HP Designjet T770 T1200 Belt Replacement

[@ibrahimosman7835]

I appreciate the camera man following you to show everything you say 👍. Great video, thank you

[@maidonopoulos]

On left cover there is a hiden screw behind . You must unscrew the rear plastic bar and find the hiden screw of left cover.

[@stainlessernst]

You are the best Bob ! greeetings from Bavaria (Germany)

[@irandoosti]

Thank you very much, I hope you your fully healthy wealthy and happy for ever after. Your videos are life changing. 🙏💐🌹😊💖

[@soop82]

May you live long and prosper, sir! Thank you (and your cameraman)!

[@LPSshowsyouhow]

You're quite welcome!

[@robertdavis5714]

Have a T930, somewhat similar, enough to see what to do with changing left side pulley which has failed on mine, seems to be a common issue on this unit after long conversation with HP Tech.

[@michelgiustina1124]

Hello, Very interesting video. I was given a T770 plotter, which worked perfectly, and following a move and an 8-month shutdown, the start-up sequence blocked at 58% and led III, next to the network socket, flashed. From what I read from the documentation it is possible that the electronic module is broken. Can you help me with troubleshooting or point out specific items to test. I have some knowledge in electronics. Thank you

[@glendagovan4877]

Do you have a kit and instructions for the old encadena 1500TX digital textile system.

[@glendagovan4877]

Encad 1500TX

[@martinfranciscopalominoenr4450]

hi. we have a problem whit an HP T 1300PS. initially, it showed the error 08:11, we change HDD and formatter, aftert this the error 59.3:00 started to appear and we have not been able to get it out of here

[@marcioclaro6838]

GRATITUDE YOUR VIDEO HELPED ME A LOT. THANK YOU VERY MUCH

[@RodrigoCervantes-d3z]

How can I get the clip separately?

[@danielramirezcruz9811]

Hi Bob, sorry, my hp designjet 800 plotter won't turn on, it just turns on the power button, it stays green and then the green light starts blinking, but the plotter does absolutely nothing. what will happen?. Greetings Bob!

[@LPSshowsyouhow]

Hi Daniel, It sounds like that machine needs a new power supply.

[@danielramirezcruz9811]

@@LPSshowsyouhow Hi Bob...thanks for replying, apparently it is the power supply, where can I get it?...Greetings !

[@taherzoma3091]

thank you

[@Ralpha1961]

Your web page links to this as a t2300 belt replacement. Is this machine comparable?

[@LPSshowsyouhow]

They are very similar to the T770/T1200 printer. You shouldn't have any trouble replacing the belt on a T2300 if you follow this video.

[@TheChristroyes]

Hi , since I've changed the Belt , I've got a 21:11 défault ? Do you know what's the problem ? Thanks

[@LPSshowsyouhow]

A 21:11 error is coming from the service station, probably the priming motor or priming motor sensor. The sensor is mounted on the extreme right end of the service station and is held in place by its leads. If it got bumped during the belt replacement it will cause the error. Check that it is square with the little encoder wheel that goes through it. If not, bend it into place.

[@TheChristroyes]

I was wrong topic, my problem is on an HP designjet 800 .. is it the same cause? Regards

[@TheChristroyes]

@@LPSshowsyouhow Thanks , I wil check it . will keep you informed Regards

[@LPSshowsyouhow]

At 21:11 error is a service station error. Try running diagnostics on the plotter and run the SS test.

[@rebeccascott2490]

Help I got a printer head replacement incomplete how to fix this

[@hassanal-hasnawy5746]

thank you so much!!!!!!

[@LPSshowsyouhow]

Glad we could help!

[@عبدالحليمالمظفر]

Thanks alot

[@evangelionpoptarts4571]

Been watching your vids for w while now to help me with my printers but you sound kind of depressed in this vid my man, you doing alright my dude?