how to replace a pressure switch on a well system

In this video, I'll show you how to replace a pressure switch on a well system. My old pressure switch became all rusty and stopped working so I had to install a new one. Install a pressure switch is very simple but it's important you follow these simple steps.
How to adjust pressure tank: • how to check and adjus...
Pressure Switch Troubleshoot: • why is my pressure swi...
**Tools You Need**
New Pressure Switch (40/60): amzn.to/2IXIhK7
Square D Pressure Switch (30/50): amzn.to/3lU68si
1/4 NPT Nipple: amzn.to/3lYJFdW
Channel Locks: amzn.to/333ubO0
Neednose Pliers: amzn.to/3390L1g
Wire Strippers: amzn.to/3pMiWn0
Teflon Tape: amzn.to/395WeAu
Blue Tape: amzn.to/2IOS3OR
My goal is to share different how to fix, how to install, and how to build videos that will help you become a jack of all trades. If you’re interested in learning about nifty home improvement and start doing diy projects, you’ve come to the right place!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
CONNECT WITH ME
Instagram ► / daddicated
Twitter ► / daddicated1
Website ► www.daddicated...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
My name is Andy and on the Daddicated channel I’ll show you nifty how to videos that will help with your next home improvement project.
Subscribe for home renovation, diy, and how to videos.
Subscribe ► goo.gl/N5rAaS
The information on this KZbin Channel and the resources available are for educational and informational purposes only.
well pump pressure switch troubleshooting
how to wire a pressure switch
well pressure switch
water pump pressure switch diagram
well pump pressure switch replacement cost
well pump pressure switch sticking
how to tell if well pump pressure switch is bad
low pressure cutoff switch troubleshooting
How do you know if your pressure switch is bad?
What happens if pressure switch goes bad?
How do you adjust a pressure switch on a well pump?
How much does it cost to replace a pressure switch?

[@Daddicated]

***Tools You Need*** New Pressure Switch (40/60): amzn.to/2IXIhK7 Square D Pressure Switch (30/50): amzn.to/3lU68si 1/4 NPT Nipple: amzn.to/3lYJFdW Channel Locks: amzn.to/333ubO0 Neednose Pliers: amzn.to/3390L1g Wire Strippers: amzn.to/3pMiWn0 Teflon Tape: amzn.to/395WeAu Blue Tape: amzn.to/2IOS3OR (affiliate links)

[@themoonlitquill]

My pressure switch just bit the dust. The left side broke off somehow, and when I found the contact just hanging there, I tried to get it out and it fell down the well 😭. It needs to be replaced, and I am NOT going to try to do this by myself, as I'm just not as savvy as you are. That said, this was a very good video for those who are savvy! I'm just glad it turned out to be an inexpensive part rather than the actual pump or the pressure tank! That would've been a nightmare to afford in this economy! Thanks for taking the time and have a blessed day!

[@CryoSignal]

Thank you for making this video. It's super short and really informative. My dad passed recently and it's been a bit overwhelming trying to keep up with my house. I'll definitely check out your other videos, this video made the well pump job a breeze.

[@Daddicated]

I'm sorry for your loss. I'm glad that my video was helpful. If you have any questions reach out I'll do my best to answer based on what I know.

[@waynetracy5652]

I’m in the exact same situation. Father passed away last year from Covid and been trying to keep up maintenance for my mom. Hard to believe how things tend to fall apart so quickly and how much work people were putting in to keep a home running. Hope you’re doing well as you can with your loss.

[@ItchyKneeSon]

Nice how-to. Thank you! My only suggestion would be to wrap all wires clockwise around the screws on the contacts. This will draw the wire into the contact as you tighten. Sometimes, if they're wrapped counterclockwise they can push the wire away as you tighten.

[@Daddicated]

Good tip. Thanks. I always get the directions confused especially when I’m using Teflon tape on pipe threads. Lol

[@eatswithtwofists2965]

​@Daddicated which way do you wrap the Teflon? As others have stated thank you for this 🙏🏾 it is amazing how poorly designed and made these systems are, everyone needs to learn how to maintain

[@nikra6274]

Thanks for tip on labeling wires made replacing much easier

[@Daddicated]

No problem.

