge will fill up before enough toner is used. The waste collection chamber will then start to overflow, not only dumping toner inside the printer but also on top of the charge roller contact spring. The charge roller then fails to apply a charge to the imaging drum, which means the imaging drum will start to pick up A LOT more of the toner and dump that straight down the centre of the cartridge onto the scanner & lens units, making the problem very much worse. If these 508A toner cartridges all of a sudden start dumping loads of toner, possibly the waste collection chamber is full and the spilled toner has compromised the electrical contact of the charge roller contact spring. I am currently reconditioning my HP M552 printer that developed this problem; I will report in a few days time if following the above instructions, emptying the waste chamber, and cleaning the charge roller contact spring has worked. But first I also need to disassemble the printer and remove the transfer belt unit and scanner unit for cleaning; so it will take a bit of time...

[@maidsandmuses]

Update: unfortunately it didn't work. The magenta and cyan cartridges are still dumping loads of toner down the sides; it looks like there is a problem with the doctor blade seal on the sides. These are the original OEM cartridges the printer came with, but they are now 8 years old. As a result of us only printing one or two pages every now and then, this printer has run a relatively large number of calibration and cleaning cycles relative to actual print cycles (that happens every time you turn it on, can't switch that off). This probably has taken its toll on the mechanical parts of the cartridges, but it also looks like the toner itself may be getting too old. Time for a new printer as HP have dropped support for Apple MacOS and no longer provide drivers (Apple's own Airprint is totally inadequate in its colour management, it doesn't know/care about any printer profiles and colour accuracy is _garbage_ ).

[@ingvarsigurdsson1069]

Very helpful video, thank you :)

[@susiononono1881]

Wan to ask me the contens of 100ml toner how come you only printed 100 pieces why mr.just print normal text using a4

[@ahmedmoawad9427]

good job thank you

[@pedro_bezerra]

bom vídeo, obrigado por compartilhá-lo

[@EminVarol]

:)HP CP4025 TONER . THANK YOU.

[@Electronicview]

good job. thank you

[@hathakker802]

Hello. I have an hp color laserjet mfp m182n printer. I want to ask you that what is diagnostics page, and how to interpret it, what does the different color bands show? What do they mean?

[@viandant5]

They are used for the calibration. If the lines are not right you have to make a calibration procedure.

[@harryukraine]

So I need 140 grams of color for the CE400X models? Where can I buy the colors? On one website, they sold kits with 40 grams of color.

[@viandant5]

You can buy 3 bottles, or try Uninet or Delacamp, they have that bottles. However most of the HP color toner powder will work

[@sreekanthsannilla7397]

very good video

[@GeorgeDavos]

can i refill with 1215/2025 toner or it has his own toner?

[@viandant5]

333video1 yes, you can use that toner

[@susiononono1881]

For an hp LaserJet 522n printer or 307a cartridge how many grams is it in thank

[@viandant5]

145 grams for the color and 210 for the black

[@mrmatoria7376]

Where can I get rest chip for HP laserjet CP 5225 cartridge???

[@viandant5]

Try Uninet Imaging, or Delacamp

[@ahmedsholeh4073]

please share video about refill toner for hp m533 printer, thanks

[@viandant5]

You can use this instructions

[@svetlanashevchenko975]

hI! How to find out how much toner to put for a certain hp model? we have kyocera ecosys p6021cdn

[@viandant5]

it take 70 grams of toner

[@herowang8864]

Im a factory for this toner cartridge , here is my web szjingyuan.onesite.alibaba.com/ ! if you need it please contact with me and added my whatsapp [phone] , my email is [e-mail] , hopefully have a chance cooperating with you Regards Hero

[@Obaigwa]

Can I use the same procedure on M577 cataridge?

[@viandant5]

Yes

[@crisseven3537]

this way can same if i refill my toner Printer HP 4100 laser jet? i was trouble with refill toner

[@viandant5]

+cris seven no, the refill instructions are different, the cartridge is the same as hp4000

[@crisseven3537]

+viandant5 oke thanks for the info. nice share buddy 😊

[@herowang8864]

Im a factory for this toner cartridge , here is my web szjingyuan.onesite.alibaba.com/ ! if you need it please contact with me and added my whatsapp [phone] , my email is [e-mail] , hopefully have a chance cooperating with you Regards Hero

[@sekhartechupdates]

after refilling , print coming like half of the page is black.. which part i need to replace ?

[@viandant5]

Is the spring correctly inserted? there is the over the developer roller? If not the developer roller blade may be defective. But I think there is a component out of position, try disassemble and reassemble the cartridge again

[@sekhartechupdates]

yes i did that its working thank you

[@prashantkorke9156]

hi sir . 18A toner cartridge refilling but chip is not available , can this toner cartridge is run old chip?

[@viandant5]

Yes, it could works

[@herowang8864]

Im a factory for this toner cartridge , here is my web szjingyuan.onesite.alibaba.com/ ! if you need it please contact with me and added my whatsapp [phone] , my email is [e-mail] , hopefully have a chance cooperating with you Regards Hero

[@harryukraine]

What do you use for lubrication?

[@viandant5]

Lubrication of what?

[@harryukraine]

@@viandant5 the rollers or what it's called.

[@viandant5]

@@harryukraine You mean the OPC drum? you can use toner powder

[@iboroffor9031]

Must I buy a chip...can't use the old one?

[@viandant5]

Yes but you'll have an error message

[@iboroffor9031]

@@viandant5 Wow, I'm so grateful! I didn't expect a reply since the video was uploaded so long ago. Where and how do I get a new chip for HP Color LaserJet CP4525 printer in Nigeria, please. Thank you again...

[@viandant5]

@@iboroffor9031 Try Delacamp or Uninet Imaging, or Alibaba. Avoid ebay

[@iboroffor9031]

Thank you so much again. For CE260A toner, how many grams of cartridge is required please?

[@viandant5]

@@iboroffor9031 250 grams

[@eatef78]

we don't need to reset sensor for this tone ?

[@viandant5]

there is a chip

[@eatef78]

+viandant5 we need?

[@viandant5]

yes

[@stefan1954ify]

Where do you buy the refill toner for this cartridge?

[@viandant5]

+Jean Nelson on ebay I think you can buy that toner, but you can use HP1215 toner too. or use google

[@upilsekilo8641]

how to calibrate it??

[@viandant5]

kzbin.info/www/bejne/qqm5npqef8uDr7s

[@LiaqatAli-sv1zx]

no LaserJet m651

[@viandant5]

+Liaqat Ali yes, also for HP m651

[@darlenekoopmans1439]

What kind of video's was that!!!!!!!!!!!!! ¡!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!m!!!!!!!!!!!!!!!!!!!!!!!