HP EliteBook 830 G5\G6 Screen Replacement

Learn how to remove and replace the display bezel on HP EliteBook 830 G5\G6 Notebook

[@blrod809909]

Thanks your way is so much easier than the hp clips

[@Patrick2200]

Is 840g6 notebook equipped with sure view LCD compitablele with normal TFT panel? I want to change it , too.

[@zolizz6622]

Is the G6 screen compatible with G5 screen? (I've found a 400 nit good screen, but it is to G6 in the description, and I have G5)

[@natebolton9385]

Where did you get the display with the brackets attached? I can source them without but it's finicky to pull them off the bad display

[@gpckoleco]

Usually I find parts like that from Ali Express. Amazon sometimes has the same store reseller . But never been shaded or got the wrong product from AliExpress. Just make sure you order the right thing :)

[@vegfed]

befofe take off the panel ... should i disconnect the battery first?..or its the same anyway? , the final result will be ok as you show us?

[@akusemkhal]

What connector does this laptop use

[@mentiseaglekeeper7876]

where can i buy a screen for Elitebook 830 G6

[@2011Kestrel]

Anyone know if you can swap out the Sureview display with a non-Sureview display in this laptop? The Sureview display is the worst display I’ve ever encountered, and it makes using my laptop a very poor experience.

[@Jacob-nk6yf]

No, you can't.

[@rahulsalian3772]

What's the price for display replacement??

[@vigilance4749]

Im having the hardest time getting the bottom part of the plastic border to go back in. I dont understand it. 😔

[@tonkabb]

At 6:30 in the video, you can see he pops the silver bar below the bezel out. Set the bezel around the screen, then pop the bar over the bezel small clips.

[@bowtiethirteentwenty8627]

What is he doing @ 6:30? Is that a form of cable tucking? Thank you.

[@maxeggenhuizen7883]

Kind of late response.. But maybe others are wondering. Today i replaced a second one. He is unclipping the clips of that grey thing in the middle, when u put the black bezel back then u need to push down that "gray thing" and push it towards the screen so it clicks back in. It is really a shitty job. U can see at the end of the video on the right side 2 clips are still visible. Not good.

[@wespin6875]

what was wrong with yours? looks ok.

[@jimsmith5841]

my bezel isnt that loose fitting - have you removed it before?

[@gpckoleco]

I'm going to assume yes. I just took one apart and it was a little tougher than that one looked. Also there was some adhesive. Take your time with a good spludger tool , it'll be alright. :)

[@devendrazope1935]

How much is price of this display, i have g6 and display broken. Want to replace

[@binoyjohn1113]

i'd like to know as well. please let me know if you found out. thanks

[@wallysemenoff8110]

You were supposed to disconnect the battery before removing the screen

[@gpckoleco]

I agree.

[@natebolton9385]

HP's own videos state this. However they also say to remove the whole display assembly before doing this.

[@kenben8207]

you had luck because you didn't remove battery.

[@haraldschurr1035]

not removing the battery is not critical as long as you don't wobble around with the video connector too much while connecting it to the screen.

[@kenben8207]

@@haraldschurr1035 bull shit ; ) dead motherboard is the consiquence in most cases

[@haraldschurr1035]

@@kenben8207 I am doing it all the time and I didn't kill a single motherboard with about at least 50 screen swaps.