[@davidmeehan4486]

Excellent video. I just used this to replace my pressure switch, restoring water to my house before noon. Thanks for pointing out the precautions necessary to avoid death by electricity. I loved the tip about labeling the wires too. Keep being awesome.

[@Daddicated]

Glad I could help. Thanks for sharing.

[@rona1320]

Thanks, I needed to see the correct wiring sequence and you did great at showing it.

[@Daddicated]

Glad I can help.

[@jascam1]

Some of the so-called pros videos should check out your simple and correct video, only improvement would be to point out center terminals go to the pump. Good job.

[@Daddicated]

Thank you. I appreciate your feedback.

[@cameronjones7735]

Simple and quality video! Easy to follow and even easier to sit through!!

[@Daddicated]

Thanks

[@kv6256]

You rock , dude. thanks

[@holocaust_2.0]

Thanks for this! Just bought my first house and my pump stopped working, figured it was the switch and it seemed simple enough to replace and this video verified the simplicity of replacing it. Hope the switch is the problem. Edit: Do you have any videos on replacing the solenoid? If not, can you make one?

[@Daddicated]

No I don’t have a video for replacing a solenoid. Good idea on making one maybe in the future I’ll make one but for know let me try to walk you thru it. So the installation is fairly easy especially if you are replacing existing one. Make sure you take pictures of the wiring and wire the new one the same way. The way it works it basically activates when it receives power so keeps it open or it closes when it loses power. This is considered normally closed. Now they have also normally open to where it’s the opposite. Where it is open position when no power and closed position when there is power. So as long as you buy the right one and replace your existing one you should be good. As far as the connecting the pipes to the valve itself usually it’s some threaded fittings that you need to connect between your pvc pipe and your metal valve. Best thing to do is figure out the size of your pipe, take the valve to Home Depot and see what fittings it would take to make the connection. Ask someone in plumbing to help you if needed. Let me know if you have any other questions.

[@holocaust_2.0]

​@@Daddicated​great walkthrough, thanks! Going through your video repertoire during my downtimes at work. As a new home owner who never had a dad, youtube has been a godsend for teaching me the ins and outs of these things!

[@Daddicated]

Lol. Thanks for watching. I'm not a pro by any means but I enjoy sharing what I'm learning myself. I learned some things from doing tile with my dad as a teen but a lot of other things learning the same as you. Just trying and doing my own research. Couldn't agree more that KZbin is the best place to learn this stuff. Anyway, I'm glad I can be of any help.

[@andye013]

Very helpful, thank you!!

[@Daddicated]

Glad I was able to help

[@aiyayayy]

Excellent video, doing this tomorrow😂

[@Daddicated]

Thanks.

[@aiyayayy]

@@Daddicated had to pause, the connection between the main and the switch is so rotten I have to put in a new T and connector pipe…great fun lol

[@caiman114]

Did the 220 get you?

[@aiyayayy]

@@caiman114 220 222 whatever it takes!😂😂😂

[@Daddicated]

@@aiyayayy lol

[@AllthingsHatala]

The metal piece that connects on one side broke off on mine , so I took a penny and wrapped it in aluminum foil and stuck in there , wrapped the tail of the foil around the wire to secure it 👍🏾 💅🏽

[@Daddicated]

Nice. That’s what I call innovation. Lol

[@AllthingsHatala]

@@Daddicated thanks ☺️

[@buffordevans6942]

Thanks My breaker keeps throwing 🤞🏻that this will help

[@stinkingboot1119]

Did this ever solve your breaker kicking problem?

[@dschwep7]

Thanks !

[@Daddicated]

No problem. Glad I could help.

[@ericg5877]

How would I release the pressure if my system doesn't have a pressure valve like yours?

[@Daddicated]

Open a valve somewhere down stream of the process.

[@CL-ty6wp]

never seen a well pump outside. Usually in the basement.

[@Daddicated]

In Florida they are all outside. We don’t have to worry about freezing temps that’s probably why.

[@holocaust_2.0]

@@Daddicated we also don't have basements in FL lol.

[@nomaderic]

I've never seen one in a basement, I also never seen a basement lol. I live in south texas, all our wells are outside

[@todd636]

Just found your channel. Looking forward to checking out more videos. Just got a house with a well system. Know nothing about them. Everything has a small leak so wanted to replace everything. My system doesn’t have an external pressure switch like your replacing. Is it built into the pump? Can that be replaced? The system is not easy to get to so I want to do as much as possible when I’m down there

[@Daddicated]

Congrats on your new home. It’s nice to have your own place but like you said there is always something that needs to be replaced or repaired. I have a ton of different tutorials so feel free to check them out. It’s hard to tell what your system is like without actually seeing it. I doubt that the pump has built in pressure switch since usually pumps don’t have them but I’m not 100% certain so maybe it’s somewhere else.

[@carllayne83]

Pro huh!

[@Daddicated]

Nah just a diy trying to figure out stuff and sharing with others.

[@Kgthrow]

Do you have to relive pressure in tank first?

[@Daddicated]

Yes.

[@tuberez]

I'm using 12volt pump off grid. How would I wire this switch? Would i need 120volt still to switch?

[@Daddicated]

Not too sure. Sorry.

[@craigsterner3546]

Hey Andy, in your parts section you listed going from a 30/50 to a 40/60 PSI pressure switch. Is that correct? I always thought that you needed to stay with the original PSI which would be the 50/60. No?

[@craigsterner3546]

sorry about the confusion switch that last 50/60 to the 30/50 in my comment.

[@Daddicated]

Yeah I would stick with your original. I just had multiple in the parts section in case someone needs a 40/60.

[@craigsterner3546]

Thanks Andy. Just subscribed. You do real good work and super presentations.@@Daddicated

[@ApplexDanger]

My oressure switch keeps braking every couple months. Like i have to give it a snock for it to turn on

[@Daddicated]

Could be ants getting in between the contacts. I had that happen before. Have you tried replacing it?

[@lowbrassrules]

I have no valve to release the pressure. Help???

[@ffffnnnnul2125]

Turn on a faucet to drain the water somewhere else in the system

[@Daddicated]

What the previous comment said, just open any sink valve.

[@ericg5877]

Awesome thank you!

[@simd510]

Since I don't feel comfortable doing this who do I call to replace it? An electrician?

[@Daddicated]

Try to find a water filtration company in your local area that installs these they will know how to replace one.

[@davidbradford9492]

My nipple fitting broke on my pressure switch they used plastic instead of brass I’m hoping I can just replace the nipple fitting however the nipple fitting broke inside the pvc pipe and other piece broke in bottom of pressure switch

[@Daddicated]

Ooo, I’m not sure. U might be able to take the broken pieces out.

[@Keboncito]

hi, my tank doesn’t have the bottom valve to drain the water what do i do

[@nomaderic]

It's probably just in another spot. There should be something you turn that makes water start coming out. Mines not underneath its further to the left of the piping at the end.

[@Daddicated]

yeah I agree with @nomaderic, it should be there somewhere.

[@Keboncito]

alr thank thank u

[@willjones8591]

Open a faucet in your yard after cutting power to your pump, your tank pressure will dissipate. Sometimes there's a valve on the water line just outside of the tank. That would be the best way.

[@Dan-pt2tn]

The water just keeps shooting out no matter low long I wait for the tank to drain. How am I doing something wrong?

[@Daddicated]

Not sure. Hope you can figure it out.

[@Dan-pt2tn]

@@Daddicated 🤣🤣

[@clay1671]

Did you shut off the power to your well pump?

[@Dan-pt2tn]

@clay1671 Yeah, the breaker was marked wrong. I had to shut everything off, and it still took a while for the water to stop fully. Then I had to re-map the breaker so it's all correct. Smh.

[@buffordevans6942]

Still throwing the main breaker

[@Daddicated]

Umm. Not sure why.